audio NISSAN NOTE 2016 Service Owner's Guide

AV
DIAGNOSIS AND REPAIR WORKFLOWAV-33
< BASIC INSPECTION > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work FlowINFOID:0000000012432878
OVERALL SEQUENCE
DETAILED FLOW
1.GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about t he symptom (the condition and the environment when the
incident/malfunction occurred).
>> GO TO 2.
2.CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition
when the symptom is detected. Refer to AV-48, "
Symptom Table".
>> GO TO 3.
3.DETECT MALFUNCTIONING PA RT BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
AWNIA2404GB
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-34
< BASIC INSPECTION >[BASE AUDIO]
DIAGNOSIS AND REPAIR WORKFLOW
Is malfunctioning part detected?
YES >> GO TO 4.
NO >> GO TO 2.
4.REPAIR OR REPLACE THE MALFUNCTIONING PART
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors di sconnected during Diagnostic Procedure.
>> GO TO 5.
5.FINAL CHECK
Refer to confirmed symptom in step 2, and ma ke sure that the symptom is not detected.
Was the repair confirmed?
YES >> Inspection End.
NO >> GO TO 2.
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
POWER SUPPLY AND GROUND CIRCUITAV-35
< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
AUDIO UNIT
AUDIO UNIT : Diagnosis ProcedureINFOID:0000000012432879
Regarding Wiring Diagram information, refer to AV-24, "Wiring Diagram".
1.CHECK FUSE
Check that the following fuses are not blown.
Are the fuses blown?
YES >> Replace the blown fuse after repairing the affected circuit.
NO >> GO TO 2.
2.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect audio unit connector M43.
3. Check voltage between audio unit connector M43 and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connectors.
3.CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect audio unit connector M101.
3. Check continuity between audio unit connector M101 and ground.
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair or replace harness or connectors.
BLUETOOTH® CONTROL UNIT
BLUETOOTH® CONTROL UNI T : Diagnosis ProcedureINFOID:0000000012432880
Regarding Wiring Diagram information, refer to AV-24, "Wiring Diagram".
Terminal No.Signal name Fuse No.
7 ACC power supply 18 (10A)
19 Battery power supply 29 (15A)
Audio unit
GroundCondition Vo l ta g e
(Approx.)
Connector Terminal
M43 7
—Ignition switch: ON
Battery voltage
19 Ignition switch: OFF
Audio unit
GroundContinuity
Connector Terminal
M101 22
—Y es
24
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-36
< DTC/CIRCUIT DIAGNOSIS >[BASE AUDIO]
POWER SUPPLY AND GROUND CIRCUIT
1.CHECK FUSE
Check that the following fuses are not blown.
Are the fuses blown?
YES >> Replace the blown fuse after repairing the affected circuit.
NO >> GO TO 2.
2.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect Bluetooth
® control unit connector B33.
3. Check voltage between Bluetooth
® control unit connector B33 and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connectors.
3.CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between Bluetooth
® control unit connector B33 and ground.
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair or replace harness or connectors.
Terminal No. Signal name Fuse No.
1 Battery power supply 29 (15A)
2 ACC power supply 17 (10A)
3 Ignition signal 5 (10A)
Bluetooth® control unit
GroundCondition Voltag e
(Approx.)
Connector Terminal
B33 1
—Ignition switch: OFF
Battery voltage
2 Ignition switch: ACC
3 Ignition switch: ON
Bluetooth® control unit
Ground Continuity
Connector Terminal
B33 4
—Y es
21
22
24
27
Revision: August 2015
2016 Versa Note

