light Peugeot 307 2007.5 Service Manual

VISIBILITY
Front and rear lights (ring A)

 Place ring A in the required
position. Dipped/Main beam change

 Pull the stalk towards you.
Vehicles i tted with front fog lamps
and a rear fog lamp (ring C)
Lights off
Side lights Dipped/main beam
headlamps Rear fog lamp Front fog lamps ( i rst rotation
of the ring forwards)
Front and rear fog
lamps (2
nd rotation of
the ring forwards).

Note: to switch off
the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
Vehicles i tted with a rear fog
lamp (ring B)
This operates with the dipped/main
beam headlamps.

Note: when the lights are switched off
automatically, the rear fog lamp and
the dipped headlamps will remain on.
Turn the ring backwards to switch
off the rear fog lamp. The dipped
headlamps will then be switched off. The front fog lamps operate with
the side lights and the dipped
headlamps.
Front fog lamps and rear fog
lamp

 Turn ring B or C forwards to switch
on and backwards to switch off.
The status is coni rmed by the
indicator light on the instrument
panel .
Lights on buzzer
With the ignition off and the automatic
switching on of the lights deactivated,
when the driver’s door is opened, a
buzzer sounds to warn you that you
have left your lights on.
The rear fog lamp will be
deactivated automatically
when towing or when a
bicycle carrier i tted with a
fog lamp is i tted.
LIGHTS STALK
In good or rainy weather,
both day and night, the front
fog lamps and the rear fog
lamp are dazzling and are
prohibited.
Do not forget to switch them off when
they are no longer needed.
Automatic switching
on of the lights

VISIBILITY
74
Automatic switching on of the
lights
Side lights and dipped beam
headlamps switch on automatically if
the light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen
wipers stop.

Note: in foggy weather or in snow,
the brightness sensor can detect
sufi cient light. As a consequence, the
lights will not come on automatically.
Deactivation

 Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.

If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
Manual "Follow-me-home"
lighting

When the automatic switching on
of the lights function is deactivated ,
the side lights and dipped headlamps
remain on for the duration selected
for the automatic "follow-me-home"
lighting.

If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (l ashers)

Left: downwards.

Right: upwards.

Note: if you forget to cancel the
direction indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the selected
duration. Activation:

 switch off the engine,

 "l ash" the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 "l ash" the headlamps again,

 get out of the vehicle and lock it.

To deactivate or activate this
function, go to the multifunction
display coni guration menu.
The duration of the timed
period must also be set (15,
30, 60 seconds), via the multifunction
display coni guration menu, except in
the case of the monochrome screen
A for which it is pre-set.

Cancelling:

 "l ash" the headlamps,

 get out of the vehicle and lock it. Activation

 Turn ring A to the "AUTO"
position. The automatic lighting
is accompanied by a message on
the multifunction display.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.

VISIBILITY
74
Automatic switching on of the
lights
Side lights and dipped beam
headlamps switch on automatically if
the light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen
wipers stop.

Note: in foggy weather or in snow,
the brightness sensor can detect
sufi cient light. As a consequence, the
lights will not come on automatically.
Deactivation

 Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.

If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
Manual "Follow-me-home"
lighting

When the automatic switching on
of the lights function is deactivated ,
the side lights and dipped headlamps
remain on for the duration selected
for the automatic "follow-me-home"
lighting.

If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (l ashers)

Left: downwards.

Right: upwards.

Note: if you forget to cancel the
direction indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the selected
duration. Activation:

 switch off the engine,

 "l ash" the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 "l ash" the headlamps again,

 get out of the vehicle and lock it.

To deactivate or activate this
function, go to the multifunction
display coni guration menu.
The duration of the timed
period must also be set (15,
30, 60 seconds), via the multifunction
display coni guration menu, except in
the case of the monochrome screen
A for which it is pre-set.

Cancelling:

 "l ash" the headlamps,

 get out of the vehicle and lock it. Activation

 Turn ring A to the "AUTO"
position. The automatic lighting
is accompanied by a message on
the multifunction display.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.

VISIBILITY
75
For vehicles i tted with halogen
bulbs, depending on the load in your
vehicle, adjusting the beam of your
headlamps is recommended.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 5 people.


2. 5 people + maximum authorised
loads.

3.
Driver + maximum authorised loads.

Initial setting is position 0. On vehicles with xenon bulbs:

when stationary , the system automatically
corrects the height of the beam, whatever
the load of the vehicle. The driver is then
assured of having optimum lighting and
not causing a
nuisance to other road
users.

