instrument panel Peugeot 208 2017 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2017, Model line: 208, Model: Peugeot 208 2017Pages: 304, PDF Size: 11.45 MB
Page 4 of 304

2
.
Instrument panels 7
W arning and indicator lamps 1 0
Indicators
23
Trip computer
3
0
Date and time adjustment
3
3
Lighting dimmer
3
4Remote control
3
6
Doors
3
6
Locking – Key
3
7
Central locking
4
0
Boot
4
0
Alarm
41
Electric windows
4
3
PE UGEOT i- Cockpit 4 5
Steering wheel adjustment 4 6
Mirrors
46
Front seats
4
8
One-piece bench seat
5
3
2/3 – 1/3 split rear bench seat
5
3
Head restraints
5
4
Recommendations for ventilation
and air conditioning
5
5
Heating
5
6
Manual air conditioning
5
6
Dual-zone automatic air conditioning
5
7
Recirculation of interior air
6
0
Demisting – defrosting
6
0
Courtesy lamp
6
1
Interior ambient lighting
6
2
Sunroof blind
6
3
Interior fittings
6
3
Boot fittings
6
5
Rear shelf
6 5 L
ighting control stalk
6
7
Direction indicators
6
8
Automatic illumination of headlamps
6
9
Daytime running lamps/Sidelamps
7
1
Headlamp adjustment
7
1
Cornering lighting
7
1
Wiper control stalk
7
2
General safety recommendations 7 5
Hazard warning lamps 7 6
Emergency or assistance call
7
6
Electronic stability control (ESC)
7
8
Seat belts
8
1
Airbags
84
Child seats
8
8
Deactivating the passenger's front airbag
8
9
ISOFIX mountings and child seats
9
7
Child lock
1
03
Dashboard instrumentsAccess
Over view
Ease of use and comfort Lighting and visibility
Safety
Instruments and controls 4
Contents
Page 9 of 304

7
Instrument panels
Rev counter
Rev counter (x 1,000 rpm),
g raduation depends on the
engine.
Indicator
Engine coolant temperature
i n d i c a t o r.
Control button
Servicing reminder.
Setting the time.
Reset the function selected (ser vice indicator
or trip recorder).
Depending on version:
-
S
etting the time.
-
D
igital speedometer.
Instrument panel lighting
Adjusting the intensity of the
general lighting.
Speedometer
Analogue speedometer (mph
or km/h).
Gauge
Fuel gauge.
1
Dashboard instruments
Page 22 of 304

20
Warning / indicator lampStateCause Action / Observations
Service Temporarily on, with a
message displayed. One or more minor faults for
which there is no specific warning
lamp have been detected. Identify the cause of the fault using the message
displayed in the instrument panel.
You can deal with some problems yourself, such as a
door open or the start of saturation of the particle filter
(as soon as the traffic conditions allow, regenerate
the filter by driving at a speed of at least 40
mph
(60
km/h), until the warning lamp goes off).
For any other problems, such as a fault with the tyre
under inflation detection system, contact a PEUGEOT
dealer or a qualified workshop.
Fixed, accompanied
by the display of a
message. One or more major faults for
which there is no specific warning
lamp have been detected. Identify the cause of the fault using the message
displayed in the instrument panel; you must then
contact a PEUGEOT dealer or a qualified workshop.
+ Fixed, associated
with the flashing and
then fixed display of
the service indicator
spanner.The servicing interval has been
exceeded.
Only on BlueHDi Diesel versions.
Your vehicle must be ser viced as soon as possible.
Dashboard instruments
Page 26 of 304

24
Service indicator
Warning / indicator lampStateCause Actions / Observations
Service spanner Fixed, temporary when
the ignition is switched
on. There are between approximately
620
miles (1,000 km) and
approximately 1,860
miles
(3,000
km) before the next
service is due. The ser vice indicator is displayed for a few seconds on
the instrument panel. Depending on version:
-
t
he distance recorder display line indicates the
distance remaining (in kilometres or miles) before
the next ser vice is due.
-
a
n alert indicates the distance remaining (in
kilometres or miles) as well as the period before
the next ser vice is due.
The ser vice spanner goes off after a few seconds.
The alert may be triggered close to the due date.
Fixed, when the
ignition is switched on. Less than approximately
620
miles (1,000 km) remain
before the next ser vice is due. The ser vice indicator is displayed for a few seconds on
the instrument panel. Depending on version:
-
t
he distance recorder display line indicates the
distance remaining before the next ser vice is due.
-
a
n alert message indicates the distance remaining
as well as the period before the next ser vice is
due.
The ser vice spanner remains on to indicate that the
ser vice is required very soon.
The alert may be triggered close to the due date.
Dashboard instruments
Page 27 of 304

