fan Peugeot 207 CC 2012 Owner's Manual

2
!
!
i
COMFORT
51


)
To exit this programme, press the "visi-
bility"
button again or the "AUTO"
but-
ton, the indicator lamp on the button
switches off and "AUTO"
is displayed.





)
Press this button to switch
the air conditioning off.
6. Air distribution adjustment


)
Press this button several
times in succession to di-
rect the air fl ow in turn to-
wards:

7. Air fl ow adjustment


)
Press the "small fan"
but-
ton to reduce the air fl ow.

8. Air intake/Air recirculation


Deactivation of the system



)
Press the "small fan"
button until
the fan symbol disappears.
This action deactivates all of the func-
tions of the air conditioning system.
The temperature is no longer main-
tained at a comfortable level. However,
a slight fl ow of air, due to the movement
of the vehicle, can still be felt.


)
Press the "large fan"
button again
or the "AUTO"
button to reactivate
the system with the values which
were set before it was deactivated.


)
Press this button to recircu-
late the interior air. The air
recirculation symbol is dis-
played.
5. Air conditioning On/Off
Avoid driving for too long with the
air conditioning deactivated. Avoid prolonged operation in inte-
rior air recirculation mode (risk of
condensation and of deterioration
of the air quality).


- the windscreen, the side windows
and the footwells,

- the windscreen and side windows
(demisting or defrosting),

- the central and side vents,

- the central vents, the side vents
and the footwells,

- the footwells.



)
Press the "large fan"
but-
ton to increase the air fl ow.
The air fl ow symbol, the fan, is fi lled in
progressively in relation to the value re-
quired. Air recirculation prevents exterior odours
and smoke from entering the passenger
compartment.


)
As soon as possible, press this but-
ton again to permit the intake of
exterior air and prevent misting.
For maximum cooling or heating of
the passenger compartment, you
can exceed the minimum value of
14 or the maximum value of 28.


)
Turn dial 2
or 3
to the left until
"LO"
is displayed or to the right
until "HI"
is displayed.


Resuming manual control

Depending on your requirements, you
can make a different selection from that
offered by the system by changing a
setting. The other functions will still be
controlled automatically.




)
Press the "AUTO"
button to return
to fully automatic operation.
Switching the system off may result in
discomfort (humidity, condensation).


)
Press the button again to return to
automatic operation of the air con-
ditioning. The symbol "A/C"
is dis-
played.

5CHILD SAFETY
88
LOCATIONS FOR CHILD SEATS SECURED WITH A SEAT BELT
In accordance with European regulations, this table indicates the options for the installation of child seats secured using the
seat belt and universally approved (a) in relation to the weight of the child and the seat in the vehicle.
(a) Universal child seat: child seat which can be installed in all vehicles using the seat belt.
(b) Group 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed on the front passenger seat.
(c) Consult the legislation in force in your country before installing your child on this seat.
(d) To install a child seat, move the front seat forward, then put the seat back in the upright position to leave enough space for
the child seat and the child's legs. The front seat can be moved further forward than the intermediate longitudinal position.

U
: seat suitable for the installation of a child seat secured using the seat belt and universally approved "rear facing" and/or
"forward facing".

U(R)
: identical to U
, with the vehicle's seat adjusted to its highest position.

Seat



Weight of the child
/indicative age


Less than 13 kg


(groups 0 (b) and
0+)
Up to 1 year approx

From 9 to 18 kg


(group 1)
From 1 to 3 years
approx

From 15 to 25 kg


(group 2)
From 3 to 6 years
approx

From 22 to 36 kg


(group 3)
From 6 to 10 years
approx
Front passenger seat (c)










- fi xed






U



U



U



U




- height
adjustable






U(R)



U(R)



U(R)



U(R)


Outer rear
seats (d)





U



U



U



U

5CHILD SAFETY
92
LOCATIONS FOR THE INSTALLATION OF ISOFIX CHILD SEATS
In accordance with the European regulation, this table indicates the options for the installation of ISOFIX child seats on the
vehicle seats fi tted with ISOFIX mountings.
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a
letter from A
to G
, is indicated on the child seat next to the ISOFIX logo.

IUF:
seat suitable for the installation of an I
sofi x U
niversal seat, " F
orward facing" and secured using the "Top Tether" upper
strap.

