MITSUBISHI OUTLANDER 2014 3.G Owners Handbook

9TECHNOLOGY
m

ulti
i
nformation Display
s
witch
k

eyless
e
ntry
s
ystem
s

tart/
s
top
e
ngine
s
witch (if equipped with
f
.

a
.
s
.
t
.-key)
F.A.S.T.-Key Normal Key
1. LOCK () button
2.

UNLOCK (
) button
3.

Power liftgate button
(if equipped)
4.


PANIC button
5.
o
peration indicator light
If the F.A.S.T.-key is not operating properly
i

nsert the
f
.

a
.
s
.
t
.-key into the key slot in the instrument panel. s

tarting the engine and changing the operation mode should be
now possible. Remove the
f
.
a . s . t
.-key from the key slot after
starting the engine or changing the operation mode.e

ach time the multi information display
switch is operated, the buzzer sounds and
the multi information display changes
between information such as warnings,
trip odometer, average and momentary fuel
consumption, distance range, etc.
while carrying the f. a . s . t.-key , press
the driver’s or front passenger’s door
lock/unlock switch A .
A
while carrying the f. a . s . t.-key within the operating range, the s tart/ s top button can be used to start the engine.
•
m
ove the selector lever in “P” position and hold the brake pedal do\
wn, push the s tart/ s top button.
•
to stop the engine, stop the vehicle completely and move the selector lev\
er in “P” then press the

s tart/ s top button.
* If you have to bring the engine to an emergency stop while driving, pr\
ess and hold the Start/Stop button for 3
seconds or more, or press it quickly 3 times or more.
•
i

f you press the s tart/ s top button without depressing the brake pedal, you can change the operat\
ion mode in the
order of
off
,
acc , on , off
.
•
i

f the engine cannot be started or the operation mode cannot be changed, \
check the position of the f
.
a . s . t
.-key or
the battery performance of the

f
.
a . s . t
.-key
.

1. Park your vehicle in a safe place and turn the ignition switch to
lock
position.
2.
c onnect the cable
 (cable is not included with the vehicle) to the
U
sb
memory device
 or the Dock connector  to the iPod .
3.
o
pen the cover
 in the floor console box. connect the cable  to
the U
sb
input terminal
.
4.
t
urn the ignition switch to the “
acc ” position. t
urn on the audio
system.
5.


Press E

several times to switch to the U sb mode. t he input mode
changes as follows:
CD  USB  Bluetooth® (if equipped)
6.

Depending on your U

sb
device, it may take longer for playback to
start.
7.
o
nce the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5.

Press MENU

on the touch screen.
6.
t
ouch USB.
7.

t
ouch

then select a track and begin playback.
10AUDIO SYSTEM
NOTE: Please refer to your o wner’s m anual for more detailed information on
how to use your audio system.
Usb and iPod input (if equipped)







audio Remote
c
ontrol b utton
(if equipped)
VOLUME UP
VOLUME Down
SEEK
c

hange
station or
track MODE
c

hange the
audio source

C
D
B
E
A
To enter frequencies into the memory (AM/FM/SAT)
1.

Press A

to turn on the audio system.
2.

Press B

to select the desired band ( am / fm / sat ).
3.

Press C

to s eek s tation
4.
h old down one of the m emory select buttons D (1-6) until it
beeps in order to save that station to memory.

11DISPLAY AUDIO SYSTEM (if equipped)
system settings
system related settings, such as the operation sound and the
time, can be made.
1.

Press the
MENU key. t he top menu is displayed.
2.
t
ouch
Setting, and then System Setting.
listening to the Radio
this explains how to listen to am and fm radio broadcasts. hD Radiotm
broadcast or analog broadcast can be received.
1.

