Fuel injection NISSAN 300ZX 1984 Z31 Electrical System Workshop Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 1984, Model line: 300ZX, Model: NISSAN 300ZX 1984 Z31Pages: 116, PDF Size: 3.42 MB
Page 50 of 116
METER AND GAUGES - Digital Type Combination Meter
Trouble-shooting (Cont'd)
Fuel residue
Sub fuel gauge (digital display1 does not operate
Go to "Display Check"
Go to "Power Unit Check"
Replace meter Replace
and gauge power unit
assembly
Resistance
Check harness
Check fuel tank sub gauge circuit
Go to "Fuel Tank
Gauge Check"
OK
v T
Replace Check harness between Replace meter
fuel tank fuel tank gauge and meter and gauge
gauge unit assembly
FUEL INJECTION PULSE CIRCUIT
CHECK
1 Disconnect meter harness connector
(black)
2. Turn ignition switch to "ON"
3 Check for voltage across @$ and 0.
Voimeter SE L669 t
FUEL TANK SUB GAUGE CIRCUIT
CHECK
1 Turn ignition switch to "OFF"
2. Measure resistance between 0 and 0.
Ohmmeter
Ignition switch- OFF
More than ZOQ Less than 4R
SEL670D
EL-50
Page 62 of 116
METER AND GAUGES -Digital Type Combination Gauge
Trouble-shooting (Cont'd)
v
IGo to "Direction Sensor Amplifier Output Check" I
1 NG v
Check for loose harness
connector to
amplifier
Check for loose harness
connector to combmatlon
Replace combinatlon gauge Replace amplifier
I
1 Remove radio and AIC control assembly
from center console Remove combi-
nation gauge with harness connected
2. Turn ignition switch to "ON"
3 Check to determine if voltage IS produced
across
0 and @
SELSBSD
ACCELERATION & MILEAGE METERS
deceleration
Does speedometer operate?
1 No
Check harness between
combination gauge and
speed sensor Replace speed sensor
lNG
Replace combination gauge
Mileage meter registers "0" or abnormal value
I
Does speedometer operate?
Replace speed sensor
Check fuel injection pulse circuit for combination
gauge
I NG v
Check harness between
Replace combination
gauge combination gauge and
E F I control unit
IOK
EL-62