IL-SU:
seat suitable for the installation an I
sofi x S
emi- U
niversal seat which is:


- "rear facing" fi tted with a "Top Tether" upper strap or a stay,

- "forward facing" fi tted with a stay.
For the securing of the "Top Tether" upper strap, refer to the "Isofi x Mountings" paragraph.

X:
seat which is not suitable for the installation of an ISOFIX seat of the size category indicated.







Weight of the child/ indicative age


Less than 10 kg
(group 0)

Up to 6 months
approx

Less than 10 kg
(group 0)

Less than 13 kg
(group 0+)

Up to 1 year approx

From 9 to 18 kg (group 1)

From 1 to 3 years approx


Type of ISOFIX child seat



Infant car seat

*


"rear facing"



"rear facing"



"forward facing"




ISOFIX size category



F



G



C



D



E



C



D



A



B



B1




Universal and semi-universal
ISOFIX child seats which
can be installed on the front
passenger seat



X



IL-SU



IL-SU



IUF

IL-SU



* Infant car seats and "car cots" cannot be installed on the front passenger seat.

8CHECKS
120
CHECKING LEVELS
Check all of these levels regularly and
top them up if necessary, unless other-
wise indicated.
If a level drops signifi cantly, have the
corresponding system checked by a
PEUGEOT dealer or a qualifi ed work-
shop.
Take care when working under the bon-
net, as some parts of the engine can be
extremely hot (risk of burns).

Brake fluid level

To avoid any risk of scalding, unscrew
the cap by two turns to allow the pres-
sure to drop. When the pressure has
dropped, remove the cap and top up
the level.

Oil level

The reading will only be correct
if the vehicle is on level ground
and the engine has been off for
more than 30 minutes.
The check is carried out either when
the ignition is switched on using the oil
level indicator on the instrument panel,
or using the dipstick.
It is normal to top up the engine oil between
two services. The manufacturer recom-
mends a check of the oil level, and top up
if necessary, every 3 000 miles (5 000 km).
The brake fl uid level should be
close to the "MAX" mark. If it is
not, check the brake pad wear.

Changing the brake fl uid
Refer to the Warranty and Maintenance
Record for details of the interval for this
operation.


Coolant level

The coolant level should be
close to the "MAX" mark but
should never exceed it.
When the engine is warm, the
temperature of the coolant is regulated
by the fan. This can operate with the ig-
nition off.

On vehicles which are fi tted with a par-
ticle emission fi lter, the fan may oper-
ate after the vehicle has been switched
off, even if the engine is cold.
In addition, as the cooling system is
pressurised, wait at least one hour after
switching off the engine before carrying
out any work.

Screenwash and headlamp
wash * fluid

The minimum level of this fl uid
is indicated by an audible sig-
nal and a message on the mul-
tifunction screen.
Top up the level when you stop the ve-
hicle.

* According to country.
Changing the engine oil
Refer to the Warranty and Maintenance
Record for details of the interval for this
operation.
In order to maintain the reliability of the
engine and emission control system,
the use of additives in the engine oil is
prohibited.
Oil specifi cation
The oil must correspond to your engine
and conform to the manufacturer's rec-
ommendations.


Fluid specifi cation
The brake fl uid must conform to the
manufacturer's recommendations and
fulfi l the DOT4 standards.

Changing the coolant
The coolant does not have to be
changed.

Fluid specifi cation
The coolant must conform to the manu-
facturer's recommendations.


Fluid specifi cation
To guarantee optimum cleaning and
avoid freezing, plain water should not
be used to top up or replace this fl uid.

9PRACTICAL INFORMATION
139

Engine compartment fuses

The fusebox is placed in the engine
compartment, near the battery (left-
hand side).

Access to the fuses


)
Unclip the cover.

)
Replace the fuse (refer to the cor-
responding paragraph).

)
When you have fi nished, close the
cover carefully to ensure correct
sealing of the fuse box.

Fuse table


Fuse N°



Rating



Functions



F1

20 A
Engine control unit and fan assembly control relay
supply, timing and canister electrovalves (1.6 l 16V
THP), air fl ow sensor (Diesel), injection pump
(Diesel), water in Diesel sensor (Diesel), EGR
electrovalves, air heating (Diesel).

