window Peugeot 307 CC 2003 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2003, Model line: 307 CC, Model: Peugeot 307 CC 2003Pages: 173, PDF Size: 2.12 MB
Page 3 of 173
22-09-2003
3YOUR 307 CC AT A GLANCE
1 -Speaker (tweeter).
2 - Windscreen demisting vents.
3 - Alarm button.
4 - Multi-function display.
5 - Central locking button.
6 - Hazard warning lights switch.
7 - Electronic stability control(ESP/ASR) button.
8 - Central adjustableheating/ventilation ventsand air flow regulation.
9 - Instrument panel.
10 - Windscreen wash-wipe/tripcomputer stalk.
11 - Driver's air bag. Horn.
12 - Audio remote control stalk.
13 - Headlamp height adjustment. 14 -
Electric mirror controls. Window controls.Rear window disarming control.
15 - Steering lock and ignition.
16 - Lights and directionindicators stalk.
17 - Cruise control.
18 - Steering wheel adjustmentcontrol.
19 - Gear lever.
20 - 12 V accessories socket.
21 - Can holder.
22 - Retractable roof control.
23 - Simultaneous control of all4 windows.
24 - Storage compartment.
25 - Coin storage. Passenger air bag disarming switch*.
26 - Handbrake.
27 - Rear footwell heating vent. 28 -
Side air bags.
29 - Front ashtray.
30 - Heating/automatic air conditioning controls.
31 - CD changer.
32 - Audio RD3 or
audio/telephone RT3.
33 - Passenger air bag.
34 - Glove box.
35 - Fuse box.
36 - Bonnet opening control.
37 - Side adjustableheating/ventilation vent andair flow regulation.
38 - Side window demisting vent.
* According to destination.
Page 5 of 173
22-09-2003
100
5YOUR 307 CC AT A GLANCE
THE RETRACTABLE ROOF Before operating the roof: It is advisable to park the vehi- cle on level ground, it is possi-ble to carry out the operationat a speed below 6 mph
(10 km/h).
Ensure that the screen 1is
hooked on (no object must beplaced on the screen or on thehinged covers 2; if there is
luggage in the boot, this mustnot push the screen upwards).
Check that no object has beenplaced on the rear parcelshelf.
Close the boot correctly.
Turn the ignition key to the
accessories or running posi-tion (1st or 2nd notch). It isadvisable to carry out the oper-ation with the engine running. Opening the roof
Pull button 3until the roof
opening operation is com- plete, confirmed by an audiblesignal.
Closing the roof Press button 3until the roof
closing operation is complete, confirmed by an audible signal.
Note: if you continue to pull or
press button 3once the cycle is
complete, the four windows riseagain. When carrying out roofopening or closing opera-tions, to avoid any risk of
injury, ensure that there isno one in the proximity of
the moving parts. Operation of the roof is the sole
responsibility of the driver.
To guarantee correct opera- tion, do not release button 3when the roof is in an interme-diate position (neither com-pletely open nor completely
closed). However, in the event
of danger, release the controlbutton and the operation will
stop instantly. Once the dangerhas been eliminated, completethe operation.
Page 9 of 173
22-09-2003
11 0
7YOUR 307 CC AT A GLANCE
ELECTRIC WINDOWS
1 - Driver's electric window.
2 - Passenger's electric window.
3 - Rear right electric window.
4 - Rear left electric window.5 - Disarming of the rear window switches.6 - Simultaneous control of all four windows. Manual operation: Press or pull the switch gently. The window stops when the switch is released.
Automatic operation: Press or pull the switch firmly. A single press opens or closes the window
completely.
Front windows safety auto-reverse: when the window rises
and meets an obstacle, it stops and partially lowers. ELECTRIC MIRRORS
Place control 7to the right or
to the left to select the mirror to be adjusted.
Move control 8in all four
directions to adjust.
Return control 7to the central
position.
When parking, the mirrors can be
folded electrically, by pulling con-trol 7rearwards or automatically
on locking the vehicle.
109
Page 35 of 173
22-09-2003
YOUR 307 CC IN DETAIL
36
Parameter configuration Monochrome screen B Press button
1for two seconds to
gain access to the settings.
Then, each press of this button permits scrolling of the various parameters.
Ð language of the information displayed,
Ð unit of speed (km or miles),
Ð unit of temperature (degrees Celsius or Fahrenheit),
Ð time format (12 or 24 hours),
Ð hour,
Ð minute,
Ð year,
Ð month,
Ð day.Pressing button 2enables you to
change the parameter selected. Continue pressing the button forrapid scrolling. After ten seconds without action, the
screen returns to the usual display,the modified data are recorded.
Ð configuration (see corresponding
section),
Ð map (see section "Satellite naviga- tion system").