In cases of malfunction ,
the service warning light
comes on on the instrument
panel, accompanied by
an audible signal and a
message on the multifunction display.
The system places your headlamps
to the low position.
Do not touch the xenon bulbs.
Contact a PEUGEOT dealer.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
This warning light comes
on on the instrument panel.
MANUAL ADJUSTMENT OF
THE HEADLAMPS
AUTOMATIC HEADLAMP
ADJUSTMENT
* According to country.

VISIBILITY
78
1. Front courtesy light 2. Map reading lights
Permanently off.
Permanently on.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds
after the last door is closed.
In this position, the courtesy
light comes on automatically:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location function is used. Different lighting times are available:
- with the ignition off or on,
approximately 10 minutes,
- in economy mode, approximately 30 seconds,
- when the engine is running, no limit. With the ignition on, press
the corresponding switch.
COURTESY LIGHTS

VISIBILITY
79
3. Rear courtesy light
Note: on the saloon, the front
courtesy light (in the "permanently
on" position) forces the switching on
of the rear courtesy light if the switch
is in the central position.
To switch off the rear courtesy light,
place the switch in the "permanently
off" position.
In this position, the courtesy
light comes on automatically:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location function is used. Permanently off.
Permanently on when the
ignition is on (function not
available in economy mode).
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds
after the last door is closed.
4. Rear reading lights (estate)
The reading light comes on:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location function is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
With the ignition on (function not
available in economy mode), press
the switch to obtain permanent
lighting.
Press the switch again to switch the
reading light off.

LAYOUT
80
With the ignition on, the mirror is
automatically lit up when the l ap is
opened. The front courtesy light and a spec-
tacles holder are i tted in the roof
console.
To open or close the spectacles hold-
er, press the recess in the cover. The athermic windscreen has two
non-rel ective zones located either
side of the base of the interior mirror.
They are intended for afi xing toll
cards and/or car park tickets.
SUN VISOR WITH ILLUMINATED
COURTESY MIRROR
THE ROOF CONSOLE AREAS FOR TOLL CARDS/
CAR PARK TICKETS

LAYOUT
85

1. Rear parcel shelf
To remove the shelf:
- unhook the two strings,
- slightly raise the shelf, then remove it.
The shelf can be stored:
- either behind the front seats,
- or behind the rear seat.

2. Hooks

3. Stowing rings
4. Luggage retaining net
Hooked onto the stowing rings, this
enables your luggage to be secured.

5. Open storage trays

6. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the left-hand side of the parcel
shelf.
It is supplied from the "Running"
position.
BOOT LAYOUT (SALOON)

LAYOUT
87
BOOT LAYOUT (ESTATE)
4. Boot l oor and pillar stowing rings
5. Rear seat stowing rings
6. Luggage retaining net
Secure the net hooks in the stowing
rings on the l oor or on the folded
rear seat (two horizontal positions) or
secure the net hooks in the stowing
rings on the boot pillars and in the
l oor rings at the rear of the boot (one
vertical position).
7. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the load space cover left support.
It is supplied from the "Running"
position. 8. High load retaining net i xings
The high load retaining net can be
installed behind the front or rear
seats.
Open the covers of the corresponding
upper i xings.
Fit the ends of the metal bar in these
i xings.
To install the high load retaining net:
- behind the front seats, lift the rear
seat cushion, hook the net straps
on the i xings then fold the rear
seat;
- behind the rear seat, hook the net straps in the stowing rings on the
l oor.
The rings are located directly below
the corresponding upper i xings.
Pull the two straps taut.
9. Grab handles and coat hooks
1. Load space cover
To install it:
- position the front ends of the
cover on its support and press
gently to put it in place,
- unfold the cover fully,
- position the rear ends of the cover on its support and press gently to
put it in place.
To remove it:
- unclip the rear ends,
- fold the cover fully,
- unclip the front ends and remove the cover.
To store it, slide it under the rear
seats (location A ).
2. Floor storage trays (2/3 - 1/3)
3. Storage nets
One of them contains the luggage
retaining net.

SAFETY
88
Press the button, the direction indica-
tors l ash.
They can operate with the ignition
off.
Press one of the spokes of the
steering wheel.
Automatic lighting of hazard
warning lights *
When braking in an emergency, de-
pending on the deceleration, the hazard
warning lights come on automatically.
They switch off automatically the i rst
time you accelerate.
It is also possible to switch them off
by pressing the button.
HORN HAZARD WARNING LIGHTS
* According to country.