cardiagn.com

AV
FRONT DOOR SPEAKERAV-37
< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
FRONT DOOR SPEAKER
Diagnosis ProcedureINFOID:0000000012432881
Regarding Wiring Diagram information, refer to AV-24, "Wiring Diagram".
1.CONNECTOR CHECK
Check the audio unit and speaker connectors for the following:
• Proper connection
• Damage
• Disconnected or loose terminals
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair the terminals or connectors.
2.CHECK FRONT DOOR SPEAKER SIGNAL CIRCUIT CONTINUITY
1. Disconnect audio unit connector M43 and suspect front door speaker connector.
2. Check continuity between audio unit connector M43 and suspect front door speaker connector.
3. Check continuity between audio unit connector M43 and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connectors.
3.CHECK FRONT DOOR SPEAKER SIGNAL
1. Connect audio unit connector M43 and suspect front door speaker connector.
2. Turn ignition switch to ACC.
3. Push audio unit POWER switch.
4. Check signal between the terminals of audio unit connector M43.
Audio unit Front door speaker
Continuity
Connector TerminalConnector Terminal
M43 2
D12 (LH) 1
Ye s
32
11 D112 (RH) 1
12 2
Audio unit
GroundContinuity
Connector Terminal
M43 2
—N o
3
11
12
Audio unit connector M43 ConditionReference value
(+) (− )
Terminal Terminal
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-38
< DTC/CIRCUIT DIAGNOSIS >[BASE AUDIO]
FRONT DOOR SPEAKER
Is the inspection result normal?
YES >> Replace front door speaker. Refer to
AV-54, "Removal and Installation".
NO >> Replace audio unit. Refer to AV-53, "
Removal and Installation".
23
Audio signal output
11 1 2
SKIB3609E
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
REAR DOOR SPEAKERAV-39
< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REAR DOOR SPEAKER
Diagnosis ProcedureINFOID:0000000012432882
Regarding Wiring Diagram information, refer to AV-24, "Wiring Diagram".
1.CONNECTOR CHECK
Check the audio unit and speaker connectors for the following:
• Proper connection
• Damage
• Disconnected or loose terminals
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair the terminals or connectors.
2.CHECK REAR SPEAKER SIGNAL CIRCUIT CONTINUITY
1. Disconnect audio unit connector M43 and suspect rear door speaker connector.
2. Check continuity between audio unit connector M43 and suspect rear door speaker connector.
3. Check continuity between audio unit connector M43 and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connectors.
3.CHECK REAR SPEAKER SIGNAL
1. Connect audio unit connector M43 and suspect rear door speaker connector.
2. Turn ignition switch to ACC.
3. Push audio unit POWER switch.
4. Check signal between the terminals of audio unit connector M43.
Audio unit Rear door speaker
Continuity
Connector TerminalConnector Terminal
M43 4
D207 (LH) 1
Ye s
52
13 D307 (RH) 1
14 2
Audio unit
GroundContinuity
Connector Terminal
M43 4
—N o
5
13
14
Audio unit connector M43 ConditionReference value
(+) (− )
Terminal Terminal
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-40
< DTC/CIRCUIT DIAGNOSIS >[BASE AUDIO]
REAR DOOR SPEAKER
Is the inspection result normal?
YES >> Replace rear door speaker. Refer to
AV-55, "Removal and Installation".
NO >> Replace audio unit. Refer to AV-53, "
Removal and Installation".
45
Audio signal output
13 14
SKIB3609E
Revision: August 2015 2016 Versa Note

cardiagn.com

AV
BLUETOOTH® VOICE SIGNAL CIRCUITAV-41
< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
BLUETOOTH® VOICE SIGNAL CIRCUIT
Diagnosis ProcedureINFOID:0000000012432883
Regarding Wiring Diagram information, refer to AV-24, "Wiring Diagram".
1.CHECK BLUETOOTH® VOICE SIGNAL CIRCUIT CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect audio unit connector M101 and Bluetooth
® control unit connector B33.
3. Check continuity between audio unit connector M101 and Bluetooth
® control unit connector B33.
4. Check continuity between audio unit connector M101 and ground.
Is inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace harness or connectors.
2.CHECK BLUETOOTH® VOICE SIGNAL GROUND CIRCUIT CONTINUITY
Check continuity between audio unit connector M101 and Bluetooth
® control unit connector B33.
Is inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace harness or connectors.
3.CHECK BLUETOOTH® VOICE SIGNAL
1. Connect audio unit connector M101 and Bluetooth
® control unit connector B33.
2. Turn ignition switch to ACC.
3. Press switch.
4. Check signal between the terminals of audio unit connector M101.
Audio unit Bluetooth® control unit
Continuity
Connector TerminalConnector Terminal
M101 32B33 9Yes
Audio unit
Ground Continuity
Connector Terminal
M101 32—No
Audio unit
Bluetooth® control unit
Continuity
Connector TerminalConnector Terminal
M101 31B33 10Yes
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-42
< DTC/CIRCUIT DIAGNOSIS >[BASE AUDIO]
BLUETOOTH® VOICE SIGNAL CIRCUIT
Is the inspection result normal?
YES >> Replace audio unit. Refer to AV-53, "Removal and Installation".
NO >> Replace Bluetooth® control unit. Refer to AV-56, "Removal and Installation".
Audio unit connector M101
ConditionReference value
(+) (− )
Terminal Terminal
32 31During voice guide output with
switch pressed.
SKIB3609E
Revision: August 2015 2016 Versa Note

cardiagn.com