Oil change MITSUBISHI PAJERO 1996 2.G Owners Manual
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1996, Model line: PAJERO, Model: MITSUBISHI PAJERO 1996 2.GPages: 302, PDF Size: 48.23 MB
Page 111 of 302
Downloaded from www.Manualslib.com manuals search engine KAYNNISTYS JA AJO . STARTING AND DRIVING
Suurin sallittu vetokoukun palloniveleen kohdistuva
kuormitus
Alkaa koskaan ylittakb Teknillisissa tiedoissa ilmoitettua sail it
tua kuormitusta. (Katsokaa sivua 115.)
Kayttovihjeita
(1) Alkaa antako kytkimen luistaa (ajoneuvoissa joissa on
kasivaihteisto ainoastaan). alk aaka lisatkb kayn-nistaessanne tarpeettomasti moottorin nopeutta. (2) Alkaa ylittakb nopeutta, joka on suosite ltu peravaunua
hinattaessa .
(3) Valttaaksenne tybntbjarrusta johtuvia tbytaisyja painakaa jarrupoljinta ensin kevyesti ja sitten voimakkaammin. (4) Saadaksenne tayden hybdyn moottorijarrusta vaihtakaa
pienemmalle ennen alamakea . (5) Peravaunun hinaaminen tuottaa lisarasitusta rungolle, jarruille, kytkimelle ja alustalle. (6) Peravaunun paino ja suurempi kitka ja ilmanvastus lisaavat polttoaineenku lutusta.
lisavarotoimenpiteita ajoneuvoille joissa on auto
maattinen vaihteisto
Asentoa "2" suositellaan kaytettavaksi rinteissa tai alhal-sella nopeudella ajettaessa. Kayttakaa asentoa "L" vuoristoteilla,
koska silloin moottorijarru toimii parhaiten edesauttaen nain
jarrujarjestelmaa. Varmistakaa kuitenkin etta nopeus ei ylita valitulle vaihteelle asetettua nopeusrajoiutsta.
Mita tulee maksiminopeuteen, katso kohtaa "Mahdollinen ajonopeU(>" sivulta 131.
116
Maximum trailer-nose weight
Never exceed the maximun trailer-nose weight as listed in the specifications. (Refer to page 115.)
Operating hints
(1) Do not let the clutch slip (vehicles with a manual transmission only) and do not increase the engine speed more than necessary when starting. (2) Be sure that the driving speed does not exceed the maximum speed for trailer operation. (3) To prevent shocks from the overrun brake, depress the brake pedal lightly at first and then more strongly. (4) To make full use of engine braking, change to a lower gear
before descending a slope . (5) The body, brakes, clutch, and chassis will be under addi tional strain when towing a trailer . (6) The heavier weight and the higher rolling and air resistance
w ill increase fuel consumption.
Additional precautions for vehicles equipped with
an automatic transmission
It is recommended the "2" position on slopes or at low speed.
Us e the "L " position in mountainous areas in order to make
better use of engine braking and to assist the brake system. However, be sure that the speed does not exceed the maximum speed limit for the selected gear.
For
maximum speed, refer to the description of the "Possible driving speed" on page 131.
Page 139 of 302
Downloaded from www.Manualslib.com manuals search engine KAVNNISTYS JA AJO, STARTING AND DRIVING . . . .
Vivun kay to (Automaattisilla na
palukoilla varustetut ajoneuvot) . HI31D ·B
¢ "2H" -> "4H"
Vipua voidaan kayttaa tiilla tavalla ajo
neuvon ollessa pysahtyneena painet
taessa tai painamatta kytkinpoljinta.
HUOM Kun vipu on asetettu asentoon "4H" ja
on ajettu pienen matkaa. napalukot lukkiutuvat automaattisesti ja ajoneuvo kyt
keytyy nelipyoravedolle.