Press the

MENU key.
t
he top menu is displayed.
2.
t
ouch

AM or FM.
t
he radio broadcast information screen is displayed.
3.
t
ouch

TUNE to tune in a station.
t
he station at the selected frequency is
played.
PSD

Program

s
ervice Data:
c
ontributes to the superior user
experience of
h
D Radio
t
echnology

. Presents song name, artist,
station
i
Ds,
h
D2/
h
D3
c
hannel
g
uide, and other relevant data
streams.
HD2/HD3

a
djacent to traditional main stations are extra local
fm

channels.
t
hese
h
D2/
h
D3
c
hannels provide new, original music
as well as deep cuts into traditional genre.
Digital Sound

Digital,

c
D-quality sound.
h
D Radio
t
echnology enables local
radio stations to broadcast a clean digital signal.

am
sounds like
today’s
fm
and
fm
sounds like a
c
D.
The system setting screen is displayed.
This is a setting item displayed by touching Time Setting.
Settings name Settings value Settings content
Time
Adjustmen tTime
Touch the corresponding or and change the date and time.
Time Display
Settings Date
The date and time display format can be set.
Time12h or 24h display can be set.
this hD Radio receiver enables:

12DISPLAY AUDIO SYSTEM (continued) AND HD WEATHER AND FUEL (navigation only)
1. Source plate - Displays the name of the currently selected source, preset channel
number, reception frequency, and station name.
2.

HD Radio TM indicator - Displayed during digital sound output.
3.
Preset switch - a llows you to register your favorite broadcast stations.


t
ouch and hold the switch for the desired preset channel number until you\
hear
the “beep”.

t his registers the broadcast station currently being received.
**

→“Register Your Favorite Broadcast Stations”
4.

 - touching it displays the sub-menu. t he Scan, Radio Setting, Sound
Control settings can be made.
5.

- Used to change the frequency. t
ouching and holding until you hear the
“beep” starts automatic station selection (seek).
**

→“Starting the Seek”
6.

SSN - Displays the ssn ( s hort s tation n ame) that is currently being received.
i

f there is a sub-channel, the received channel number/total number of su\
b-
channels is displayed.
7.

PTY - Displays the P t Y (Program t
ype) being received.
8.


Info - s witches to information display.
9.

Station List
- Displays a list of the stations that can be received.
**

→“Search for Broadcast Stations from the Station List”
10.

FM1, FM2 - a llows you to register your favorite 6 stations for each band.
11.

Title - Displays the acquired title name.
12.

Radio Text - During analog reception, “ t
itle” changes to “Radio
t
ext”, and the
acquired radio text is displayed.

t he “artist” and “album” are not displayed.
13.

Artist - Displays the acquired artist name.
14.

Album - Displays the acquired album name.
15.

Indicator - LIVE:
l ive event broadcasts are displayed as they are received.
RBDS:

R b D s data is displayed as it is received.
16.

Switch page - i f the title, artist name, and album title cannot fit in one page, the \
display can be switched to Page 2 and beyond.
17.

Preset - s witches to preset display.
** s ee Display a udio o wner’s m anual
from the navigation screen press on the Info buttont
hen press on HD Information
t

hen press on WEATHER or FUEL PRICE
fm Radio broadcast information screen (Display audio system only)h D weather and f uel Prices ( n avigation s ystem only)
3)
4) 1)
8)
6)
5)
2)
9)7)10) 16)11),12)13)14)
17)
15)
HD Weather
HD Fuel Price
12

13BLUETOOTH® OPERATION WITH DISPLAY AUDIO AND NAVIGATION SYSTEM (if equipped)
c
alling by e ntering a t
elephone
n umber
1. on the mobile phone screen, enter the telephone number.
2. touch the “OFF HOOK” key.
making a call from a Phonebook
1. Display the vehicle phonebook screen
or the mobile phonebook screen.
**

→ “Display the Phonebook”
2.
s elect and touch the person to call.
incoming calls
the audio guide sounds and the
incoming call screen is displayed.
Registering a bluetooth® Device
Register a bluetooth® device with this product.
1.
Press the
MENU key. t he top menu is displayed.
2.
t
ouch Setting

, and then Bluetooth
® Setting.
3.
touch Register Device
.
4.

