display PEUGEOT 307 CC 2003 User Guide

29-09-2003





 
A
From the $&&
'& , the main
010 menu offers various options
for guidance management:
– switching to "Selection-Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, such as hotels, service stations, etc.
– displaying of the window for ente- ring the description for recording
the current position of the vehiclein a directory file.
1
The contextual menu associated with the
010 application and with the
0&&+&'&

'10mode appears as a superimposed dis-
play, when these are in use in the
main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
010
&E
'&

29-09-2003
sport programme
snow programme
 ark to  
 the vehicle or



 ,
with the handbrake on or off.
 everse to 
 (select this function with the vehicle
stationary, engine at idle).  eutral to



 and to 
, with the
handbrake on. 
if function is engaged inadvertently while
driving, allow the engine to return to idle before engaging function to accelerate.
 rive for  in automatic mode.
 anual for  in manual mode.



!"# $
%

&&
With the engine running, to move off from position :
 
















'


(
 select function ,  or , then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
You can also move off from position :
 release the handbrake, with yourfoot on the brake,
 select function ,  or , then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
)# * When the engine is at idle, brakes not applied, if function ,  or is select-
ed the vehicle moves even withoutthe accelerator being pressed. For this reason, 



+ ,

-
-




+ (
.


- .
When maintenance operations needto be carried out with the engine run-ning, apply the handbrake and selectposition .
/01!
" " 0
"!/
#"#" 0
*!#23














 




 










 








 



   
*


 +

  Move the lever in the gate to select a function. Once the function is selected, the corresponding indicator light appears on
the instrument panel display.

29-09-2003
#-
+

 Automatic changing of the &-


:
 select function in the gate.
The gearbox always selects the most suitable gear according to the follow-ing parameters:
– the style of driving,
– the road profile,
– the vehicle load. The gearbox is then operating in auto-adaptive mode, without anyaction on your part.
)# * Never select function when the
vehicle is moving. Never select functions or unless
the vehicle is stationary.Never change between functions to optimise braking on a slippery surface. 
For immediate maximum accelera-
tion without touching the gear lever,press the accelerator pedal down as
far as it will go (kickdown). The gear-box will automatically change downor maintain the gear selected untilmaximum engine speed is reached. When braking, the gearbox will auto- matically change down in order to
provide efficient engine braking. If you take your foot off the accelera-
tor suddenly, the gearbox will notchange to a higher gear for reasons
of safety.




.

 In addition to the auto-adaptive pro- gramme, there are two special pro-grammes. The programme is displayed on the instrument panel screen.


  Press button once the vehicle
has been started and function 
selected.
The gearbox automatically favours sporty driving and more dynamicacceleration.
.

 This programme improves starting
and drive when traction is poor.  Press button once the vehicle
has been started and function 
selected.
The gearbox adapts to driving on slippery roads. 
you can return to the auto-
adaptive programme at any time.  Press button or again to
switch off the programme you are in. 
-


 Manual changing of the
&-


:
 select function in the gate,
 push the lever to the 4sign to
change to a higher gear,
 pull the lever to the 5sign to
change to a lower gear.
You can change from position 
(driving in automatic mode) to posi- tion (driving in manual mode) at
any time.  It is only possible to change from one gear to another if the vehicle speedand engine speed permit. If they donot, the vehicle will operate tem-porarily in automatic mode. When the vehicle is stationary or
moving very slowly, the gearboxautomatically selects gear %.
Programme (sport) and (snow)
do not operate in manual mode.



!"# $ %%

29-09-2003
 
 Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the "warning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message /


/ on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.




6
Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message /#-
+


&
- / on the multi-function dis-
play, /5/and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from to 
and from to (this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. 1#2#7! # 6 Pull the handbrake to immobilise your vehicle. 
  




























!"# $
%8














 






 






 

29-09-2003
 
 Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the "warning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message /


/ on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.




6
Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message /#-
+


&
- / on the multi-function dis-
play, /5/and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from to 
and from to (this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. 1#2#7! # 6 Pull the handbrake to immobilise your vehicle. 
  




























!"# $
%8














 






 






 

29-09-2003
"#0" 
0"$ 9#:
#
# 0
"#2 $ "
0"$ 9!: These systems are linked and com-
plement the ABS.
The ASR system optimises drive to prevent the wheels skidding, by act-ing on the brakes of the drive wheelsand on the engine. It also allows thedirectional stability of the vehicle tobe improved on acceleration. If there is a variation between the tra- jectory followed by the vehicle and
that required by the driver, the ESPsystem automatically acts on theengine and the brake of one or morewheels, in order to put the vehicleback on course.

++
When a malfunction of thesystems occurs, the switchlight flashes and the warninglight comes on, accompa-nied by an audible signal
and the message /!>#

&-+/ on the multifunction
display.
Contact a PEUGEOT dealer to have the system checked.



!"# $
%?



#>!
6

In exceptional conditions (starting a vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels canmove freely and regain grip. 
Press the /! ;;/ switch,
located on the central section of the fascia.
The switch lights up and thewarning light comes on: the
ASR and ESP systems aredisarmed.
"






  automatically if the ignition is
switched off,
 automatically above 30 mph (50 km/h),
 manually by pressing the switchagain.


&

#


!
6


The warning light flashes if
the ASR or ESP is activated.