_ "
4H" ~ "N" ~ "4L"
Vipua voidaan vaihtaa naiden asentojen valilla ajoneuvon ollessa pysahtyneena ja kytkin poljettuna tai vaihd evipu va
paalla .
~ "4H" .... "2H"
Vipua voidaan vaihtaa naiden asentojen
valilla ajoneuvon ollessa pysahtyne ena tai sen liikkuessa painettaessa tai paina
matta
kytkinta.
N
71 EOOJ2
N
71EOOJ2
Lever operation
equipped with
free-wheeling hubs)
¢ "2H" -> "4H"
(vehicles
automatic
F I3 1D ·A
The lever can be operated in this way while the vehicle is stopped. with or without depressing the clutch pedal.
NOTE After the lever has been set to the "4H" position and the vehicle is driven a short
distance. the free
-wheeling hubs will automatically lock and the ve hicl e will change to four-wheel drive.
_
"4H" ~ "N" ~ "4L "
The lever can be operated between these
positions
while the vehicle is stopped and the clutch pedal depressed. or the
tran smissio n shift lever is set to neutral
position .
~ "4H" -> "2H"
The lever can be operated in this way
while the vehicle is either stopped or moving. with or without depressing the
clutch pedal.
143
Page 154 of 302
Downloaded from www.Manualslib.com manuals search engine KAYI\INISTYS JA AJO ' ,', , , :. .' '. StARTING ANli'PRIVI~G;
Jyrkissa kulmissa kaantyminen < Lukuunottamatta
"4H" (Super select 4WO) >
Nelipyoravedolla jyrkissa kulmissa kaannyttaessa kay samoin
kuin jarrutettaessa vastaavassa tilanteessa. Tata kutsutaan ohjauksen sortamiseks i, joka johtuu si ita , etta kaikki pyorat ovat eri etaisyyde lla kulmasta. Tama ilmio on nelipyoravetoisille ajoneuvoille ominainen . Nain kaydessa suoristakaa ohj au spyora , tai
vaihtakaa kaksipyoravedolle.
Joen ylitys
Nelipyoravetoiset ajoneuvot eivat valttamatta ole vedenpitavia. Jos niiden sahkopiirit paasevat kastumaan , kay ajaminen mah dottomaksi, joten valttakaa jokien ylittamista mikali mahdollista. Mikali sita ei voida valttaa toimikaa se uraavasti :
(1) Valitkaa ylityspaikka, jossa veden korkeus on yli 50 cm. (2) Asettakaa valitsin asentoo n "4LLc" (Super select 4WD) tai "4L" (osa -aika 4WD)
(3) A jakaa hitaasti noin viiden kilometrin tuntinopeudella valt
taaksenne turhan veden roiskumisen.
158
Turning sharp corners < Except "4H" (Super select
4WO»
When turning a sharp corner in four-wheel drive , the same
thing that happens w hen doing so with the brake applied may occur. This is call e d tight corne r braking, and results from each of the four ty res being at a different distance from the corner.
Th e phenomenon is peculiar to four-wheel drive vehicles. If this occurs, either str aighten out the steering wheel, or change to two- w he el drive.
Crossing a stream
Four-w heel drive ve hicles are not necessarily waterproof. If the
e lectr ical c ircu it s become wet, further operation of t he vehicle will be impossib le ; therefore , avoid crossi ng streams unless absolutely necessary. If crossing a stream is unavoidable, us e
th e following procedure:
( 1 ) Cross at a place where the
water is less than 50 cm (1 .6 ft.)
deep .
(2) Set the transfe r shift lever to "4LLc" (Super select 4WD) or "4L" (Part time 4WD).
(3) Drive slowly at a sp eed of approximately 5 km/h (3 mph) to avoid sp lashing too much water,
Page 171 of 302
Downloaded from www.Manualslib.com manuals search engine MUKAVUUTTA M~TKANTEKOON . . '. .' . FOR P~EASANT DRIVING
Jarjestelman kaytto Himmitys
laitteena HH15B -A
1-Siiiitiikiiii sopiva liimpotila kiiiintiimiillii liimpotilan siiiitovipua.
