suspension MITSUBISHI MONTERO 2000 Service Repair Manual

FRONT SUSPENSION
Click on the applicable bookmark to selected the required model year.


www.WorkshopManuals.co.uk


Purchased from www.WorkshopManuals.co.uk

33A-1
FRONT
SUSPENSION
CONTENTS
GENERAL INFORMATION 1..................
SERVICE SPECIFICATIONS 3.................
SPECIAL TOOLS 3..........................
ON-VEHICLE SERVICE 4.....................
Wheel Alignment Check and Adjustment 4.......Ball Joint Dust Cover Check 6..................
UPPER ARM ASSEMBLY 7...................
SHOCK ABSORBER ASSEMBLY 10.........
LOWER ARM ASSEMBLY 13................
STABILIZER BAR 16........................


www.WorkshopManuals.co.uk


Purchased from www.WorkshopManuals.co.uk

FRONT SUSPENSION -On-vehicle Service33A-6
SIDE SLIP
Measure the side slip with a side slip tester.
Standard value: 0±
3mm
BALL JOINT DUST COVER CHECK
1. Check the dust cover for cracks or damage by pushing
it with finger.
2. If the dust cover is cracked or damaged, replace the
lower arm assembly or stabilizer link.
NOTE
Cracks or damage of the dust cover may cause damage
of the ball joint.


www.WorkshopManuals.co.uk


Purchased from www.WorkshopManuals.co.uk

REAR SUSPENSION
Click on the applicable bookmark to selected the required model year.


www.WorkshopManuals.co.uk


Purchased from www.WorkshopManuals.co.uk

34-1
REAR
SUSPENSION
CONTENTS
GENERAL INFORMATION 2..................
SERVICE SPECIFICATIONS 3.................
SPECIAL TOOLS 3..........................
ON-VEHICLE SERVICE 4.....................
Wheel Alignment Check and Adjustment 4.......
Ball Joint Dust Cover Check 5..................
UPPER ARM ASSEMBLY 6...................SHOCK ABSORBER/COIL SPRING/LOWER
ARM ASSEMBLY 9...........................
STABILIZER BAR 11.........................
TOE CONTROL ARM ASSEMBLY/TOE
CONTROL TOWER BAR 13..................
TRAILING ARM ASSEMBLY 16..............


www.WorkshopManuals.co.uk


Purchased from www.WorkshopManuals.co.uk