Enter the pass key displayed on the screen into the Bluetooth® device.
f

or a list of compatible
b
luetooth
® devices please go to
http://www.mitsubishicars.com/owners
SPEECH button:
c

hange to voice
recognition
PICK-UP button:
a

nswer an
incoming call
HANG-UP button
e

nd a call or voice
recognition
A
B
C
when the connection is complete, a screen is displayed for selecting
the b luetooth® device. for details, refer to the user manual for the b
luetooth® device.
“off hook” key
3. touch the telephone number to call.
4. touch Ye
s.
**see Display audio owner’s manual
ABC
bluetooth® controls

search for a location
14NAVIGATION SYSTEM (if equipped)
Way Points – once you have set a destination, you can enter additional stops along the\
way called way Points. f or details on how to set way Points refer
to your n avigation o wner’s m anual.
Saving Addresses -
t
o save an address, first enter the address into the system.
t hen touch Address Book and confirm location to be stored.
touch

Set to Address Book to complete.
Set Your Home as the Destination
You can set your pre-registered home as the destination.
1.

Press the
key.


t his displays the destination menu.
2.
T
ouch Go Home. t his displays the guidance start screen.
Search from Addresss
earches for a location from an address.
1.

Press the
key.


t his displays the destination menu.
2.

T
ouch Address/Intersection.
3.

T
ouch the item, then input the address.
To Activate the Navigation Voice Command:
1. Push and hold the SPEAK button down on the steering wheel
for a couple of seconds.
2.
t
o activate the navigation voice command, touch the
SPEAK
button on the steering wheel and you will engage only that
system.
4.

T
ouch Set.
t

his displays the guidance start screen.
ADVICE
• Touching Last 5 allows you to select from among the last
5 searches.
•
All Intersections can be selected when the street is input.
• Depending on the state of the information recorded in the
map data, representative locations for that area may be
displayed.
3.


T

ouch Start.
the search for the route with your home as the
destination is complete and route guidance
starts.
NOTE
•
If a route using the HOV lane is in the
search result with set conditions, a
message confirms the use of the

ho V
lane is displayed.
Y

es: s earch for a ho V lane route.
No:

s earch for a non- ho V lane route.

15NAVIGATION SYSTEM (if equipped)
g

uidance
s
tart
s
creen
this is the screen displayed when the location to set as the destination \
is decided.
t

his section explains the operations you can do on this screen.
1.

Location information


w hen such location information as the “establishment name”, “str\
eet name”,
“city name”, “country name”, “latitude”, “longitude\
”, or “telephone number”
has been obtained, it is displayed.
2.
Start


t he search is executed and route guidance is started.
3.
Dial


i f a mobile phone is connected, you can call the establishment.
→

“Call a Telephone Number Registered on the Map”
Refer to the

n avigation o wner’s m anual for further instructions.
4.

Home


i f your home is not registered, you can register the searched for locatio\
n as your home.
5.

Show Route


s ets the currently searched for location as the destination and shows a s\
imple sketch of the route. You can check the route and change the
search conditions.
→

“Show Route”
Refer to the

n avigation o wner’s m anual for further instructions.
6.

Itinerary List
Y

ou can change the destination, add waypoints, and change the route searc\
h conditions.
→

“Set and Change a Waypoint”
Refer to the

n avigation o wner’s m anual for further instructions.
7.

Address Book
Registers the search for location in the address book.
→

“Set an Address in the Address Book”
Refer to the

n avigation o wner’s m anual for further instructions.
8.

Adjust *
Y

ou can scroll the map and change the location.
*

w hen the destination setting is set when scrolling the map, it is not dis\
played.
1)
3) 5)6)
7)
8)
4)
2)

16
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® Hands Free System?
a

:
c
heck the list of compatible phones, www.mitsubishicars.com/owners to see if the phone is b luetooth® supported.
Q.

Why doesn’t my device (USB, iPhone, Bluetooth® Audio, etc.) work?
a

:

Y

ou need to press the
m
ode button to select the appropriate device you want to use.
Q:

How do I use Bluetooth® Audio (if equipped)?
a

:

Please refer to your

o
wner’s m anual for instructions.
Q:

Why does my Anti-Lock Braking System (ABS) make a noise?
a

:
e
ach time your vehicle is started and driven a short distance, you will h\
ear the sound of the abs motor operating from the right front engine
compartment.
t
his is the normal sound the a nti- l ock b raking s ystem makes when performing a self check.
Q:

Why does the Audio System take so long to upload my music from my audio \
music device?
a

