torque NISSAN TEANA 2008 Service Manual

TM-288
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
6
Slips/Will
Not EngageDoes not lock-up.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
8. Step motorTM-261
9. PNP switchTM-213
10. Lock-up select solenoid valveTM-258
11. CVT fluid temperature sensorTM-216
12. Secondary speed sensorTM-222
13. Secondary pressure sensorTM-242
OFF vehicle14. Torque converterTM-33515. Oil pump assembly
TM-332
16. Control valve
7Does not hold lock-up
condition.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
8. Step motorTM-261
9. PNP switchTM-213
10. Lock-up select solenoid valveTM-258
11. CVT fluid temperature sensorTM-216
12. Secondary speed sensorTM-222
13. Secondary pressure sensorTM-242
OFF vehicle14. Torque converterTM-33515. Oil pump assembly
TM-332
16. Control valve No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-289
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
8
Slips/Will
Not EngageLock-up is not re-
leased.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
OFF vehicle8. Torque converterTM-3359. Oil pump assembly
TM-332
10. Control valve
9With selector lever in
“D” position, accelera-
tion is extremely poor.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Stall testTM-306
4. Accelerator pedal position sensorTM-252
5. CAN communication lineTM-208
6. PNP switchTM-213
7. CVT positionTM-314
8. Step motorTM-261
9. Primary speed sensorTM-218
10. Secondary speed sensorTM-222
11. Accelerator pedal position sensorTM-252
12. Secondary pressure sensorTM-242
13. CVT fluid temperature sensorTM-216
14. Power supplyTM-249
OFF vehicle15. Torque converterTM-33516. Oil pump assembly
TM-332
17. Forward clutch
18. Control valve No
.Item Symptom Condition Diagnostic Item Reference

TM-290
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
10
Slips/Will
Not EngageWith selector lever in
“R” position, accelera-
tion is extremely poor.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Stall testTM-306
4. Accelerator pedal position sensorTM-252
5. CAN communication lineTM-208
6. PNP switchTM-213
7. CVT positionTM-314
8. Step motorTM-261
9. Primary speed sensorTM-218
10. Secondary speed sensorTM-222
11. Accelerator pedal position sensorTM-252
12. Secondary pressure sensorTM-242
13. CVT fluid temperature sensorTM-216
14. Power supplyTM-249
OFF vehicle15. Torque converterTM-33516. Oil pump assembly
TM-332
17. Reverse brake
18. Control valve
11 S l i p s a t l o c k - u p .ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
8. Step motorTM-261
9. PNP switchTM-213
10. Lock-up select solenoid valveTM-258
11. CVT fluid temperature sensorTM-216
12. Secondary speed sensorTM-222
13. Secondary pressure sensorTM-242
OFF vehicle14. Torque converterTM-33515. Oil pump assembly
TM-332
16. Control valve No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-291
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
12
OthersNo creep at all.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Accelerator pedal position sensorTM-252
4. PNP switchTM-213
5. CAN communication lineTM-208
6. Stall testTM-306
7. CVT positionTM-314
8. Step motorTM-261
9. Primary speed sensorTM-218
10. Secondary speed sensorTM-222
11. Accelerator pedal position sensorTM-252
12. CVT fluid temperature sensorTM-216
13. Secondary pressure sensorTM-242
14. Power supplyTM-249
OFF vehicle15. Torque converterTM-335
16. Oil pump assembly
TM-332
17. Gear system
18. Forward clutch
19. Reverse brake
20. Control valve
13Vehicle cannot run in
all positions.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. PNP switchTM-213
4. Stall testTM-306
5. CVT positionTM-314
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Accelerator pedal position sensorTM-252
10. CVT fluid temperature sensorTM-216
11. Secondary pressure sensorTM-242
12. Power supplyTM-249
OFF vehicle13. Torque converterTM-335
14. Oil pump assembly
TM-332
15. Gear system
16. Forward clutch
17. Reverse brake
18. Control valve
19. Parking components No
.Item Symptom Condition Diagnostic Item Reference

