display PEUGEOT 307 CC 2003 Owners Manual

29-09-2003





 

.
)&
/ This allows you to '&
the screen and thus select a function.
It also allows you:
– with a 0 &$0 type parameter, after selection, to & &or && & the
value,
– with a 0 0type parameter, to open the list and 
)$)the values.
– with '1guidance, to increase the 2'.
!& $
)&
/ This allows: – & to the list of controls (contextual menu) of the permanent display, if
there is no other display superimposed.
– .' of the selected function or the modified value.
– && of a 0 &$0 or 0 0 type parameter for modification.
00
#/
– brief press: modification of permanent display (audio system, navigation/ guidance...),
– Press for more than two second: display of $&&
.'.
0*0
#/
– brief press: &$of operation in progress or & $of last
superimposed display.
– pressing for more than two seconds: erasing of all superimposed displays and return to the permanent display.
0
0
#/
– Brief press: access to the $&&
'&.
– Press for more than two seconds: access to the )&1
'&.
)&

3&%1 This lets you select and validate the functions, controls and programmesdisplayed.

29-09-2003





 
4
Select the Navigation/Guidance icon using the dial , then validate by
pressing the dial to access the main
0
$
+
&0 menu.
&&
'&
Switch on the RT3 GPS audio/ telephone and insert the navigationCD-Rom. Press the 0
0button to access
the $&&
'& .
During guidance, if the navigation CD-Rom is present, the screen displays
different information depending on the manoeuvres to be carried out. ,- Current manoeuvre or compass or course (if calculation in progress or zone not mapped).
- Next manoeuvre to be carried out.
- Next road to be taken.
4- Current road.
5- Estimated time of arrival at destination.
6- Distance to final destination.
- Distance to next manoeuvre.

& /

– depending on the situation of the vehicle and on the reception of GPS information, this information may disappear from the screen temporarily,
– during guidance, the navigation CD-Rom must remain in the RT3 GPS audio/telephone.
&&
&

)&
 1%
)'&
&&
*
*
&&



,
65
4

,
654

29-09-2003





 5
The main 0
$
+
&0
menu offers various options for activa- tion or management of guidance:
– choice of the type of destination address (entering of address, service, GPS co-ordinates, stored address),
– modification to the initial route (entering of a diversion),
– displaying of the chosen destination,
– setting of the guidance option parameters,
– stop or resume guidance (displaying of the message which changes depending on the previous status).

$
+
&
The
0&&

& 0 menu
offers various options for reaching a destination:
 entering a postal address,
 selecting a service available in a town (town hall, hotel, cinema, airport...),
 entering GPS details,
 selecting a destination stored in the directory,
 selecting one of the last ten desti- nations.
&&$

& The last guidance address is displayed. Select and validate in succession the entry zones
0
70, 0&&0 , then
0
80 to fill them in.
The 090 function permits validation
of the address and access to theguidance activation function. The 0)&0 function permits
recording of the address in a directory file. The 0*&
0 function
permits display of the current address.
&$

&

29-09-2003





 
6
To enter the name of a town, select each letter by turning the dial, thenvalidate each letter by pressing thedial. If an error is made entering the letters, the 0*&0 function permits erasing
of the last letter entered.
&/ following the validation of a
letter, only those which could make up a name existing in the database
appear. As letters are entered, the 0 0
function indicates the number of towns beginning with the same
letters. Activation of this function permits selection of a town from thelist. When the list contains fewer thanfive
names, these are displayed auto-
matically. Select a town then validate
by pressing the dial. When the complete name of the town is displayed, select the 090
function then confirm by pressing thedial.
&/ once the town has been
entered, you can confirm by pressing 090 . You will then be guided to the
centre of this town automatically.
&$
)&
'&
.
)&
&& Enter the name of the street in the same way as the name of the town. When the full name of the street is displayed, select the 090function
then confirm by pressing the dial.
&$
)&
7

&&
 $
)&
1)'&
3&%1 Press the numeric key which corre- sponds to the letter required until theletter appears on the screen, thenconfirm by pressing the :key after
each letter.
&$
)&
'&
.
)&
7
Enter the number of the street pre- viously entered. Select the
090function, then
confirm by pressing the dial.
&/ if the number of the street
entered is not available, it is rejected.
You can also select a street from the 0; 0 function, which avoids
having to enter the street number.
&/ if the street selected does not
have a number, the list of junctions is
displayed automatically.
)&
.
& 