:
t
he
m
itsubishi system can read multiple device structures in order to catalog\
the music files for easy playing and listening. Depending on the amount
of music you have on your device, this may take a few minutes.
Q:

What are the different ways of playing music from my portable music play\
er through the stereo system in my vehicle, when equi
pped with the FUSE Hands-free
Link System™?
a

:
t
here are three ways of playing music through your vehicle’s sound system.
• USB

port

-

The

FUSE system will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have the
f
U
se
system find and play the song in your device that you prefer without \
physically searching your device. t his is done via voice commands.
• Bluetooth
® streaming - once your device is paired to the fUse system, you can stream music from your device through the fUse system to your
vehicles sound system. n o wires or cords. Your music stops and restarts at the same song when you exit and when you\
re-enter the vehicle. Voice
commands are not available.
Q:

Why can’t I control the music track selection via voice commands whil\
e Bluetooth® streaming?
a

:
t
he
m
itsubishi system uses
a
VR

c
P 1.3 (
a
udio/Video Remote
c
ontrol Profile) which does support song information (title, artist, \
track, etc.). h owever,
you must have a device that also supports
a
VR

c
P 1.3 to supply that information to the m itsubishi system.
Q:

My Outlander is equipped with “Micron Air Filtration”. Where is th\
e filter located and does it need servicing?
a

:
t
he micron air filter is a small filter element which is located in t\
he
h
V
ac

box just behind the lower glove box. t he filter should be inspected
frequently for debris.
t
he filter works well at filtering incoming air however the filter \
will clog and lead to reduced outlet air volume if not serviced on a
regular basis.
Q:

I am having trouble with my Power Liftgate working properly

. Sometimes it works and sometimes it doesn’t. Am I doing something w\
rong?
a

:
f
irst check the ACTIVE/OFF button located below the climate control unit and check to see that thi\
s button is set to ACTIVE. i f so, then you will find that
the system needs to have
all
the doors unlocked for the unit to work properly. i f only the driver’s door is unlocked, the power liftgate button will not
work.
FAQ’s

17FAQ’s
Q: My Outlander has two 12V accessory outlets. What devices can be plugged \
into these outlets?
a
: b oth of these outlets are protected with 15 amp fuses. a lways check the current draw rating of any device prior to use in the ve\
hicle. i f the
device is rated above 12 amps, this could lead to circuit overload and t\
he electrical fuse opening (no current flow).
Q:

How can I get the MPG stated on the window sticker?
a

:
V
ehicle driving styles will greatly affect m P g . a
void sudden abrupt starts from a stop and let the vehicle coast to the t\
raffic light.
b oth of these
styles will increase mileage and reduce brake lining wear.
• Vehicles
are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 65 mph.
• Under
inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon.
Proper tire pressure also ensures optimum tire performance (including t\
ire wear

.)
Q:

How does the Navigation System choose a certain route?
a

: t he system takes into account traffic conditions, road types, distance \
and road width to recommend the route.
Q:

Why do my Rain Sensing Windshield Wipers operate on their own when it’\
s not raining?
A: • When
the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers.
• The
wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor
or when the windshield is frosted over

.
• To
stop the wipers, place the lever in the OFF position.
Q:

Why does my check engine light come on after I put gas in my car?
a

: t here are many reasons why your check engine light may illuminate. b efore calling your dealership, make sure the fuel cap is fully engaged a\
nd
you have heard three clicks when tightening it.
a fter checking and hearing three clicks and the light is still on, contac\
t your dealership.
Q:

How do I use the emergency key when the F
.A.S.T.-key battery or vehicle battery is run down?
a

: i f your o utlander is equipped with a o ne t
ouch
s tart button and the door does not open, take the key out from the fob an\
d unlock the door
manually. Put the key back into the fob and insert it into the slot provided bel\
ow the
c limate c ontrol s witches. s tarting the engine and charging
the operation mode should now be possible. Remove the
f
.
a . s . t
.-key from the key slot after starting the engine or charging the operat\
ion mode.

Owner’s Handbook
ACAD-P08000 (4/13)
www .mitsubishicars.c om
2014 OUTLANDER
2014 OUTLANDER
Dieline -DO NOT PRINT!