25
Warning / indicator lampStateCause Actions / Observations
Service spanner Flashing then fixed,
when the ignition is
switched on. The servicing interval has been
exceeded.
The ser vice indicator is displayed for a few seconds on
the instrument panel. Depending on version:
-
t
he total distance recorder display line indicates
the distance travelled since the due date was
reached. Value preceded by the "-" sign.
-
a
n alert message indicates that the due date has
passed.
The ser vice spanner remains on until the ser vice has
been performed.
The alert is triggered when the due date has passed.
+ Flashing then fixed,
when the ignition
is switched on,
associated with the
service warning lamp.The servicing interval has been
exceeded for Diesel BlueHDi
versions.
The ser vice indicator is displayed for a few seconds on
the instrument panel. Depending on version:
-
t
he total distance recorder display line indicates
the distance travelled since the due date was
reached. Value preceded by the "-" sign.
-
a
n alert message indicates that the due date has
passed.
The ser vice spanner remains on until the ser vice has
been performed.
The alert is triggered when the due date has passed.
The distance indicated (in kilometres or miles) is calculated according to the mileage covered and the time elapsed since the last ser vice.
1
Dashboard instruments
Page 28 of 304

26
Resetting the service indicatorRetrieving the service
information
After each service, the service indicator must
be reset to zero.
If you have carried out the ser vice on your
vehicle yourself:
F
s
witch off the ignition,
If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least 5
minutes for the reset to
be registered.
F
p
ress and hold the trip distance recorder
reset button,
F
s
witch on the ignition; the distance recorder
display begins a countdown,
F
w
hen the display indicates " =0", release
the button; the spanner disappears. You can access the ser vice information at any
time.
F
P
ress the trip distance recorder reset
button.
The ser vice information is displayed for a few seconds, then disappears.
Engine oil level indicator
(depending on version)
On versions fitted with an electric oil level
indicator, the state of the engine oil level is
displayed in the instrument panel for a few
seconds, after the servicing information. The level read will only be correct if the
vehicle is on level ground and the engine
has been off for more than 30
minutes.
Oil level incorrect
This is indicated by the display of the message
"Oil level incorrect" in the instrument panel
screen, accompanied by the ser vice warning
lamp and an audible signal.
If the low oil level is confirmed by a check using
the dipstick, the level must be topped up to
avoid damage to the engine.
For more information on Checking levels
,
refer to the corresponding section.
Oil level indicator fault
This is signalled by the display of the message
"Oil level measurement invalid" in the
instrument panel.
Contact a PEUGEOT dealer or a qualified
workshop.
Dashboard instruments
Page 29 of 304

27
AdBlue® range indicators
These range indicators are present only on
BlueHDi Diesel versions.
Once the AdBlue
® tank is on reser ve or after
detection of a fault with the SCR emissions
control system, when the ignition is switched
on, an indicator displays an estimate of the
distance that can be covered, the range, before
engine starting is prevented.
In the event of the risk of non-
starting related to a lack of
AdBlue
®
The engine start prevention system
required by regulations is activated
automatically once the AdBlue
® tank is
e m pt y.
In the event of a fault with the electric
indicator, the oil level is no longer
monitored.
If the system is faulty, you must check the
engine oil level using the manual dipstick
located under the bonnet.
For more information on Checking levels
,
refer to the corresponding section.
Range of the 1.6 BlueHDi engine
( E u r o 6 .1)
Range greater than 1,500 miles (2,400 km)
W hen switching on the ignition, there is no
automatic display of range in the instrument
panel.
Pressing this button
temporarily displays the
driving range with the
message "AdBlue: Range
greater than 1,500
miles
(2,400
km)" followed, if the
tank level of AdBlue permits,
with a message indicating
that you can top it up.
Remaining range between 1,500 and 375 miles
( 2,400 and 600 km) (1.6 BlueHDi Euro 6.1)
When switching on the ignition, the warning
lamp comes on, accompanied by an audible
signal and the display of a message (e.g. "Top
up AdBlue: Start-up not possible in x miles")
indicating the remaining range expressed in
miles or kilometres.
When driving, the message is displayed every
200
miles (300 km) until the level is topped up.
The reser ve level has been reached; it is
recommended that you top up as soon as
possible.
1
Dashboard instruments
Page 30 of 304