TM-292
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
14
OthersWith selector lever in
“D” position, driving is
not possible.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. PNP switchTM-213
4. Stall testTM-306
5. CVT positionTM-314
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Accelerator pedal position sensorTM-252
10. CVT fluid temperature sensorTM-216
11. Secondary pressure sensorTM-242
12. Power supplyTM-249
OFF vehicle13. Torque converterTM-335
14. Oil pump assembly
TM-332
15. Gear system
16. Forward clutch
17. Control valve
18. Parking components
15With selector lever in
“R” position, driving is
not possible.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. PNP switchTM-213
4. Stall testTM-306
5. CVT positionTM-314
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Accelerator pedal position sensorTM-252
10. CVT fluid temperature sensorTM-216
11. Secondary pressure sensorTM-242
12. Power supplyTM-249
OFF vehicle13. Torque converterTM-335
14. Oil pump assembly
TM-332
15. Gear system
16. Reverse brake
17. Control valve
18. Parking components No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-293
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
16
OthersJudder occurs during
lock-up.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. Primary speed sensorTM-218
4. Secondary speed sensorTM-222
5. Accelerator pedal position sensorTM-252
6. CAN communication lineTM-208
7. Torque converter clutch solenoid valveTM-230
OFF vehicle8. Torque converterTM-3359. Control valveTM-332
17Strange noise in “D”
position.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. CAN communication lineTM-208
OFF vehicle4. Torque converterTM-335
5. Oil pump assembly
TM-332
6. Gear system
7. Forward clutch
8. Control valve
9. Bearing
18Strange noise in “R”
position.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. CAN communication lineTM-208
OFF vehicle4. Torque converterTM-335
5. Oil pump assembly
TM-332
6. Gear system
7. Reverse brake
8. Control valve
19Strange noise in “N”
position.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. CAN communication lineTM-208
OFF vehicle4. Torque converterTM-3355. Oil pump assembly
TM-332
6. Gear system
7. Control valve No
.Item Symptom Condition Diagnostic Item Reference

TM-294
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
20
OthersVehicle does not de-
celerate by engine
brake.ON vehicle1. CVT fluid level and stateTM-304
2. CVT positionTM-314
3. CAN communication lineTM-208
4. Step motorTM-261
5. Primary speed sensorTM-218
6. Secondary speed sensorTM-222
7. Line pressure testTM-308
8. Engine speed signalTM-226
9. Accelerator pedal position sensorTM-252
OFF vehicle 10. Control valveTM-332
21 Maximum speed low.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Accelerator pedal position sensorTM-252
4. CAN communication lineTM-208
5. Stall testTM-306
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Secondary pressure sensorTM-242
10. CVT fluid temperature sensorTM-216
OFF vehicle11. Torque converterTM-335
12. Oil pump assembly
TM-332
13. Gear system
14. Forward clutch
15. Control valve
22With selector lever in
“P” position, vehicle
does not enter park-
ing condition or, with
selector lever in an-
other position, park-
ing condition is not
cancelled.ON vehicle1. PNP switchTM-213
2. CVT positionTM-314
OFF vehicle 3. Parking componentsTM-332
23Vehicle runs with CVT
in “P” position.ON vehicle1. PNP switchTM-213
2. CVT fluid level and stateTM-304
3. CVT positionTM-314
OFF vehicle4. Parking components
TM-3325. Gear system
6. Control valve No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-295
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
24
OthersVehicle runs with CVT
in “N” position.ON vehicle1. PNP switchTM-213
2. CVT fluid level and stateTM-304
3. CVT positionTM-314
OFF vehicle4. Gear system
TM-3325. Forward clutch
6. Reverse brake
7. Control valve
25 Engine stall.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. Primary speed sensorTM-218
4. Torque converter clutch solenoid valveTM-230
5. CAN communication lineTM-208
6. Stall testTM-306
7. Secondary pressure sensorTM-242
OFF vehicle8. Torque converterTM-3359. Control valveTM-332
26Engine stalls when
selector lever is shift-
ed “N”→“D” or “R”.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. Primary speed sensorTM-218
4. Torque converter clutch solenoid valveTM-230
5. CAN communication lineTM-208
6. Stall testTM-306
OFF vehicle7. Torque converterTM-3358. Control valveTM-332
27Engine speed does
not return to idle.ON vehicle1. CVT fluid level and stateTM-304
2. Accelerator pedal position sensorTM-252
3. Secondary speed sensorTM-222
4. CAN communication lineTM-208
OFF vehicle 5. Control valveTM-332
28 CVT does not shift.ON vehicle1. CVT fluid level and stateTM-304
2. CVT positionTM-314
3. Line pressure testTM-308
4. Engine speed signalTM-226
5. Accelerator pedal position sensorTM-252
6. CAN communication lineTM-208
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Step motorTM-261
OFF vehicle10. Control valve
TM-33211. Oil pump assembly
29Engine does not start
in “N” or “P” position.ON vehicle1. Ignition switch and starterPG-55
,
STR-10
2. CVT positionTM-314
3. PNP switchTM-213
No
.Item Symptom Condition Diagnostic Item Reference

