Peugeot 206 P Dag 2010 User Guide
Manufacturer: PEUGEOT, Model Year: 2010, Model line: 206 P Dag, Model: Peugeot 206 P Dag 2010Pages: 107, PDF Size: 3.94 MB
Page 11 of 107
25
TOTAL DISTANCE RECORDER
System which measures the total dis-
tance travelled by the vehicle during its
life. LIGHTING RHEOSTAT
System for manual adjustment of the
brightness of the instrument panel in re-
lation to the exterior brightness.
The total and trip distances are dis-
played for thirty seconds when the ig-
nition is switched off, when the driver's
door is opened and when the vehicle is
locked or unlocked.
TRIP DISTANCE RECORDER
System which measures a distance
travelled during a day or other period
since it was reset to zero by the driver.
With the ignition on, press the but-
ton until zeros appear. Activation
When the exterior lighting is on:
press the button to change the
brightness of the instrument panel,
when the lighting reaches the mini-
mum setting, release the button,
then press again to increase it,
or
when the lighting reaches the maxi-
mum setting, release the button,
then press again to reduce it,
when the lighting reaches the level
of brightness required, release the
button.
Deactivation
When the exterior lighting off, pressing
the button does not have any effect.
Page 12 of 107
INSTRUMENTS and CONTROLS
26
MONOCHROME SCREEN A Adjusting the parameters
Press and hold button 1 for two seconds
t o a c c e s s t h e s e t t i n g s ; t h e d a t a fl a s h e s ,
i n d i c a t i n g i t i s r e a d y t o b e m o d i fi e d .
Then, each press of button 1 scrolls
through the various data in the following
order:
- language of information displayed,
- hours (12 then 24 hour mode),
- minutes,
- year,
- month,
- day,
- unit of temperature (degrees Celsius or Fahrenheit).
Pressing button 2 a l l o w s m o d i fi c a t i o n
of the data selected. Press and hold for
rapid advance (return to start after the
last possible value).
After 7 seconds with no action, the main
d i s p l a y r e t u r n s ; t h e m o d i fi e d d a t a a r e
now recorded.
Note: Pressing button 2 b r i e fl y d i s p l a y s
the ambient temperature for a few sec-
onds.
When the ambient temperature is be-
tween -3° and 3 °C, the ambient tem-
perature display on the screen takes
priority over the clock display.
This displays the following information:
- time,
- date,
- a m b i e n t t e m p e r a t u r e * ( t h i s fl a s h e s
when it is between -3 and 3 °C),
- audio system information,
- a door check (e.g.: ''left front door open''),
- warning messages (e.g. ''remote c o n t r o l b a t t e r y fl a t ' ' ) o r i n f o r m a t i o n
messages (e.g. ''economy mode
active''), displayed temporarily.
* With digital air conditioning only.
Page 13 of 107
27
MONOCHROME SCREEN B
This enables the following information
to be displayed:
- time,
- date,
- a m b i e n t t e m p e r a t u r e * ( t h i s fl a s h e s when it is between -3 and 3 °C),
- status of the doors. The display shows you, by means of a graphic,
whether a door is open,
- warning messages (e.g. ''battery charge fault'') or information mes-
sages (e.g. "fuel level low''), dis-
played temporarily, can be cleared
by pressing button 1 or 2 ,
- trip computer. Setting the parameters
Press button
1 for two seconds to access
t h e s e t t i n g s . T h e i n f o r m a t i o n fl a s h e s t o
s h o w i t i s r e a d y t o b e m o d i fi e d .
Then, individual presses on button 1
allow you to scroll through the various
data in the following sequence:
- language in which the information is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Celsius or Fahrenheit),
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- day.
Pressing button 2 allows you to change
the information selected. Maintain the
pressure for rapid scrolling.
After 7 seconds without operation, the
screen returns to the normal display
a n d t h e m o d i fi e d d a t a i s r e c o r d e d .
Note: Pressing button 2 b r i e fl y d i s p l a y s t h e
outside temperature for a few seconds.
When the ambient temperature is be-
tween -3° and 3 °C, the temperature
display takes priority over the time on
the screen.
* With digital air conditioning only.
Page 14 of 107
INSTRUMENTS and CONTROLS
28
SCREEN B
TRIP COMPUTER
ZERO RESET
Press the stalk for more than two seconds.
Range
This shows the distance that can still be
covered with the fuel remaining in the
tank.
Note: t h i s fi g u r e m a y i n c r e a s e i f t h e r e
is a change in the style of driving or the
r o a d s u r f a c e , p r o d u c i n g a s i g n i fi c a n t
drop in current fuel consumption.
When the range is less than 20 miles
(30 km), three segments are dis-
p l a y e d . A f t e r fi l l i n g w i t h f u e l , t h e r a n g e
is displayed when it exceeds 60 miles
(100 km).
If horizontal segments are displayed for
long periods instead of digits, contact a
PEUGEOT dealer.
Pressing the button on the end of the
wiper
stalk enables the following data
to be displayed:
- range
- distance travelled
- average fuel consumption
- current fuel consumption
- average speed Average fuel consumption
This is the average fuel consumption
since the computer was last set to zero.
