maintenance reset NISSAN X-TRAIL 2003 Electronic Repair Manual

EC-696
[YD]
TROUBLE DIAGNOSIS
–If the malfunction is displayed as soon as “DATA MONITOR” is selected, reset CONSULT-II to “MANU
TRIG”. By selecting “MANU TRIG” you can monitor and store the data. The data can be utilized for further
diagnosis, such as a comparison with the value for the normal operating condition.
FUNCTION TEST
This mode is used to inform customers of their vehicle condition of periodic maintenance.
CONSULT-II Reference Value in Data Monitor ModeEBS0037I
Remarks:
lSpecification data are reference values.
lSpecification data are output/input values which are detected or supplied by the ECM at the connector.
* Specification data may not be directly related to their components signals/values/operations.
SEF720X
MONITOR ITEM CONDITION SPECIFICATION
CKPS-RPM (TDC)
lTachometer: Connect
lRun engine and compare tachometer indication with the CONSULT-
II valueAlmostthesamespeedasthe
CONSULT-II value
COOLAN TEMP/S
lEngine: After warming up More than 70°C (158°F)
VHCL SPEED SE
lTurn drive wheels and compare speedometer indication with the
CONSULT-II valueAlmostthesamespeedasthe
CONSUT-II value
FUEL TEMP SEN
lEngine: After warming up More than 40°C (104°F)
ACCEL POS SEN
lIgnition switch: ON
(Engine stopped)Accelerator pedal: fully released 0.8 - 1.3V
Accelerator pedal: fully depressed More than 3.5V
ACCEL SEN 2
lIgnition switch: ON
(Engine stopped)Accelerator pedal: fully released 0.3 - 1.8V
Accelerator pedal: fully depressed More than 3.0V
OFF ACCEL SW
lIgnition switch: ON
(Engine stopped)Accelerator pedal: fully released ON
Accelerator pedal: slightly
depressedOFF