TM-306
< ON-VEHICLE MAINTENANCE >[CVT: RE0F10A]
STALL TEST
STALL TEST
Inspection and JudgmentINFOID:0000000003806506
INSPECTION
1. Inspect the amount of engine oil. Replenish the engine oil if necessary.
2. Drive for about 10 minutes to warm up the vehicle so that the
CVT fluid temperature is 50 to 80°C (122 to 176°F). Inspect the
amount of CVT fluid. Replenish if necessary.
3. Securely engage the parking brake so that the tires do not turn.
4. Install a tachometer where it can be seen by driver during test.
NOTE:
It is good practice to mark the point of specified engine rpm on
indicator.
5. Start engine, apply foot brake, and place selector lever in “D”
position.
6. While holding down the foot brake, gradually press down the
accelerator pedal.
7. Quickly read off the stall speed, and then quickly remove your
foot from the accelerator pedal.
CAUTION:
Never hold down the accelerator pedal for more than 5 sec-
onds during this test.
8. Move the selector lever to the “N” position.
9. Cool down the CVT fluid.
CAUTION:
Run the engine at idle for at least 1 minute.
10. Repeat steps 6 through 9 with selector lever in “R” position.
JUDGMENT
SAT647B
SCIA7463E
Stall speed : Refer to TM-337, "Stall Speed".
SAT514G
Selector lever position
Expected problem location
“D” “R”
Stall rotation HOForward clutch
O H  Reverse brake
L L  Engine and torque converter one-way clutch
HH Line pressure low
 Primary pulley
 Secondary pulley
 Steel belt

TM-308
< ON-VEHICLE MAINTENANCE >[CVT: RE0F10A]
LINE PRESSURE TEST
LINE PRESSURE TEST
Inspection and JudgmentINFOID:0000000003806507
INSPECTION
Line Pressure Test Procedure
1. Inspect the amount of engine oil and replenish if necessary.
2. Drive the car for about 10 minutes to warm it up so that the CVT fluid reaches in the range of 50 to 80°C
(122 to 176°F), then inspect the amount of CVT fluid and replenish if necessary.
NOTE:
The CVT fluid temperature rises in the range of 50 to 80°C (122 to 176°F) during 10 minutes of driv-
ing.
3. After warming up CVT, remove the oil pressure detection plug
and install the joint pipe adapter (SST: KV31103600), adapter
(SST: 25055000), oil pressure gauge set (commercial service
tool).
CAUTION:
When using the oil pressure gauge, be sure to use the O-
ring attached to the oil pressure detection plug.
4. Securely engage the parking brake so that the tires do not turn.
5. Start the engine, and then measure the line pressure at both idle
and the stall speed.
CAUTION:
 Keep the brake pedal pressed all the way down during
measurement.
 When measuring the line pressure at the stall speed, refer
to TM-306, "
Inspection and Judgment".
6. After the measurements are complete, install the oil pressure
detection plug and tighten to the specified torque below.
CAUTION:
 Never reuse O-ring.
 Apply CVT fluid to O-ring.
JUDGMENT
JPDIA0739GB
SCIA7463E
Line pressure : Refer to TM-337, "Line Pressure".
: 7.5 N·m (0.77 kg-m, 66 in-lb)
SAT493G