Current fuel consumption
This is the average fuel consumption
during the last few seconds.
This function is displayed only when the
vehicle is travelling at a speed greater
than 20 mph (30 km/h). Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.
Average speed
This is the average speed calculated
since the computer was last set to zero
(with the ignition on).
Page 15 of 107
29
VENTILATION
System which creates and maintains
comfortable conditions in the vehicle's
passenger compartment.
Air paths
The incoming air follows various routes
depending on the controls selected by
the driver:
- direct arrival in the passenger com-partment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning). The temperature control enables you to
obtain the level of comfort required by
mixing the air of the various circuits.
The air distribution control enables you
to diffuse the air in the passenger com-
partment combining several air vents.
T h e a i r fl o w c o n t r o l e n a b l e s y o u t o
increase or reduce the speed of the
ventilation blower.
The air circulating in the passenger
c o m p a r t m e n t i s fi l t e r e d a n d o r i g i n a t e s
either from the outside via the grille lo-
cated on the bonnet or from the inside
in air recirculation mode.
Control panel
The controls of this system are grouped
together on the centre console. De-
pending on the model, the functions
offered are:
- the level of comfort required,
- a i r fl o w ,
- air distribution,
- demisting and defrosting,
- manual or digital air conditioning
controls.
Air diffusion
1. Windscreen demisting/defrosting
vents.
2. Front side window demisting/de-
frosting vents.
3. Side adjustable air vents.
4. Central adjustable air vents.
5. Air outlets to the front footwells.
6. Lower air outlets (under the front
seats). *
* Only present with digital air conditioning.
Page 16 of 107
i
30
The air conditioning system does
not contain chlorine and does not
present any danger to the ozone
layer. In order for these systems to be fully effective, follow the operation and main-
tenance guidelines below:
If the interior temperature remains very high after the vehicle has been
p a r k e d i n t h e s u n f o r a c o n s i d e r a b l e t i m e , fi r s t v e n t i l a t e t h e p a s s e n g e r
compartment for a few minutes.
P l a c e t h e a i r fl o w c o n t r o l a t a s u f fi c i e n t l e v e l t o p r o v i d e a n a d e q u a t e r e -
newal of air in the passenger compartment.
To obtain an even air distribution, take care not to obst ruct the exterior air
intake grille located on the bonnet, the vents and the a ir passages under
the front seats.
Operate the air conditioning system for 5 to 10 minutes, on ce or twice a
month to keep it in good working order.
E n s u r e t h a t t h e p a s s e n g e r c o m p a r t m e n t fi l t e r i s i n g o o d c o n d i t i o n a n d
h a v e t h e fi l t e r e l e m e n t s r e p l a c e d r e g u l a r l y ( r e f e r t o t h e " C h e c k s " s e c t i o n ) .
W e r e c o m m e n d t h e u s e o f a c o m b i n e d p a s s e n g e r c o m p a r t m e n t fi l t e r .
T h a n k s t o i t s s e c o n d s p e c i a l a c t i v e fi l t e r , i t c o n t r i b u t e s t o t h e p u r i fi c a t i o n
of the air breathed by the occupants and the cleanliness of the passenger
compartment (reduction of allergic symptoms, bad odours and greasy de-
posits).
To ensure correct operation of the air conditioning system, you are also
advised to have it checked regularly.
If the system does not produce cold air, do not use it and contact a
PEUGEOT dealer.
When towing the maximum load on a steep gradient in high temperatures,
switching off the air conditioning saves engine power and t herefore improves
towing capacity.
The condensation created by the air conditioning results in a discharge of
water under the vehicle which is perfectly normal.
Page 17 of 107
31
HEATING/VENTILATION
The heating and ventilation can only operate when the engine is running.
1. Temperature adjustment
Turn the control from blue (cold) to red
(hot) to adjust the temperature to suit
your requirements. Windscreen and side windows
(demisting/defrosting).
2. Air distribution adjustment
Windscreen, side windows and
footwells. Footwells.
Centre and side vents.
The air distribution can be adjusted by
placing the control in an intermediate
position. 3 . A i r fl o w a d j u s t m e n t
Turn the control from position 1
to position 4 to obtain an air
fl o w s u f fi c i e n t t o e n s u r e y o u r
comfort.
4. Air intake/Air recirculation
The recirculation of interior air prevents
exterior odours and smoke entering the
passenger compartment.
The intake of exterior air prevents and
eliminates misting of the windscreen
and side windows. Air intake.
Air recirculation.
Move the manual control 4 to the right for
t h e " I n t e r i o r a i r r e c i r c u l a t i o n " p o s i t i o n .
Move the manual control 4 to the left to
r e t u r n t o t h e " E x t e r i o r a i r i n t a k e " p o s i t i o n
as soon as possible to prevent deteriora-
tion of the air quality.
These settings are recommended for
cold climates.
This setting is recommended for hot
climates.
Page 18 of 107
32
MANUAL AIR CONDITIONING
The air conditioning system can only operate when the engine is running.