HUOM
2
3
Moottorin jiiiihdytysnesteen liimpotilan ollessa alhainen matkustamoon tulevan ilman liimpotila ci muutu vaikka liimpotilan siiiitovipu lajtettaisiin korkean liimpotilan kohdalle.
2-Siiiitiikiiii sopiva puhallinnopeus kiiiintiimiillii puhallinnopeuden siiiitonap-pulaa. 3 -Valitkaa ilma liikuttamalla ilmanvalinnan siiiitovipua.
~ -(Ulkoilma-asento) Ulkoilma virtaa auton sisiiiin.
d:) -(Kiertoilma-asento)
HUOM
Auton sisiiilma kiertiiii. Kiiyttiikiiii tiitii asentoa
pitiiiiksenne ilman vapaana ulkoilman polystii tai
muusta saasteesta. Vipu tulee kuitenkin jiittiiii tiihiin asentoon vain viihiiksi aikaa.
Kiertoilma-asentoa tulee
kiiyttiiii vain viibiin aikaa erityisesti kylmiillii ilmalla koska muuten ilmassa oleva hoyry tiivistyy ikkunoihin.
1
70E0078
NOTE
Operating the system as a heater EH15B-A
1-Adjust to the desired temperature by turning the temperature control knob.
When the
engine coolant temperature is low, temperature of air
introduced into the passenger compartment does not change even if the temperature control knob is moved to the high temperature side. 2-Set the desired blower speed by turning the blower speed control knob. 3-Set the air selection by sliding the air selection control lever .
~ -(Outside position) Outside air is introduced into the passenger compart
ment.
~-(Recirculation position)
NOTE The
inside air is recirculated. Select this position
to keep
the inside air free of dust or other contaminants in the
outside air. However, the lever should only be leh at this
position for a short time.
Especially
during cold weather the recirculation position should only be used for a short time in order to prevent the unnecessary
formation of mist on the windows.
195
Page 172 of 302
Downloaded from www.Manualslib.com manuals search engine MUKAVUUTTA MATKANTEKOON FOR PLEASANT DRIVING
PUHALLUSSUUNTIEN VALINTA HH13D·B
Ilmavirran suuntaa vaihdetaan paina
malla muodon valintanappulaa.
-,J -(Yliiasento) Ilmaa virtaa yksinomaan matkustamon yliiosaan.
(Kaksi tasoa) -
tyyppi 1
Suuri miiiirii ilmaa virtaa etumat
kustajan kasvoille ja yliivartallolle
ja pienempi ilmamiiiirii virtaa
jalkatilaan .
,-;.;'-(Kaksi tasoa) -tyyppi 2
196
Viihiin ilmaa virtaa etumatkustajan kasvoille ja yliivartalolle ja
suurempi miiiirii jalkatilaan .
7OEOO~
-
•
• . . .. , , I ; I " .. • .. 10 _
CHANGE OF MODE SELECTION EH13D·B
To change the air outlets, turn the mode selection knob.
-;.1-(Face position) Air flows exclusively to the upper part of the passenger area.
(Foot/face position) -type 1
A large quantity of air flows to the face of the front seat passen
ger and the upper half of his
body, and a small quantity of air flows to the leg area.
,-;.;' -(Foot/face position) -type 2
A small quantity of air flows to the face of the front seat passen
ger and the upper half of his body, and a large quantity of air flows to the leg area .
Page 174 of 302
Downloaded from www.Manualslib.com manuals search engine /
M~KAVUUTTA MATKANTEKOON FOR PLEASANT DRIVING
Miten ilaman valinta muutetaan HH13E -B
~ - Normaalisti nappula asetetaan
tahan asentoon, jolloin ulkoilmaa
virtaa sisaan matkustamoon_
Kayttakaa tata asentoa
estaaksenne laseja
huuruuntumasta tai silloin kun tupakoitte.
