audio unit NISSAN TEANA 2008 User Guide

AV-16
< FUNCTION DIAGNOSIS >[AUDIO SYSTEM]
DIAGNOSIS SYSTEM (AUDIO UNIT)
4. The diagnosis default screen of audio display unit is displayed.
NOTE:
Diagnosis default screen = All icons and segments of the audio display unit are turned on.
5. Turning the TUNE/FOLDER dial clockwise displays the channel check mode. Pressing and holding the
AUDIO switch during each channel check or waiting approximately 1 second after finishing all channel
checks returns to the diagnosis default screen.
Channel check item
6. Self-diagnosis mode is canceled when the ignition switch is turned OFF.
KEY CHECK DIAGNOSIS FUNCTION
1. Turn ignition switch ON.
2. Turn the audio unit off.
3. While pressing the “1” button, turn the volume control dial clock-
wise or counterclockwise for 30 clicks or more.
4. The diagnosis default screen of audio display unit is displayed.
NOTE:
Diagnosis default screen = All icons and segments of the audio display unit are turned on.
5. Turning the TUNE/FOLDER dial counterclockwise displays the key check mode, and the pressed switch
name is shown. Pressing and holding the AUDIO switch during the key check returns to the diagnosis
default screen.
Mode Description
Channel checkChannel Check
Front Left
Connection of a speaker can be confirmed by test tone. Channel Check
Rear Left
Channel Check
Rear Right
Channel Check
Front Right
JSNIA1334GB

AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-17
< FUNCTION DIAGNOSIS >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
Key check item (audio)
Key check item (steering switch)
6. Self-diagnosis mode is canceled when the ignition switch is turned OFF.
AV COMMUNICATION DIAGNOSIS FUNCTION
1. Turn ignition switch ON.
2. Turn the audio unit off.
3. While pressing the “6” button, turn the volume control dial clock-
wise or counterclockwise for 30 clicks or more.
4. Returns to diagnosis default screen and displays “AV DIAGNOSIS”.
Mode Display item Switch name
Key checkEJECT “EJECT” switch
LOAD “LOAD” switch
POWER “ON·OFF” switch
VOLUME up “VOL up” switch
VOLUME down “VOL down” switch
1 Preset button “1” switch
2 Preset button “2” switch
3 Preset button “3” switch
4 Preset button “4” switch
5 Preset button “5” switch
6 Preset button “6” switch
AM·FM “AM·FM” switch
DISC “DISC” switch
AUX “AUX” switch
AUDIO “AUDIO” switch
TUNE/FOLDER up “TUNE/FOLDER up” switch
TUNE/FOLDER down “TUNE/FOLDER up” switch
DISP CLOCK “DISP CLOCK” switch
AUTO.P “AUTO.P”” switch
SCAN/RPT “SCAN RPT” switch
SEEK/TRACK down “SEEK” switch
SEEK/TRACK up “TRACK” switch
Mode Display item Switch name
Key checkSTR SOURCE “SOURCE” switch
STR VOL UP “VOL up” switch
STR VOL DOWN “VOL down” switch
STR UP “SEEK up” switch
STR DOWN “SEEK down” switch
JSNIA1335GB

AV-18
< FUNCTION DIAGNOSIS >[AUDIO SYSTEM]
DIAGNOSIS SYSTEM (AUDIO UNIT)
5. Pressing the AUDIO switch briefly displays the AV communication diagnosis mode. Pressing the AUDIO
switch briefly again switches to each AV communication display.
AV communication diagnosis item
6. Pressing the TRACK switch displays the confirmation screen of “delete error record”. Press the SEEK
switch if returning from RECORD DEL YES? to RECORD DEL NO?
The item is automatically determined approximately 6 seconds after it is displayed. Then the display
returns to AV TROUBLE DEL display item.
7. Self-diagnosis mode is canceled when the ignition switch is turned OFF.
Display item
Description
AV communication item Current Past
TRANSMIT OK / UN OK / 0 –39The communication condition and error counter from the audio unit to
the audio display unit are displayed.
DISP OK / UN OK / 0 –39
The communication condition and error counter from the audio display
unit to the audio unit.
DISP MPDT OK / UN OK / 0 –39
NO HISTORY BTHF — — Not used.
AV TROUBLE DEL — — The error record can be deleted.
Display item Description
RECORD DEL NO? Does not delete error record.
RECORD DEL YES? Deletes error record.

AV
POWER SUPPLY AND GROUND CIRCUIT
AV-19
< COMPONENT DIAGNOSIS >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
COMPONENT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
AUDIO UNIT
AUDIO UNIT : Diagnosis ProcedureINFOID:0000000003765593
1.CHECK FUSE
Check for blown fuses.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Be sure to eliminate the cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUIT
Check voltage between audio unit harness connectors and ground.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Check harness between audio unit and fuse.
Power source Fuse No.
Battery 31
Ignition switch ACC or ON 19
Signal name Connector No. Terminal No. Ignition switch position Value (Approx.)
Battery power supply
M4619 OFF
Battery voltage
ACC power supply 7 ACC

