audio NISSAN NOTE 2016 Service Workshop Manual

AV
AUDIO UNITAV-53
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REMOVAL AND INSTALLATION
AUDIO UNIT
Exploded ViewINFOID:0000000012432889
Removal and InstallationINFOID:0000000012432890
REMOVAL
1. Remove the negative battery cable. Refer to PG-70, "Removal and Installation (Battery)".
2. Remove cluster lid C. Refer to IP-22, "
Removal and Installation".
3. Remove the audio unit screws, then pull out the audio unit.
4. Disconnect the harness connectors from the audio unit and remove.
INSTALLATION
Installation is in the reverse order of removal.
1. Audio unit bracket (LH) 2. Audio unit 3. Audio unit bracket (RH)
AWNIA3121ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-54
< REMOVAL AND INSTALLATION >[BASE AUDIO]
FRONT DOOR SPEAKER
FRONT DOOR SPEAKER
Removal and InstallationINFOID:0000000012432891
REMOVAL
1. Remove the front door finisher. Refer to
INT-15, "Removal and Installation".
2. Remove the front door speaker screws (A).
3. Disconnect the harness connector from front door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3062ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
REAR DOOR SPEAKERAV-55
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REAR DOOR SPEAKER
Removal and InstallationINFOID:0000000012432892
REMOVAL
1. Remove the rear door finisher. Refer to INT-18, "Removal and Installation".
2. Remove the rear door speaker screws (A).
3. Disconnect the harness connector from the rear door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3089ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-56
< REMOVAL AND INSTALLATION >[BASE AUDIO]
BLUETOOTH® CONTROL UNIT
BLUETOOTH® CONTROL UNIT
Removal and InstallationINFOID:0000000012432893
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to
INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the harness connectors fr om the Bluetooth® control unit.
3. Remove the Bluetooth® ant enna screws (A) and the Bluetooth®
antenna (1).
4. Remove the Bluetooth® control unit bracket screws (A) and the Bluetooth® control unit (1).
5. Remove the Bluetooth® control unit screws (A) and separate the Bluetooth® control unit (1) from the bracket (2).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
AWNIA3122ZZ
AWNIA3097ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
BLUETOOTH® ANTENNAAV-57
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
BLUETOOTH® ANTENNA
Removal and Installation INFOID:0000000012432894
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the Bluetooth® antenna harness connec tor from the Bluetooth® control unit.
3. Remove the Bluetooth® antenna screws (A) and the Bluetooth® antenna (1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-58
< REMOVAL AND INSTALLATION >[BASE AUDIO]
STEERING SWITCH
STEERING SWITCH
Removal and InstallationINFOID:0000000012432895
REMOVAL
1. Remove the steering wheel. Refer to ST-8, "Removal and Installation".
2. Remove the steering wheel rear finisher (1) by releasing pawls (A).
3. Remove the steering wheel audio control switch screws (A) from the back of the steering wheel.
4. Remove the steering wheel audio control switches from the steering wheel.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3063ZZ
AWNIA3064ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
MICROPHONEAV-59
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
MICROPHONE
Removal and InstallationINFOID:0000000012432896
REMOVAL
1. Remove the microphone finisher from the headlining by releas- ing pawls (A) using a suitable tool.
2. Disconnect the harness connector from microphone and remove.
3. Separate the microphone from the finisher by releasing pawls (A) using a suitable tool.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
• Make sure to align the rib on the finisher with the slot in the microphone.
• Make sure to install the microphone with the arrows pointing toward the RH side of the vehicle.
AWNIA3153ZZ
AWNIA3154ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-60
< REMOVAL AND INSTALLATION >[BASE AUDIO]
ROD ANTENNA
ROD ANTENNA
Exploded ViewINFOID:0000000012432897
Removal and InstallationINFOID:0000000012432898
REMOVAL
1. Lower the rear portion of the headlining. Refer to
INT-31, "Removal and Installation".
2. Disconnect the harness connectors from t he antenna (satellite radio model shown).
3. Remove the antenna nut (A) and remove the antenna.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
If the antenna nut is tightened less than the specified torque this will lower the sensitivity of the
antenna. If the antenna nut is tightened more than the specified torque this will deform the roof panel.
AWNIA3124ZZ
1. Antenna rod 2. Antenna base A. Antenna nut
AWNIA3115ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
ANTENNA FEEDERAV-61
< REMOVAL AND INSTALLATION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
ANTENNA FEEDER
Feeder LayoutINFOID:0000000012432899
1. Antenna base (antenna amp.) 2. Rod Antenna 3. M351
4. M67, M350 5. M107
AWNIA3114ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-62
< PRECAUTION >[DISPLAY AUDIO]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint Syst
em (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000012432945
The Supplemental Restraint System such as “A IR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Service Manual.
WARNING:
• To avoid rendering the SRS inopera tive, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including in correct removal and installation of the SRS, can lead to personal
injury caused by unintent ional activation of the system. For re moval of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipmen t on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harn esses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electri c power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor( s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers , always switch the Ignition OFF, disconnect the
battery and wait at least three minutes before performing any service.
Precaution for Trouble DiagnosisINFOID:0000000012432946
AV COMMUNICATION SYSTEM
• Do not apply voltage of 7.0 V or higher to the measurement terminals.
• Use the tester with its open terminal voltage being 7.0 V or less.
• Be sure to turn ignition switch OFF and disconnect the battery cable from\
the negative terminal before checking the circuit.
Precaution for Harness RepairINFOID:0000000012432947
AV COMMUNICATION SYSTEM
• Solder the repaired parts, and wrap with tape. [Frays of twisted line
must be within 110 mm (4.33 in).]
PKIA0306E
Revision: August 2015 2016 Versa Note

cardiagn.com