brake pads NISSAN 300ZX 1984 Z31 Brake System Workshop Manual

FRONT DISC BRAKE (CL28VA, CL28VB) - Caliper
CAUTION:
When cylinder body
IS open, do not depress brake
pedal, or piston
w~ll pop out.
1. Remove pin bolt.
SBR~
Toraue member fixing bolt- rWear indicator
2. Open cylinder body upward. Then remove pad
retainer, and Inner and outer shims
SBR825
Be careful not to damage piston boot or get oil on
rotor. Always replace shims in replacing pads.
/ / /rlnner~hm [9) 72 - 97 (7 3.9 9,53.721
Sub p~n =@ to rildlng portion
Rubber bushing
Retainer bushing Pin boot1 hetamer boot
=@ P B c IPOI~ ~utyl Cupryrill grease or rhcone-based grease Pomt =@ Rubber grease point I Always replace when disassembled (c1 N m Ikg-rn. ft-lbl
SEI3824

REAR DISC BRAKE (CL14H, CL14HB) - Caliper
Pad Replacement
CAUTION:
When cylinder body IS open, do not depress brake
pedal, or piston will pop out.
1 Disconnect parking brake cable, then remove
pin bolts
2 Remove pad retainer, pads and shims.
SBR840
SBR640
3. When inaalllng pads, retract piston into cylin-
der body by turning
it clockwise
Be careful not to damage piston boot or get oil on
rotor.
Always replace shims when replacing pads.
SBR641
Removal and Installation
Disconnect parking brake cable and brake hose,
then remove caliper assembly
u SBRB41
BR-13