F2

15 A
Horn.

F3

10 A
Front wash-wipe.

F4

20 A
Headlamp wash.

F5

15 A
Fuel pump (petrol), Turbo electrovalves
(1.6 l 16V THP).

F6

10 A
Vehicle speed sensor, automatic gearbox.

F7

10 A
Electric power steering, directional headlamps,
directional headlamps control relay, switching and
protection unit (Diesel).

F8

20 A
Starter motor control.

F9

10 A
ABS/ESP control unit, brake pedal switch.

F10

30 A
Engine control unit actuators (petrol: ignition coils,
electrovalves, oxygen sensors, injectors, heaters,
electronic thermostat) (Diesel: electrovalves,
heaters).

F11

40 A
Air conditioning blower.

F12

30 A
Windscreen wipers Low/High speed.

F13

40 A
Built-in systems interface supply (ignition positive).

9PRACTICAL INFORMATION
140


Fuse N°



Rating



Functions



F14

30 A
Diesel heater (Diesel).

F15

10 A
Left main beam headlamp.

F16

10 A
Right main beam headlamp.

F17

15 A
Left dipped beam headlamp.

F18

15 A
Right dipped beam headlamp.

Maxi-fuse table

*

The maxi-fuses provide additional pro-
tection for the electrical systems. All
work on the maxi-fuses must be car-
ried out by a PEUGEOT dealer or a
qualifi ed workshop.




Fuse N°



Rating



Functions




Box 1



MF1

*
70 A
Fan assembly.

MF2

*
20 A/30 A
ABS/ESP pump.

MF3

*
20 A/30 A
ABS/ESP electrovalves.

MF4

*
60 A
Built-in systems interface supply.

MF5

*
60 A
Built-in systems interface supply.

MF6

*
30 A
Additional fan assembly (1.6 l 16V THP).

MF7

*
80 A
Dashboard fusebox.

MF8

* - Not used.


Box 2



MF9

*
80 A
Heating unit (Diesel).

MF10

*
80 A
Electric power steering.

MF11

*
40 A
Valvetronic electric motor (1.6 l 16V THP).

9
!
i
PRACTICAL INFORMATION
145
General recommendations
Observe the legislation in force in
your country.
Ensure that the weight of the tow-
ing vehicle is higher than that of the
towed vehicle.
The driver must stay at the wheel
of the towed vehicle.
Driving on motorways and fast
roads is prohibited when towing.
When towing a vehicle with all four
wheels on the ground, always use
an approved towing bar; rope and
straps are prohibited.
When towing a vehicle with the
engine off, there is no longer any
power assistance for braking or
steering.
In the following cases, you must al-
ways call on a professional recovery
service:


- vehicle broken down on a mo-
torway or fast road,

- when it is not possible to put the
gearbox into neutral, unlock the
steering, or release the parking
brake,

- towing with only two wheels on
the ground,

- where there is no approved
towing bar available...

TOWING A TRAILER

Your vehicle is primarily designed for
transporting people and luggage, but it
may also be used for towing a trailer. Driving with a trailer places greater de-
mands on the towing vehicle and the
driver must take particular care.

Distribution of loads


)
Distribute the load in the trailer so
that the heaviest items are as close
as possible to the axle and the nose
weight approaches the maximum
permitted without exceeding it.
Air density decreases with altitude, thus
reducing engine performance. Above
1 000 metres, the maximum towed load
must be reduced by 10 % for every
1 000 metres of altitude.
Refer to the "Technical Data" section for
details of the weights and towed loads
which apply to your vehicle.

Side wind


)
Take into account the increased
sensitivity to side wind.

Towbar suitable for the attachment of a
trailer with additional lighting and sig-
nalling.
We recommend the use of genuine
PEUGEOT towbars and their har-
nesses that have been tested and
approved from the design stage of
your vehicle, and that the fi tting of the
towbar is entrusted to a PEUGEOT
dealer or a qualifi ed workshop.

If the towbar is not fi tted by a PEUGEOT
dealer, it is imperative that it is fi tted in
accordance with the vehicle manufac-
turer's instructions.
Driving advice


Cooling
Towing a trailer on a slope increases
the temperature of the coolant.
As the fan is electrically controlled, its
cooling capacity is not dependent on
the engine speed.


)
To lower the engine speed, reduce
your speed.