 1%&-
&&
)&
090
.<
)&
.'
#%
1& $
)&


&
)&
$&

.-
=7
)&
 
$&
#%
)&
% &'-
&$
)&
'#&
.
)&
&&

>

29-09-2003





 
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the 090function,
– input the details of your destination,
– automatically input the details of your current location by means of the 0*&
0 function.
!
&
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the 090function,
– fill in the 0
70and 0&&0
zones,
– automatically enter the name of your current location using the
0*&
0 function.
&&$

&& If you wish to be directed to a service, select the
&$%corresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the &&then confirm by
pressing the dial to access the
0!&
)&0 function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons 0?0and 0@0to consult the
list provided.When the establishment of your choice is displayed, you can:
 select the 090function to acti-
vate guidance towards this service,
 select the 0)&0function to enter
this establishment in your directo-
ry.

&/

if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.

29-09-2003





 
A
Select the BB&%BB function to
access the file in which the address you are looking for is archived. Select a description by scrolling down the list by means of the dial,then confirm by pressing the dial.The directory file is then displayed. Select the 090function, then press
the dial to access the guidance activation function.
=7
)&
&
$&
#%
)& % &'-
&&$

& 
&

)&
&%
Select the
0 
&&
& +
 0 function to access one of the
last twenty addresses stored. Select a description by scrolling down the list by means of the dial,then confirm it by pressing the dial.The complete address is then dis-played. Select the 090function, then press
the dial to access the guidance activation function.
=7
)&
 
$&
#%
)&
% &'-
&&
.
&
.
)&
 
&&  Activate the function
BB*)$$
)&
&BB , then input the distance
involved in the change required. Select the BB9BBfunction then vali-
date by pressing the dial.The system calculates the change which is closest to the value inputand gives you the option of whetheror not to use this change.
&
.
)&
&
You can consult the destination address at any time by activating the
0*) &
& 0 function on
the 0
$
+
&0 menu.
*)$$
)&

&

29-09-2003





 C
The menu BB&
1 BB
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
&
1
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
090
function then confirm by pressing thedial.
> $
)&
&
%)&  & Select the type of voice 0'&0or
0.&'&0 , after inserting the configu-
ration CD-Rom.
Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial.
&/ the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. $&'&
.
)&
&% This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
0&'&0 function, then
confirm by pressing the dial.Select the 090function, then confirm
by pressing the dial to record the changes made.
11$D& '$
$&
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination programmed.
&/ after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
*
&

29-09-2003
The contextual menu associated with the 0
$
+
&0 application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).





 
A
0
$
+
&0
&E
'&
*
"
..
& $&
*)&(


..
.' This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
0



..
.'+
0 function on the 0
&&' 0
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003
The contextual menu associated with the 0
$
+
&0 application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).





 
A
0
$
+
&0
&E
'&
*
"
..
& $&
*)&(


..
.' This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
0



..
.'+
0 function on the 0
&&' 0
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003





 A,
&&
&

)&
010 11F The 010 application has two
display modes:
G 0&)&
.7$

'10 mode, representing active guid-
ance on the map on the right and a large-scale view of the next inter-section on the left,
G 0&&+&'&

'10 mode, representing consultation ofthe map on the right and a compasson the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the 0&
)&
'10 or 0E
'1
'&0 function.
In 0&&+'&'&

'10
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category: – "Administration and safety" symbol on a grey background,
– "Hotels, bars and restaurants" symbol on a yellow background,
– "Other businesses" symbol on a purple background,
– "Culture, tourism and entertainment" symbol on a white background,
– "Sports centres and open air centres" symbol on a green background,
– "Transporation and automobiles" symbol on a blue background. A
0H'0 function enables you to
enlarge the map, in accordance with the thirteen preset levels relating tothe following scales:
– 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,– 10 km/cm, 20 km/cm, 50 km/cm,– 100 km/cm, 200 km/cm.This is achieved by turning the dial. This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 0
$
+
&0 contextual menu.
0&)&
.7$

'10
'&
This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– movement on the map by means of the four directional arrows, rep-resenting the four cardinal points
(North, East, South, West),
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 010contextual
menu.
* DT colour screen only.
0&&+&'&

'10'&