jacking PEUGEOT 3008 2014 Owners Manual

Practical information
212
 Place the jack 2 in contact with one of the two front A or rear B locations provided on the underbody, whichever is closest to the wheel to be changed.
 Position the base plate of the jack on the ground and ensure that it is directly below the location A or B used.  Extend the jack until its head is in contact with A or B .  Raise the vehicle until there is sufficient space between the wheel and the ground to admit the spare (not punctured) wheel easily.
 Remove the bolts and store them in a clean place.  Remove the wheel.
Ensure that the jack is stable. If the ground is slippery or loose, the jack might slip and drop. Position the jack only at the locations Aor B . Ensure that the head of the jack is positioned centrally on the jacking
location. Otherwise there is a risk of damage to the vehicle and the jack may drop.