center console NISSAN TEANA 2008 Repair Manual

IP-12
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
Removal and Installation
INFOID:0000000003816778
WORK STEP
When removing instrument panel assembly, combination meter, instrument finisher A, instrument finisher B,
AV C/U (audio unit) or center console assembly take steps in the order shown by the number below.
1. Optical sensor 2. Center speaker grille 3. Sunload sensor
4. Speaker grille LH 5. Front squawker LH 6. Instrument side finisher LH
7. Side ventilator grille LH 8. Combination meter 9. Cluster lid A
10. Instrument lower panel LH 11. Fuse block lid 12. Instrument finisher A
13. Steering column upper cover 14. Steering column lower cover 15. Instrument finisher D
16. Instrument finisher E 17. Glove box lid 18. Glove box assembly
19. Glove box damper 20. Illumination lamp 21. Front passenger air bag module
22. Side ventilator grille RH 23. Instrument side finisher RH 24. Instrument panel assembly
25. Front squawker RH 26. Speaker grille RH 27. Center speaker
28. Display unit 29. Cluster lid D 30. Cluster lid upper finisher
31. AV C/U (audio unit) 32. Instrument finisher B 33. Push button ignition switch
34. Cluster lid C 35. Cluster lid lower finisher 36. Socket and bulb
37. DVD player 38. Instrument side panel RH 39. Glove box mask
Refer to GI-4, "
Components" for symbols in the figure.
PA R T SINSTRUMENT
PA N E L
ASSEMBLYCOMBINATION
METERINSTRUMENT
FINISHER AINSTRUMENT
FINISHER BAV C / U
(audio unit)CENTER
CONSOLE
ASSEMBLY
Instrument finisher D [1] [1] [1] [1]
Instrument finisher E [2] [2] [2]
Front body side welt LH [3] [2] [1] [1] [3]
Front pillar garnish LH [4]
Speaker grille LH [5]
Front squawker LH [6]
Instrument side finisher LH [7] [3] [2] [2] [4]
Fuse block lid [8] [4] [3] [3] [5]
Instrument lower panel LH [9] [5] [4] [4] [6]
Instrument lower cover LH [10][7]
Front body side welt RH [11] [5] [8]
Front pillar garnish RH [12]
Speaker grille RH [13]
Front squawker RH [14]
Instrument side finisher RH [15] [6] [9]
Glove box assembly [16] [7] [10]
DVD player [17]
Instrument side panel RH [18] [8] [11]
Instrument lower cover RH [19][12]
Selector lever knob [20][13]
Console switch panel [21][14]
Console finisher assembly [22][15]
Position indicator plate [23][16]
Console rear finisher [24][17]
Center console assembly [25][18]

INSTRUMENT PANEL ASSEMBLY
IP-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
MA
B
IP
N
O
P
24. Remove console switch panel.
 Disengage pawls of console switch panel (1) with remover tool
(A).
 Pull up console switch panel.
25. Remove console finisher assembly.
 Put selector lever in the [N] position.
 Remove console finisher assembly (1) fixing metal clips and
pawls sequentially from the front side with remover tool.
 Pull console finisher assembly, upward to disengage from cen-
ter console.
 Disconnect harness connectors.
26. Remove control device upper case.
 Put selector lever in the [P] position.
 Remove control device upper case (1) mounting screws (A).
 Pull control device upper case, upward to disengage from con-
trol device assembly.
 Disconnect harness clip (B).
27. Remove console rear finisher.
 Pull back console rear finisher (1) by using a remover tool (A),
then disengage pawls and metal clips.
 Disconnect inside key antenna connector.
28. Remove center console assembly.
 Remove center console fixing screws (A).
: Pawl
JMJIA1904ZZ
: Pawl
: Metal clip
JMJIA1905ZZ
JMJIA1906ZZ
: Pawl
: Metal clip
JMJIA1907ZZ
JMJIA1908ZZ