28
Remaining range less than 375 miles
( 600 km) (1.6 BlueHDi Euro 6.1)
When switching on the ignition, this warning
lamp flashes, accompanied by the permanent
lighting of the ser vice warning lamp, an audible
signal and the display of a message (e.g. "Top
up AdBlue: Start-up not possible in x miles")
indicating the remaining range expressed in
miles or kilometres.
When driving, this message is displayed every
30
seconds until the AdBlue level has been
topped up.
It is essential to top up as soon as possible and
before the tank is completely empty; other wise
it will not be possible to restart the engine after
the next stop.
Breakdown related to a lack of AdBlue
®
The AdBlue® tank is empty: the starting
inhibition system required by legislation
prevents starting of the engine. When switching on the ignition, this warning
lamp flashes, associated with an audible
signal and the display of the message "Top up
AdBlue: Starting impossible". To be able to restart the engine, it is
essential to add at least 4 litres of AdBlue
®
to its tank.
Range of the 1.5 BlueHDi
engine (Euro 6.2)
Range greater than 1,500 miles (2,400 km)
W hen switching on the ignition, there is no
automatic display of range in the instrument
panel.
Pressing this button
temporarily displays the
driving range with the
message "AdBlue: Range
greater than 1,500
miles
(2,400
km)" followed, if the
tank level of AdBlue permits,
with a message indicating
that you can top it up.
Remaining range between 1,500 and 500 miles
( 2,400 and 800 km) (1.5 BlueHDi Euro 6.2)
When switching on the ignition, this warning
lamp comes on for about 30 seconds,
accompanied by an audible signal and the
display of a message (e.g. "Top up AdBlue:
Start-up not possible in x miles") indicating
the remaining range expressed in miles or
kilometres.
The reser ve level has been reached; it is
recommended that you top up as soon as
possible.
These messages are accompanied by the
recommendation to not top up with more than
10
litres of AdBlue.
Remaining range between 500 and 60
miles
(800 and 100
km) (1.5 BlueHDi Euro 6.2)
When switching on the ignition, the warning
lamp comes on, accompanied by an audible
signal (1 beep) and the display of a message
(e.g. "Top up AdBlue: Start-up not possible
in x miles") indicating the remaining range
expressed in miles or kilometres.
Dashboard instruments
Page 32 of 304

30
Trip computer
Instrument panel display
screen
F Each press on the end of the wiper control stalk displays the information in
turn.
-
Trip 1 showing:
•
t
he average speed,
•
t
he average fuel consumption,
•
t
he distance travelled,
for the first trip.
Starting prevented
You have exceeded the authorised driving
limit: the starting prevention system does
not allow the engine to be started.
To be able to restart the engine, you must call
on a PEUGEOT dealer or a qualified workshop. Each time the ignition is switched on, these
warning lamps come on and the AdBlue
warning lamp flashes, accompanied by an
audible signal and the display of the message
"Emissions fault: Starting prevented".
During the permitted driving phase (between
685 and 0 miles (1,100 km and 0 km))
While driving, the message is displayed every
30 seconds while the fault with the SCR
emission control system persists.
The alert is repeated when switching on the
ignition.
You should go to a PEUGEOT dealer or a
qualified workshop as soon as possible.
Other wise you will not be able to restart the
vehicle. If a fault with the SCR system is confirmed
(after 30 miles (50 km) covered with the
permanent display of the message signalling
a fault), these warning lamps come on and the
AdBlue warning lamp flashes, accompanied by
an audible signal and the display of a message
(e.g. "Emissions fault: Starting prevented in
200 miles (300 km") indicating the remaining
range expressed in miles or kilometres.
Dashboard instruments
Page 35 of 304

33
Date and time adjustment
Instrument panel
F Each press of this button moves between the following settings:
-
h o u r,
-
minutes,
-
1
2 or 24 hour format.
With PEUGEOT Connect
Radio
F Select the Settings menu.
F
Sel
ect "Date and time ".
F
Sel
ect "Date " or "Time ".
F
C
hoose the display formats.
F
C
hange the date and/or time using the
numeric keypad.
F
C
onfirm with " OK".
Current fuel consumption
(mpg or l/100 km or km/l)
T his function is only displayed from
20
mph (30 km/h).
Calculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated since the last trip computer
reset.
Distance travelled
(miles or km)
Calculated since the last trip computer
reset.
Average speed
Calculated since the last trip computer
reset.
(mph or km/h)
Total time in stop mode
(minutes / seconds or hours / minutes)
If your vehicle is fitted with the Stop & Start, a
time counter adds up the time spent in STOP
mode during a journey.
It resets to zero every time the ignition is
switched on.
1
Dashboard instruments