 !"#
 























 











 
 



 





$






%

 &




 


 



'()









 
"







 




'()



29-09-2003
 +

&-+ Place switch %in the 0 ! posi-
tion. The cruise control is not yet active and no speed has been
memorised. The display indicates:
.+

&-+
&&  Place switch %in position or
$  " to switch the system off.
#+
>




 As soon as you reach the chosen speed, press button 8or . This
memorises the speed, which will
be maintained automatically. Thedisplay indicates (e.g. at 80 mph(130 km/h)): 
It is possible to accelerate and
drive momentarily at a speed greater
than the memorised speed. Thevalue memorised flashes. When theaccelerator pedal is released, thevehicle will return to the memorisedspeed.
0 !
0"$>!! $  "!A
0-

+
&-+

this enables
the vehicle to maintain a steady speed
programmed by the driver, regardlessof the road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) with at least fourthgear engaged (second gear for theautomatic gearbox), .


- .
* During the year, according to engine.



!"# $
%B
0
+ 




 If you wish to cancel the memorised speed: Press button ?or the brake or clutch
pedal. The display indicates (e.g. at 80 mph (130 kmh)):

the speed memorised is can-
celled automatically if the vehiclespeed is less than 25 mph (40 kmh),or if the manual gearbox is in a gearlower than fourth (second gear forthe automatic gearbox) or if the ESPis activated.
+





 After cancellation, press button ?.
Your vehicle will return to the last
memorised speed. The display indi-cates (e.g. at 80 mph (130 km/h)):

29-09-2003



!"# $%
0







To memorise a speed higher than the previous one, there are twooptions: Without using the accelerator:  press button ;
A brief press increases by 1 mph (1 km/h). An extended press increases the
memorised speed progressively. Using the accelerator:  exceed the memorised speed until the required speed isreached,
 press button 8or .
To memorise a speed lower than theprevious one:  press button 8
A brief press decreases by 1 mph
(1 km/h). An extended press decreases
the memorised speed progressively.
0
+ 




  Place switch %in position or
$  " or switch off the ignition. 

++ In the event of a cruise control mal- function, the memorised speed iserased, the dashes flash for a fewseconds:
Contact a PEUGEOT dealer to have the system checked. 

the appearance of this display is
normal if the memorising conditions are not met.
*

 
 














29-09-2003



!"# $
%C
 +

&-+ 
Place switch %in the $  " posi-
tion. The limiter is not yet active. By default the display indicates:
.+

&-+
&&  Place switch %in position or
0 ! or switch off the ignition to
switch the system off. The last speed programmed remains in the
memory.






A speed can be memorised without
activation of the limiter.
A brief press on buttons 8and 
decreases or increases by 1 mph
(1 km/h). An extended press decreas-es or increases the memorised speed
progressively.
#+
>
+

&
 
Pressing button ?activates the lim-
iter, pressing this button again deac-tivates it. When the limiter is active, the display indicates (e.g. at 80 mph (130 km/h)):
0 !
0"$>!! $  "!A
$
&-+

this prevents the
vehicle speed exceeding the speed programmed by the driver (minimumspeed of 20 mph (30 km/h)).
"



-


+

-
.


-=
* During the year, according to engine.
!'+



 Pressing the accelerator to exceed the programmed speed will have no
effect unless the pedal is pressedfirmly (passing the 
&


,

+: .
The limiter is deactivated temporarily and
displays (e.g. at 80 mph (130 km/h)):
To re-activate the limiter, release the accelerator to slow down to a speedbelow the programmed speed. 
sometimes (on a steep
descent), the limiter may not prevent the vehicle from exceeding the pro-grammed speed, this speed flashes.


++ In the event of a limiter malfunction, the memorised speed is erased, thedashes flash for a few seconds:
Contact a PEUGEOT dealer to have the system checked.

29-09-2003
# 
2#* The air bags have been designed to maximise the safety of the occupantsin the event of serious collisions.They work in conjunction with the
force-limiting seat belts. The elec-tronic detectors register and analyseany abrupt deceleration of the vehicle:if the triggering threshold is reached,the air bags inflate instantly and pro-tect the occupants of the vehicle. Immediately after the impact, the air bags deflate rapidly so that they donot hinder the visibility of the occu-pants nor their exit if necessary fromthe vehicle. The air bags are not deployed in the case of collisions which are not serious, for which the seat belt is suf-ficient to ensure maximum protec-
tion. The seriousness of a collisiondepends on the nature of the obstacleand the speed of the vehicle at themoment of the collision.
#



 6


.





.+
= the gas escaping from the air
bags can be a minor irritant. ;"
# 
2#* These are folded in the centre of the steering wheel for the driver and in
the fascia for the front passenger.
They are deployed simultaneously,except in cases where the passengerair bag is disarmed.
;




&
- 
If this warning light comes on, accompanied by anaudible signal and the mes-sage /#


&
- / on the
multifunction display, con-
tact a PEUGEOT dealer to have thesystem checked. 






 
A
"

-


&6
&
6-
+ (












,






.
6-





,&
+
+ 





&





=
.
(

+ 
.- 



 


-
6
F-
&





.

&
= 
)



.+
&& ,
insert the key into the passenger air bag disarming switch %, turn it
to the /;;/position, then
remove the key keeping the slotin this position.
The air bag warning light on theinstrument panel is lit throughout thedisarming process.
* According to destination.



!"# $
%?