1. Temperature adjustment
Turn the dial from blue (cold) to red
(hot) to adjust the temperature to
suit your requirements.
2 . A i r fl o w a d j u s t m e n t 3. Air distribution adjustment 4. Air intake/Air recirculation
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
These settings are recommended for
cold climates. Central and side vents.
This setting is recommended for hot cli-
mates.
Move the manual control
to the left to return to the
" E x t e r i o r a i r i n t a k e " p o s i t i o n .
The intake of exterior air prevents the
formation of condensation on the wind-
screen and side windows.
The recirculation of interior air prevents
exterior odours and smoke from enter-
ing the passenger compartment.
Used simultaneously with the air condi-
tioning, the air recirculation improves its
performance.
Used in a damp climate, the air recircu-
lation may cause condensation to form
on the windows.
Return to exterior air intake mode as soon
as possible to avoid deterioration of the
air quality and prevent condensation.
Move the manual control to
t h e r i g h t t o t h e " I n t e r i o r a i r
r e c i r c u l a t i o n " p o s i t i o n .
Turn the dial from position 1
to position 4 to obtain an
a i r fl o w s u f fi c i e n t t o e n s u r e
your comfort.
I f y o u p l a c e t h e a i r fl o w c o n t r o l i n p o s i -
tion OFF (deactivation of the system),
the temperature is no longer main-
tained at a comfortable level. How-
e v e r , a s l i g h t fl o w o f a i r , d u e t o t h e
movement of the vehicle, can still be
felt.
Page 19 of 107
33
Demisting - defrosting
To quickly demist or defrost the wind-
screen and side windows:
place the air intake control 4 in the
" E x t e r i o r a i r i n t a k e " p o s i t i o n ,
place the air distribution dial 3 in the
" W i n d s c r e e n " p o s i t i o n ,
place the temperature dial 1 and the air
fl o w d i a l 2 in the maximum position,
close the central vents,
switch on the air conditioning by
pressing the "A/C" button.
5. Air conditioning On/Off
S w i t c h i n g o n
Press the "A/C" button, the associ-
ated indicator lamp comes on.
The air conditioning does not operate
w h e n t h e a i r fl o w a d j u s t m e n t d i a l 2 i s
in position "OFF".
S w i t c h i n g o f f
Press the "A/C" button again, the
associated indicator lamp switches
off.
HEATED REAR SCREEN
S w i t c h i n g o n
The heated rear screen can only oper-
ate when the engine is running.
Press this button to demist/defrost the
rear screen. The indicator lamp asso-
ciated with the button comes on.
S w i t c h i n g o f f
The heated rear screen switches off
automatically to prevent an excessive
consumption of current.
It is possible to stop the demist-
ing/defrosting operation before it is
switched off automatically by press-
ing the button again. The indicator
lamp associated with the button
switches off.
If the engine is switched off before the
heated rear screen is switched off auto-
matically, demisting/defrosting will resume
next time the engine is switched on.
Switch off the heated rear screen as
soon as appropriate as lower cur-
rent consumption results in reduced
fuel consumption. The control button is located on
the air conditioning system con-
trol panel.
The air conditioning is designed
to operate effectively in all sea-
sons, with the windows closed.
It enables you to:
- lower the temperature, in summer,
- increase the effectiveness of the demisting, in winter above 0 °C.
Page 20 of 107
33
Demisting - defrosting
To quickly demist or defrost the wind-
screen and side windows:
place the air intake control 4 in the
" E x t e r i o r a i r i n t a k e " p o s i t i o n ,
place the air distribution dial 3 in the
" W i n d s c r e e n " p o s i t i o n ,
place the temperature dial 1 and the air
fl o w d i a l 2 in the maximum position,
close the central vents,
switch on the air conditioning by
pressing the "A/C" button.
5. Air conditioning On/Off
S w i t c h i n g o n
Press the "A/C" button, the associ-
ated indicator lamp comes on.
The air conditioning does not operate
w h e n t h e a i r fl o w a d j u s t m e n t d i a l 2 i s
in position "OFF".
S w i t c h i n g o f f
Press the "A/C" button again, the
associated indicator lamp switches
off.
HEATED REAR SCREEN
S w i t c h i n g o n
The heated rear screen can only oper-
ate when the engine is running.
Press this button to demist/defrost the
rear screen. The indicator lamp asso-
ciated with the button comes on.
S w i t c h i n g o f f
The heated rear screen switches off
automatically to prevent an excessive
consumption of current.
It is possible to stop the demist-
ing/defrosting operation before it is
switched off automatically by press-
ing the button again. The indicator
lamp associated with the button
switches off.
If the engine is switched off before the
heated rear screen is switched off auto-
matically, demisting/defrosting will resume
next time the engine is switched on.
Switch off the heated rear screen as
soon as appropriate as lower cur-
rent consumption results in reduced
fuel consumption. The control button is located on
the air conditioning system con-
trol panel.
The air conditioning is designed
to operate effectively in all sea-
sons, with the windows closed.
It enables you to:
- lower the temperature, in summer,
- increase the effectiveness of the demisting, in winter above 0 °C.