AV-20
< COMPONENT DIAGNOSIS >[AUDIO SYSTEM]
STEERING SWITCH SIGNAL A CIRCUIT
STEERING SWITCH SIGNAL A CIRCUIT
DescriptionINFOID:0000000003765594
Transmits the steering switch signal to audio unit.
Diagnosis ProcedureINFOID:0000000003765595
1.CHECK STEERING SWITCH SIGNAL A CIRCUIT
1. Disconnect audio unit connector and spiral cable connector.
2. Check continuity between audio unit harness connector and spiral cable harness connector.
3. Check continuity between audio unit harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK SPIRAL CABLE
Check spiral cable.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Replace spiral cable.
3.CHECK AUDIO UNIT VOLTAGE
1. Connect audio unit connector and spiral cable connector.
2. Turn ignition switch ON.
3. Check voltage between audio unit harness connector terminals.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace audio unit.
4.CHECK STEERING SWITCH
1. Turn ignition switch OFF.
2. Check steering switch. Refer to AV-21, "
Component Inspection".
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace steering switch.
Audio unit Spiral cable
Continuity
Connector Terminal Connector Terminal
M46 6 M33 24 Existed
Audio unit
—Continuity
Connector Terminal
M46 6 Ground Not existed
(+) (−)
Vo l ta g e Audio unit
Connector Terminal Connector Terminal
M46 6 M46 15 Approx. 5.0 V

AV-22
< COMPONENT DIAGNOSIS >[AUDIO SYSTEM]
STEERING SWITCH SIGNAL B CIRCUIT
STEERING SWITCH SIGNAL B CIRCUIT
DescriptionINFOID:0000000003765597
Transmits the steering switch signal to audio unit.
Diagnosis ProcedureINFOID:0000000003765598
1.CHECK STEERING SWITCH SIGNAL B CIRCUIT
1. Disconnect audio unit connector and spiral cable connector.
2. Check continuity between audio unit harness connector and spiral cable harness connector.
3. Check continuity between audio unit harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK SPIRAL CABLE
Check spiral cable.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Replace spiral cable.
3.CHECK AUDIO UNIT VOLTAGE
1. Connect audio unit connector and spiral cable connector.
2. Turn ignition switch ON.
3. Check voltage between audio unit harness connector terminals.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace audio unit.
4.CHECK STEERING SWITCH
1. Turn ignition switch OFF.
2. Check steering switch. Refer to AV-23, "
Component Inspection".
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace steering switch.
Audio unit Spiral cable
Continuity
Connector Terminal Connector Terminal
M46 16 M33 31 Existed
Audio unit
—Continuity
Connector Terminal
M46 16 Ground Not existed
(+) (−)
Vo l ta g e Audio unit
Connector Terminal Connector Terminal
M46 16 M46 15 Approx. 5.0 V

AV-24
< COMPONENT DIAGNOSIS >[AUDIO SYSTEM]
STEERING SWITCH SIGNAL GND CIRCUIT
STEERING SWITCH SIGNAL GND CIRCUIT
DescriptionINFOID:0000000003765600
Transmits the steering switch signal to audio unit.
Diagnosis ProcedureINFOID:0000000003765601
1.CHECK STEERING SWITCH SIGNAL GND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect audio unit connector and spiral cable connector.
3. Check continuity between audio unit harness connector and spiral cable harness connector.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK SPIRAL CABLE
Check spiral cable.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Replace spiral cable.
3.CHECK GROUND CIRCUIT
1. Connect audio unit connector.
2. Check continuity between audio unit harness connector and ground.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace audio unit.
4.CHECK STEERING SWITCH
1. Turn ignition switch OFF.
2. Check steering switch. Refer to AV-25, "
Component Inspection".
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace steering switch.
Audio unit Spiral cable
Continuity
Connector Terminal Connector Terminal
M46 15 M33 33 Existed
Audio unit
—Continuity
Connector Terminal
M46 15 Ground Existed

AV-26
< ECU DIAGNOSIS >[AUDIO SYSTEM]
AUDIO UNIT
ECU DIAGNOSIS
AUDIO UNIT
Reference ValuesINFOID:0000000003765603
TERMINAL LAYOUT
PHYSICAL VALUES
JSNIA1428ZZ
Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
2
(W)3
(B)Sound signal front LH OutputIgnition
switch
ONSound output.
4
(O/B)5
(W/R)Sound signal rear LH OutputIgnition
switch
ONSound output.
6
(W/G)15
(L/B)Steering switch signal A InputIgnition
switch
ONKeep pressing SOURCE
switch. 0 V
Keep pressing switch.1.0 V
Keep pressing switch.2.0 V
Except for above. 5.0 V
7
(V/W)Ground ACC power supply InputIgnition
switch
ACC— Battery voltage
11
(B/W)12
(BR)Sound signal front RH OutputIgnition
switch
ONSound output.
SKIB3609E
SKIB3609E
SKIB3609E

AV
AUDIO UNIT
AV-27
< ECU DIAGNOSIS >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P13
(L)14
(B/W)Sound signal rear RH OutputIgnition
switch
ONSound output.
15
(L/B)GroundSteering switch signal
ground—Ignition
switch
ON—0 V
16
(GR/L)15
(L/B)Steering switch signal B InputIgnition
switch
ONKeep pressing VOL DOWN
switch.0 V
Keep pressing VOL UP
switch.1.0 V
Except for above. 5.0 V
19
(Y)Ground Battery power supply InputIgnition
switch
OFF— Battery voltage
21
(R)GroundAV communication signal
(L)Input/
Output—— —
22
(L)GroundAV communication signal
(H)Input/
Output—— —
33 — FM sub Input — — —
34 — AM-FM main Input — — —
35 Ground Antenna amp. ON signal OutputIgnition
switch
ACC—12.0 V Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E

AV-28
< ECU DIAGNOSIS >[AUDIO SYSTEM]
AUDIO UNIT
Wiring Diagram — BASE AUDIO —
INFOID:0000000003765604
JCNWM0876GB