inspection procedure 13 MITSUBISHI MONTERO 2000 Service Workshop Manual

[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2000, Model line: MONTERO, Model: MITSUBISHI MONTERO 2000
Pages: 1839, PDF Size: 29.19 MB
MITSUBISHI MONTERO 2000 Service Workshop Manual MONTERO 2000 MITSUBISHI MITSUBISHI https://www.carmanualsonline.info/img/19/57331/w960_57331-0.png MITSUBISHI MONTERO 2000 Service Workshop Manual
Search: (CD changer, open gas tank, phone, boot, battery location, alarm)

Page 357 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-143 OK Check the harness wire between the intermediate connector and the engine-A/T-ECU, and repair if necessary.NG Repair NG NG Repair NG Repair (2) NGMeasure at engine-

Page 358 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-144 Code No.24 Vehicle speed sensor systemProbable cause Range of Check DEngine: Two seconds after theengine wasstarted DIdle switch: OFF DEngine speed: 2,500 r/min or mo

Page 370 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-156 Code No.78 Accelerator pedal position sensor (1st channel) systemProbable cause Range of Check DAcceleratorpedal positionsensor (2nd channel) is normal. DCommunicatio

Page 374 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-160 Code No.89 Abnormal fuel systemProbable cause Range of Check DEngine: Being learning the air - fuel ratio Set Conditions DTen seconds or more havebeenpassed while the

Page 380 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-166 INSPECTION CHART FOR TROUBLE SYMPTOMS Trouble symptomInspection procedure No.Reference page CommunicationCommunication with all systems is not possible.113A-169 with

Page 383 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-169 INSPECTION PROCEDURE FOR TROUBLE SYMPTOMS Inspection procedure 1 Communication with all systems is not possible. Probable cause The cause is probably a defect in the

Page 384 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-170 Inspection procedure 3 The engine warning lamp does not illuminate right after the ignition switch is turned to the ON position. Probable cause Because there is a bur

Page 385 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-171 Inspection procedure 5 No initial combustion (starting impossible) Probable cause In cases such as the above, the cause is probably that a sparkplug is defective, or

Page 386 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-172 OK Check the following items in that order. DCheck the sparkplug DCheck the compression pressure DCheck if foreign materials (water, alcohol, etc.) got into fuel. OK

Page 387 of 1839

MITSUBISHI MONTERO 2000 Service Workshop Manual GDI -Troubleshooting <A/T>13A-173 NGReplace the injector.Check the trouble symptoms. OK Check the following items in that order. DCheck the sparkplug DCheck the compression pressure DCheck the fuel li
Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 ... 260 next >
Search: (jacking, gas type, service, fuel additives, airbag disable, clock reset)