Wiper NISSAN NOTE 2016 Service Repair Manual

FRONT WIPER DRIVE ASSEMBLYWW-67
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
K
M A
B
WW
N
O P
Exploded ViewINFOID:0000000012433249
Disassembly and AssemblyINFOID:0000000012433250
DISASSEMBLY
1. Remove front wiper drive assembly. Refer to WW-66, "Removal and Installation".
2. Remove wiper linkage 1 and 2 from the front wiper drive. CAUTION:
Do not bend the linkage or damage the plastic part of the ball jo int when removing the wiper link-
age.
3. Remove screws and wiper motor from front wiper drive.
ASSEMBLY
1. Install wiper motor screws and wiper motor to front wiper drive.
2. Install wiper linkage 2 to the front wiper drive. CAUTION:
• Do not drop wiper motor or cause it to come into contact with other parts.
• Be careful of the grease condition at the wiper mo tor and wiper linkage joint (retainer). Apply a
suitable multi −purpose grease if necessary.
3. Install wiper linkage 1 to the wiper motor and the front wiper drive.
4. Install front wiper drive assembly. Refer to WW-66, "
Removal and Installation".
1. Wiper linkage 22. Wiper linkage 1 3. Front wiper motor
4. Front wiper drive
ALLIA1311ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

WW-68
< REMOVAL AND INSTALLATION >
WIPER AND WASHER SWITCH
WIPER AND WASHER SWITCH
Removal and InstallationINFOID:0000000012433251
The wiper and washer switch is part of the combination switch. Refer to EXL-107, "Removal and Installation".
Revision: August 2015 2016 Versa Note

cardiagn.com

REAR WIPER ARMWW-69
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
K
M A
B
WW
N
O P
REAR WIPER ARM
Exploded ViewINFOID:0000000012433252
Removal and InstallationINFOID:0000000012433253
REMOVAL
1. Operate the rear wiper to move it to the auto stop position.
2. Remove rear wiper arm cover.
3. Remove nut and rear wiper arm.
INSTALLATION
1. Clean the rear wiper arm as shown. This will reduce the possibil- ity of wiper arm looseness.
2. Adjust the rear wiper blade position. Refer to WW-70, "
Adjustment".
3. Install the rear wiper arm and nut.
4. Install the rear wiper arm cover.
5. Check that the rear wiper blade stops at the specified position. Refer to WW-70, "
Adjustment".
1. Rear wiper motor 2. Rear wiper arm seal3. Rear wiper arm cover
4. Rear wiper arm 5. Rear wiper blade
ALLIA1312ZZ
SKIA0082J
Revision: August 2015 2016 Versa Note

cardiagn.com

WW-70
< REMOVAL AND INSTALLATION >
REAR WIPER ARM
Adjustment
INFOID:0000000012433254
WIPER BLADE POSITION ADJUSTMENT
1. Back door window glass 2. Back door3. Rear wiper blade
A. 30.7 ± 7.5 mm (1.21 ± 0.30 in)
ALLIA1313ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

REAR WIPER BLADEWW-71
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
K
M A
B
WW
N
O P
REAR WIPER BLADE
Removal and InstallationINFOID:0000000012433255
REMOVAL
1. Lift the rear wiper arm and blade assembly away from the back window glass.
2. Push the release tab (A) of the rear wiper blade (1), then move the rear wiper blade down the rear wiper arm (2) to remove.
INSTALLATION
1. Insert the rear wiper blade onto the rear wiper arm until it clicks into place.
JMLIA1044ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

WW-72
< REMOVAL AND INSTALLATION >
REAR WIPER MOTOR
REAR WIPER MOTOR
Exploded ViewINFOID:0000000012433256
Removal and InstallationINFOID:0000000012433257
REMOVAL
1. Remove rear wiper arm. Refer to WW-69, "Removal and Installation".
2. Remove back door inner finisher. Refer to INT-36, "
BACK DOOR INNER FINISHER : Removal and Instal-
lation".
3. Disconnect the harness connector from the rear wiper motor.
4. Remove bolts and rear wiper motor.
INSTALLATION
Installation is in the reverse order of removal.
1. Rear wiper motor 2. Rear wiper arm seal3. Rear wiper arm cover
4. Rear wiper arm 5. Rear wiper blade
ALLIA1312ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com