A few definitions Superimposed display: a window appears over the current application for a short while, toannounce a change of status ofanother application. Permanent application: main application currently in use, displayed in the main screen
window. Contextual menu: limited menu associated with the main application currently in use,displayed in the main screen
window.
Colour screen DT Main menu
Press the RT3 audio/telephone "MENU"
button to access the main
menu and select one of the following
applications:
Ð navigation - guidance (see section "Satellite navigation system"),
Ð trip computer (see corresponding section),
Ð directory (see "RT3 audio/tele- phone" section),
Ð telematics (see "RT3 audio/tele- phone" section),
Page 36 of 173
22-09-2003
YOUR 307 CC IN DETAIL
36
Parameter configuration Monochrome screen B Press button
1for two seconds to
gain access to the settings.
Then, each press of this button permits scrolling of the various parameters.
Ð language of the information displayed,
Ð unit of speed (km or miles),
Ð unit of temperature (degrees Celsius or Fahrenheit),
Ð time format (12 or 24 hours),
Ð hour,
Ð minute,
Ð year,
Ð month,
Ð day.Pressing button 2enables you to
change the parameter selected. Continue pressing the button forrapid scrolling. After ten seconds without action, the
screen returns to the usual display,the modified data are recorded.
Ð configuration (see corresponding
section),
Ð map (see section "Satellite naviga- tion system").
A few definitions Superimposed display: a window appears over the current application for a short while, toannounce a change of status ofanother application. Permanent application: main application currently in use, displayed in the main screen
window. Contextual menu: limited menu associated with the main application currently in use,displayed in the main screen
window.
Colour screen DT Main menu
Press the RT3 audio/telephone "MENU"
button to access the main
menu and select one of the following
applications:
Ð navigation - guidance (see section "Satellite navigation system"),
Ð trip computer (see corresponding section),
Ð directory (see "RT3 audio/tele- phone" section),
Ð telematics (see "RT3 audio/tele- phone" section),
Page 49 of 173
22-09-2003
YOUR 307 CC IN DETAIL
50
Stalk movement Function
A Press: audio//telephone on/off. Rotation: volume adjustment - Audio settings: bass, treble, loudness, fader (front/rear balance),
balance (left/right balance), automatic volume.
B Ejection of CD.
C SOURCE Selection of source : radio, CD or CD changer.
D Call connect (Tel/Incoming call) -
Display contextual menu (Tel/Not engaged).
E Access "PEUGEOT" services menu.
Press for between 2 and 8 seconds: call "PEUGEOT Assistance" direct.
Press for more than 8 seconds: cancellation of the call made.
F MODE Change display.
Press for more than 2 seconds: display general information.
G Press: display contextual menu of display - Confirm inputting or adjustment.
Rotation: move within a menu - Select function/parameter - Adjust.
H Adjust higher frequency, step by step or continuous (long press).
Select previous CD (CD changer) - Movement on map (navigation).
I Adjust lower frequency, step by step or continuous (long press).
Select following CD (CD changer) - Movement on map (navigation).
J Infra-red window (IrDA)*.
K ESC Cancel current operation.
Press for more than 2 seconds: clear all superimposed displays and return to permanent application.
LSIM card cover.
M kkAutomatic search of higher frequency - Selection of following CD track. Movement on map (navigation).Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated forwards play.
Page 50 of 173
22-09-2003
YOUR 307 CC IN DETAIL51
Stalk movement Function
N jjAutomatic search of lower frequency - Selection of previous CD track. Movement on map (navigation).Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated backwards play.
O DARK 1st press: display top band (remainder of screen is black) - 2nd press: brightness removed (black screen) - 3rd press: return to normal screen.
Press for more than 5 seconds: reinitialisation of the system.
P MENU Display general menu - Press for more than 2 seconds: display help screen and list of
voice commands.
Q Disconnect.
Press for more than 2 seconds: transfer of the call to the voice mail or to a call
diversion number.
R BAND Select FM1, FM2, FMast, AM wavebands.
ASTPress for more than 2 seconds: automatic storing of stations (autostore).
S TA/PTY Traffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
T RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
U AUDIO Display window for adjusting bass, treble, loudness, sound distribution and
automatic correction of volume.
V SOS Press between 2 and 8 seconds: emergency call.
Press for more than 8 seconds: cancellation of the call made.
1 to 6 1 2 3 4 5 6 Select station in memory.
Press more than 2 seconds: store station being listened to in memory.
1 to 5 1 2 3 4 5 Selection of CDs in the CD changer.
0 to 9 * #0 1 2 3 4 5Alphanumeric keypad for entering text and telephone numbers.
6 7 8 9 * #
* During the year.
Page 77 of 173
22-09-2003
YOUR 307 CC IN DETAIL
78
The contextual menu associated with the
"Navigation - Guidance" applica-
tion appears as a superimposed display,when this is the application currently in
use in the main screen window.