IP-18
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
 Put front seat to the front most position.
 Remove center console fixing screws (B).
 Put front seat to the rear most position.
 Lift up center console assembly back side.
 Disconnect harness connectors.
29. Remove steering wheel assembly. Refer to ST-12, "
Removal and Installation".
30. Remove steering column covers.
 Remove steering column cover fixing screws (A).
 Pull up steering column upper cover (1), and then remove
steering column upper cover.
 Pull down steering column lower cover (2), and then remove
steering column lower cover.
31. Remove combination switch. Refer to BCS-79, "
Removal and Installation".
32. Remove spiral cable. Refer to SR-9, "
Removal and Installation".
33. Remove instrument finisher A.
Pull back instrument finisher A (1), and disengage metal clips.
34. Remove cluster lid A.
 Disconnect meter control switch harness connector (A).
JMJIA1909ZZ
: Pawl
JMJIA1910ZZ
: Metal clip
JMJIA1911ZZ
JMJIA1912ZZ

INSTRUMENT PANEL ASSEMBLY
IP-21
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
MA
B
IP
N
O
P
 Put selector lever in the [D] position.
 Pull back instrument panel assembly, and then remove front
squawker LH harness clip (A).
 Remove instrument panel from passenger door opening portion.
CAUTION:
 Cover center console upper surface with a shop cloth to prevent it from being damaged.
 When removing instrument panel assembly, 2 workers are required so as to prevent it from drop-
ping.
48. Remove the following parts after removing instrument panel assembly.
 Front passenger air bag module. Refer to SR-12, "
Removal and Installation".
 Side ventilator grille LH/RH. Refer to VTL-46, "
SIDE VENTILATOR GRILLE : Removal and Installation".
 Side defroster nozzle LH/RH. Refer to VTL-47, "
SIDE DEFROSTER GRILLE : Removal and Installa-
tion".
 Ventilator duct LH/RH. Refer to VTL-48, "
VENTILATOR DUCT : Removal and Installation".
 Defroster nozzle. Refer to VTL-49, "
SIDE DEFROSTER NOZZLE : Removal and Installation".
 Antenna feeder. Refer to AV-44, "
Harness Layout".
INSTALLATION
Install in the reverse order of removal.
JMJIA1923ZZ

IP-22
< ON-VEHICLE REPAIR >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded ViewINFOID:0000000003816779
Removal and InstallationINFOID:0000000003819349
REMOVAL
1. Ashtray lamp harness 2. Cigarette lighter complete 3. Cigarette lighter ring
4. Console ashtray assembly 5. Instrument lower cover RH 6. Instrument lower cover LH
7. Center console assembly 8. Console switch panel 9. Console bracket
10. Inside key antenna 11. Console rear ashtray 12. Console rear finisher
13. Rear ventilator grille 14. Power socket cap 15. Power socket inner case
16. Console mask 17. Console lid assembly 18. Cup holder assembly
19. Console finisher assembly 20. Indicator lamp harness 21. Shift lock switch
22. Inner ashtray 23. Control device upper case 24. Auxiliary input jacks
JMJIA1924ZZ

CENTER CONSOLE ASSEMBLY
IP-23
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
MA
B
IP
N
O
P
1. Remove instrument finisher D.
 Remove instrument finisher D (1) fixing clips with remover tool
(A).
 Pull back instrument finisher D, and then remove instrument
finisher D.
2. Remove instrument finisher E.
 Remove instrument finisher E (1) fixing clips with remover tool
(A).
 Pull back instrument finisher E, and then remove instrument
finisher E.
3. Remove front body side welt LH. Refer to INT-39, "
Removal and Installation".
4. Remove hood opener lever fixing bolts. Refer to DLK-220, "
Removal and Installation".
5. Remove fuse block lid.
 Open the fuse block lid (1).
 Pull fuse block lid, backward to disengage from instrument
lower panel LH.
6. Remove instrument lower panel LH.
 Remove instrument lower panel LH (1) fixing screw (A).
 Pull instrument lower panel LH, backward to disengage from
instrument panel assembly.
 Release data link connector (pawl) then remove it from instru-
ment lower panel LH.
 Disconnect harness connectors and aspirator duct.
: Clip
JMJIA1892ZZ
: Clip
JMJIA1893ZZ
: Pawl
JMJIA1896ZZ
: Clip
: Pawl
JMJIA1897ZZ

