wheel bolt torque MITSUBISHI PAJERO 1996 2.G Owners Manual
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1996, Model line: PAJERO, Model: MITSUBISHI PAJERO 1996 2.GPages: 302, PDF Size: 48.23 MB
Page 239 of 302
Downloaded from www.Manualslib.com manuals search engine HATATOIMENPITEITA FOR EMERGENCIES
(13)Teriispyorillii varustetuissa ajuneuvoissa asetetaan pyoriinmuttorit niin ettii niiden kartiomalliset piiiit ovat
sisiiiinpiiin. Sen jiilkeen ne kiristetiiiin kiisin, kunnes pyorii on kiinni.
Alumiinipyorillii varustetuissa ajoneu
voissa kiristetiiiin pyoriinmuttorit viiliai
kaisesti kunnes niiden laippaosa kosket
taa pyoriiii . Niiin mutterit kiinnittyviit.
& VAROITUS Alkaa koskaan oljytko pyoranmuttereita koska bljy saa ne loystymaan.
(14 )Laskekaa ajoneuvo varovasti alas ja tiukatkaa sitten jokainen mut-teri vuorollaan miiiiriitiukkuuteen.
Miiiiriitiukkuus 10 -12 kgm (100 -120 Nm)
73E0038
73E0039
(13)On vehicles with steel wheels , install the wheel nuts with their tapered ends facing inward, then
tighten by hand until the wheel is no longer loose.
On vehicles
with aluminium wheels temporarily tighten the wheel nuts until their flange section cames into contact with the wheel so that they may no longer become loose.
& CAUTION Never apply oil to either wheel bolts or nuts as it will cause them to loosen.
(14)Lower the vehicle slowly and then
alternately tighten the nuts until each nut has been tightened to the
specified torque.
Tightening torque 10 to 12 kgm (100 to 120 Nm, 72 to 87 ft.lbs .)
263