This menu is limited to the followingfunctions:
Ð changing of the initial route (ente- ring of a diversion),
Ð switching to "Selection - Movement on map" mode*,
Ð storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
Ð changing of the route calculation criteria,
Ð stopping or resuming of guidance (displaying of the message whichchanges depending on the pre-vious status). General notes on the "Map" application* The
"Map" application has two dis-
play modes: Ð "Vehicle following on map" mode, representing active guid-ance on the map on the right and alarge-scale view of the next inter-section on the left,
Ð "Selection-Movement on map"mode, representing consultation ofthe map on the right and a com-pass on the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the "Move the
map" or "Exit map mode" function.
In "Selection-movement on map"
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category:
Ð "Administration and safety" symbol on a grey background,
Ð "Hotels, bars and restaurants" symbol on a yellow background,
Ð "Other businesses" symbol on a purple background,
Ð "Culture, tourism and entertain- ment" symbol on a white back- ground,
Ð "Sports centres and open air cen- tres" symbol on a green back-ground,
Ð "Transporation and automobiles" symbol on a blue background.
"Navigation - Guidance" contextual menu A
"Zoom" function enables you to
enlarge the map, in accordance withthe eleven preset levels relating tothe following scales:
Ð 100 m/cm, 200 m/cm, 500 m/cm,
Ð 1 km/cm, 2 km/cm, 5 km/cm,
Ð 10 km/cm, 20 km/cm, 50 km/cm,
Ð 100 km/cm, 200 km/cm. This is achieved by turning the dial. This mode permits:
Ð displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
Ð zooming in on the map in accor- dance with the eleven preset levels,
Ð displaying of the "Navigation -
Guidance" contextual menu.
"Vehicle following on map" mode
Page 78 of 173
22-09-2003
YOUR 307 CC IN DETAIL
78
The contextual menu associated with the
"Navigation - Guidance" applica-
tion appears as a superimposed display,when this is the application currently in
use in the main screen window.
This menu is limited to the followingfunctions:
Ð changing of the initial route (ente- ring of a diversion),
Ð switching to "Selection - Movement on map" mode*,
Ð storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
Ð changing of the route calculation criteria,
Ð stopping or resuming of guidance (displaying of the message whichchanges depending on the pre-vious status). General notes on the "Map" application* The
"Map" application has two dis-
play modes: Ð "Vehicle following on map" mode, representing active guid-ance on the map on the right and alarge-scale view of the next inter-section on the left,
Ð "Selection-Movement on map"mode, representing consultation ofthe map on the right and a com-pass on the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the "Move the
map" or "Exit map mode" function.
In "Selection-movement on map"
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category:
Ð "Administration and safety" symbol on a grey background,
Ð "Hotels, bars and restaurants" symbol on a yellow background,
Ð "Other businesses" symbol on a purple background,
Ð "Culture, tourism and entertain- ment" symbol on a white back- ground,
Ð "Sports centres and open air cen- tres" symbol on a green back-ground,
Ð "Transporation and automobiles" symbol on a blue background.
"Navigation - Guidance" contextual menu A
"Zoom" function enables you to
enlarge the map, in accordance withthe eleven preset levels relating tothe following scales:
Ð 100 m/cm, 200 m/cm, 500 m/cm,
Ð 1 km/cm, 2 km/cm, 5 km/cm,
Ð 10 km/cm, 20 km/cm, 50 km/cm,
Ð 100 km/cm, 200 km/cm. This is achieved by turning the dial. This mode permits:
Ð displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
Ð zooming in on the map in accor- dance with the eleven preset levels,
Ð displaying of the "Navigation -
Guidance" contextual menu.
"Vehicle following on map" mode
Page 79 of 173
22-09-2003
YOUR 307 CC IN DETAIL79
This mode permits:
Ð selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
Ð lateral movement on the map by means of the four directionalarrows, representing the four cardi-nal points (North, East, South,
West),
Ð zooming in on the map in accor- dance with the eleven preset levels,
Ð displaying of the "Map"contextual
menu.
"Selection - Movement on map"mode
From the general menu , the main
"Map" menu offers various options
for guidance management:
Ð switching to "Selection - Movement on map" mode,
Ð direction of the map towards the North or in the direction of the vehicle,
Ð recentering of the map around the vehicle,
Ð opening of the services selection window visible on the map, suchas hotels, service stations, etc.
Ð displaying of the window for enter- ing the description for recordingthe current position of the vehiclein a directory file.
Map*The contextual menu associated with the
"Map"application and with
the "Selection-Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window. This menu is limited to the following functions:
Ð displaying of the information on the location selected on the map,
Ð selection of a location on the map as a destination,
Ð storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
Ð switching to "Vehicle following on map" mode.
* DT colour screen only.
"Map" contextual menu