IP-24
< ON-VEHICLE REPAIR >
CENTER CONSOLE ASSEMBLY
7. Remove instrument lower cover LH.
 Disengage instrument lower cover LH (1) fixing pawl and
metal clips.
 Pull back instrument lower cover LH.
8. Remove front body side welt RH. Refer to INT-39, "
Removal and Installation".
9. Remove instrument side finisher RH.
 Insert a remover tool (A) into lower space.
 Pull the instrument side finisher RH (1) crosswise.
10. Remove glove box assembly.
 Remove glove box assembly (1) fixing screws (A).
 Open the glove box lid.
 Remove glove box assembly fixing screws (B).
 Pull back glove box assembly.
 Disconnect harness connector.
11. Remove instrument side panel RH.
 Remove instrument side panel RH (1) fixing screw (A).
 Pull toward the direction the arrow is pointing.
: Pawl
: Metal clip
JMJIA1898ZZ
: Pawl
: Metal clip
JMJIA1900ZZ
: Pawl
JMJIA1901ZZ
: Clip
: Pawl
JMJIA1902ZZ

CENTER CONSOLE ASSEMBLY
IP-25
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
MA
B
IP
N
O
P
12. Remove instrument lower cover RH.
 Disengage instrument lower cover LH (1) fixing clip, pawl and
metal clips.
 Pull the instrument lower cover RH crosswise.
13. Remove selector lever knob. Refer to TM-155, "
Removal and Installation".
14. Remove console switch panel.
 Disengage pawls of console switch panel (1) with remover tool
(A).
 Pull up console switch panel.
15. Remove console finisher assembly.
 Put selector lever in the [N] position.
 Remove console finisher assembly (1) fixing metal clips and
pawls sequentially from the front side with remover tool.
 Pull console finisher assembly, upward to disengage from cen-
ter console.
 Disconnect harness connectors.
16. Remove control device upper case.
 Put selector lever in the [P] position.
 Remove control device upper case (1) mounting screws (A).
 Pull control device upper case, upward to disengage from con-
trol device assembly.
 Disconnect harness clip (B).
17. Remove console rear finisher.
 Pull back console rear finisher (1) by using a remover tool (A),
then disengage pawls and metal clips.
 Disconnect inside key antenna connector.
: Clip
: Pawl
: Metal clip
JMJIA1903ZZ
: Pawl
JMJIA1904ZZ
: Pawl
: Metal clip
JMJIA1905ZZ
JMJIA1906ZZ
: Pawl
: Metal clip
JMJIA1907ZZ

IP-26
< ON-VEHICLE REPAIR >
CENTER CONSOLE ASSEMBLY
18. Remove center console assembly.
 Remove center console fixing screws (A).
 Put front seat to the front most position.
 Remove center console fixing screws (B).
 Put front seat to the rear most position.
 Lift up center console assembly back side.
 Disconnect harness connectors.
INSTALLATION
Install in the reverse order of removal.
Disassembly and AssemblyINFOID:0000000003816781
DISASSEMBLY
1. Remove center console assembly. Refer to IP-22, "Removal and Installation".
2. Remove console lid assembly.
 Open the console lid.
 Remove console mask (1) fixing pawls with remover tool (A).
JMJIA1908ZZ
JMJIA1909ZZ
: Pawl
JMJIA1925ZZ

CENTER CONSOLE ASSEMBLY
IP-27
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
MA
B
IP
N
O
P
 Remove console lid assembly (1) fixing screws (A) and then
remove console lid assembly.
3. Remove power outlet. Refer to PWO-8, "
Removal and Installation".
4. Remove auxiliary input jacks. Refer to AV-663, "
Removal and Installation".
ASSEMBLY
Assemble in the reverse order of disassembly.
JMJIA1926ZZ