~ -lima kiertaa matkustamossa .
Asettakaa vipu tahan asentoon
ajaessanne polyisella tiella tai
suorittaessanne pikaista lam
mitysta .
& VAROITUS Asettakaa nappula hetkeksi asantoon (d:,) ) silloin kun tarvitaan nopeata lammitysta. Jos vipu jatctaan tahan asantoon pitkaksi aikaa. seurauksena saattaa olla lasian
huurtuminen.
Puhallinnopeuden Muuttaminen HH13F-A
Puhallinta kaytetaan (vir-avain "ON-"asen-nossa) auton lapi virfaavan
ilmamaaran saatamiseen .
1-Olmavirran maara kasvaa 2-Olmavirr maara vahenee
198
70E0080
Change of air selection EH13E -B
~-Normally set the lever in this position to allow outside air to enter the passenger compartment. Use this position, to minimize window fogging or while smoking .
d:0-Air is recirculated inside the pas
senger compartment.
Set the lever in
this position when driving on a dusty road, or quick heating .
.& CAUTION Set the lever temporarily in the (d:.) position when fast heating is required. If the lever is left in this
position for any length of time. misting of the window glass may happen .
70EO081
Change of the blower speed EH13F-A
The blower can be operated (when the ignition key is at the "ON" position) to regulate the amount of air forced through the vehicle.
1 - Air
flow rate increased 2-Air flow rate reduced
Page 176 of 302
Downloaded from www.Manualslib.com manuals search engine MUKAVUUTTA MATKANTEKOON FOR PLEASANT DRIVING
Jarjestelman kaytto ilmastointi
laitteena HH16B-A
1-Saatakaa sopiva lampotila kaanta
malla lampotilan saatonuppia .
HUOM
4 2
3
Moottorin jaahdytysnesteen ollessa alhajnen matkustamoon virtaavan ilman lampotila ei muutu, vaikka lampotilan saatonappulaa liikutettaisiin korkean lampotilan puolelle.
2-Saatakaa puhaltimen nopeus kaahtamalla puhaltimen no
peuden saato-
nuppia.
3 -Valitkaa ilma ilman valinnan saatovivulla .
~ -(Ulkoilma-asento) Ulkoilmaa virtaa matkustamoon.
~ -(Kiertoilma -asento)
HUOM
Auton sisailma kiertaa. Kayttakaa tata asentoa
pitaaksenne ilman vapaana ulkoilman polysta tai
muusta saasteesta . Vipu tulee kuitenkin jattaa tahan
asentoon vain vahaksi aikaa.
Kiertoilma-asentoa tulee kayttaa vain vahan aikaa erityisesti
kylmalla ilmalla koska
Illuuten ilmassa oleva hoyry tiivistyy ikkunoihin. 200
1
70E0084
NOTE
Operating the system as an air
conditioner EH16B-A
1-Adjust to the desired temperature by turning the temperature control knob.
When the engine coolant temperature is low, temperature of air introduced into the passenger compartment does not change even if the temperature control knob is moved to the high temperature side.
2-Set the desired blower speed by turning the blower speed control knob. 3-Set the air selection by sliding the air selection control lever .
~ -(Outside position) Outside air is introduced into the passenger compart
ment.
~-(Recirculation position)
NOTE The
inside air is recirculated. Select
this position to keep
the inside air free of dust or other contaminants in the outside air. However, the lever should only be left at this position for a short time.
Espec ially
during cold weather, the recirculation position should only be used for a short time in order to prevent the
unnecessary formation of mist on the windows.
Page 178 of 302
Downloaded from www.Manualslib.com manuals search engine MYKAVUUTTA MATKANTEKOON . FOR PLEASANT DRIVING
PUHALLUSSUUNTIEN VALINTA HH13D-B
IImavirran suuntaa vaihdetaan paina
malla muodon valintanappulaa .
-;J -(Ylaasento)
\-:J
"
IImaa virtaa yksinomaan matkustamon ylaosaan .
(Kaksi tasoa) -
tyyppi 1
Suuri maara ilmaa virtaa etumat
kustajan kasvoille ja ylavartalloll e
ja pienempi ilmamaara virtaa
jalkatilaan.
\-:J'-(Kaksi tasoa) -tyyppi 2
202
Vahan ilmaa virtaa etumatkusta
jan kasvoille ja ylavartalolle ja
s~rempi maara jalkatilaan .
7OE0079
•
•
-~ -/ , .. , . .
..
.. -
CHANGE OF MODE SELECTION EH13D·B
To change"the air outlets, turn the mode selection knob.
"';J-(Face position) Air flows exclusively to the upper part of the passenger area.
(Foot/face position) -type 1
A large quantity of air flows to the face of the front seat passen
ger and the upper half of his body, and a small quantity of air flows to the leg area .
,";./,-(Foot/face position) -type 2
A small
quantity of air flows to the face of the front seat passen
ger and the upper half of his body, and a large quantity of air flows to the leg area .
Page 180 of 302
Downloaded from www.Manualslib.com manuals search engine --------------------
• • t'
MUKAVUUTTA, MATKANTEKOON ' FOR PLEASANT DRIVIN~.
Miten ilman valinta muutetaan HH14E-8 Change of air selection EH1 4 E-8
~-Normaalisti vipu asetetaan tahan
asentoon , jolloin ulkoilmaa virtaa si-saan matkustamoon. Kayttakaa tata asentoa estaaksenne la
s e ja huuruuntu-masta tai silloin
kun tupakoitte. :~<~.~~
~1
~-Normally set the lever in this position to allow outside air to
enter the passenger compartment. Use this position, to mini
mize window misting or while smoking.
~-lima kiertaa matkustamossa .
Asettakaa vipu tahan asentoon
a jaess anne pblyisella tiella tai
suorittaessann e pikaista vii
l e nnysta tai lammitysta.
& VAROITUS
...... .....
Asettakaa vipu hetkeksi asentoon (~) kun tarvitaan nopeata lammitysta.
Jos vipu jatetaan tahan asentoon pitkaksi aikaa, seu
ra uksena
saattaa olla lasien huurtuminen .
Puhallinnopeuden M uuttaminen HH13F·A
Puhallinta kaytetaan (vir-avain "ON"
asen-nossa) auton lapi virfaavan ilma
maaran saatamiseen ,
1-Olmavirran maara kasvaa 2-Olmav. ·
204
70EOO86 ~-Air is recirculated inside the pas
senger compartment.
Set the le ver in
this position when driving on a dusty road , or quick cooling or heating.
& CAUTION Set the lever temporarily in the (~) position when fast heating is required. If the button is left in this position for any length of time, misting of the window glass may happen.
70EOO87
Change of the blower speed EH13F-A
The blower can be operated (when the ignition key is at the "ON" position) to
regulate the amount of air forced through the vehicle.
1 -
Air flow rate increase 2-Air flow rate reduction
Page 212 of 302
Downloaded from www.Manualslib.com manuals search engine MUKAVUUTTA MATKANTEKOON' FOR PLEASANT DRIVING.
Tarkistakaa vintturin bljymaara kerran
vuodessa . Avatkaa tulppa, bljyn tulee
olla 0 -5 mm etaisyydella tulpan reiasta . Mikali bljya ei ole riittavasti tai se on
huomattavan likaista, ottakaa yhteys
valtuutettuun MITSUBISHI-huoltokorjaamoon bljyn lisaamiseksi tai vaihtamiseksi.
236
Check the winch oil supply once a year.
Remove the plug; the oil should be within 0 to 5 mm (0 to 0.2 in.) of the plug hole.
If there is not enough oil. or if the oil is noticeably dirty, contact an authorized MITSUBISHI dealer to have the oil re
plenished or changed as required .