key Peugeot 308 2016 User Guide

53
308_en_Chap02_ouvertures_ed02-2015
Changing the battery
Do not throw the remote control
batteries away, they contain metals
which are harmful to the environment.
tak
e them to an approved collection
point. If the battery is flat, you are
informed by lighting of this warning
lamp in the instrument panel, an audible signal
and a message in the screen.
F


u
nc
lip the cover using a screwdriver in the
cutout.
F
Re
move the cover.
F


e
xt
ract the flat battery from its location.
F
Pl
ace the new battery into its location
observing the original direction.
F
Cl
ip the cover in place.
Remote control problem
Reinitialisation
F Switch off the ignition.
F tur n the key to position 2 (Ignition) .
Following disconnection of the vehicle battery,
replacement of the remote control battery or
in the event of a remote control malfunction,
you can no longer unlock, lock or locate your
vehicle.
F
Fi

rst of all, use the key in the lock to unlock
or lock your vehicle.
F


t
hen,

reinitialise the remote control.
If the problem persists, contact a P
eu

ge
Ot
d

ealer as soon as possible.
Battery ref.: CR1620 / 3 volts.
F
Pr
ess the closed padlock
immediately for a few seconds.
F
Sw

itch off the ignition and remove the key
from the ignition switch.
the r

emote control is fully operational again.
2
Access

54
308_en_Chap02_ouvertures_ed02-2015
"Keyless entry and Starting" with remote
control
Complete unlocking Selective unlocking
System for the central locking or unlocking
of the vehicle using the door lock or from a
distance.
It is also used to locate and start the vehicle, as
well as providing protection against theft.
Complete unlocking is activated by default.
unl

ocking is confirmed by rapid
flashing of the direction indicators for
two
se

conds.
At the same time, depending on
version, the door mirrors unfold. And
if your vehicle has an alarm, it is
deactivated F


t
o un
lock only the driver's door,
press the open padlock once.
F
Pr

ess the open padlock to unlock
the vehicle. F


t
o un
lock the other doors and the boot,
press the open padlock again.
thi

s setting is done in the "Driving
assistance" menu, then "Vehicle settings"
and "Vehicle access" .
use t

his button for access to
additional information.
Locking
Locking is confirmed by fixed lighting of
the direction indicators for a few s econds.
Depending on your version, the door
mirrors fold, the alarm is activated. F
Pr

ess the closed padlock to lock
the vehicle completely.
Ho
ld the button down until the
windows close completely.
Driving with the doors locked may make
access to the passenger compartment
by the emergency services difficult in
the event of an emergency.
Be aware of children when operating
the windows. If a door or the boot is not properly
closed, with the engine running
or the vehicle moving (speed
above 6
m

ph (10 km/h)), a message
appears for a few seconds.
Access

55
308_en_Chap02_ouvertures_ed02-2015
this function allows you to identify
y our vehicle from a distance,
particularly in poor light. Your vehicle
must be locked.
Locating your vehicle
F Press the closed padlock on the remote
c ontrol.
thi

s will switch on the courtesy lamps and
the direction indicators will flash for around
ten
se

conds.As a safety measure (children on
board), never leave the vehicle without
taking the key for the Keyless
ent

ry
and Starting system, even for a short
period.
gua

rd against theft when the key for
the Keyless
ent

ry and Starting system
is in the recognition zone with the
vehicle unlocked.
In order to preserve the charge of the
cell battery in the remote control, the
"hands-free" functions go into extended
stand-by after 21 days of non-use.
to
re

store these functions, press one of
the remote control buttons or start the
engine with the electronic key in the
reader.
2
Access

56
308_en_Chap02_ouvertures_ed02-2015
Complete unlocking
"Keyless entry and Starting" on your person
System for unlocking, locking and starting the
vehicle while keeping the electronic key on your
person.
F
Wi

th the electronic key on your person and
in the recognition zone A , pass your hand
behind one of the front door handles to
unlock the vehicle, then pull on the handle
to open the door.
the c

entral locking does not take place:
-
if t

he ignition is on,
-
if o

ne of the doors or the boot is still
open,
-
if t

he key for the Keyless
ent
ry and
Starting system has been left inside
the vehicle.
When the vehicle is locked, if it is
unlocked inadvertently, it will lock itself
again automatically after about thirty
seconds unless a door is opened.
And if your vehicle has an alarm, this is
not reactivated.
the f

olding and unfolding of the door
mirrors by the remote control can be
deactivated by a P
eu

ge
Ot d
ealer or a
qualified workshop.Selective unlocking
When selective unlocking of the driver's door is
activated.
F
Wi

th the electronic key in the driver's door
zone, pass your hand behind the driver's
door handle to unlock just the driver's door,
then pull on the door handle to open the
d o o r.
F
Wi

th the electronic key in the passenger's
door zone, pass your hand behind the
passenger's door handle to unlock the
whole vehicle, then pull on the door handle
to open the door.
By default, complete unlocking is activated.
thi

s setting is done in the "Driving
assistance" menu, then "Vehicle settings"
and "Vehicle access" .
use t

his button for access to
additional information.
unl

ocking is confirmed by rapid
flashing of the direction indicators for a
few
se

conds.
Depending on version, the door mirrors
unfold, the alarm is deactivated.
Access

57
308_en_Chap02_ouvertures_ed02-2015
Locking
F With the electronic key in the recognition
zone A , press with a finger on one of the
front door handles (at the markings) to lock
the vehicle.
Ma

intain pressure with your finger until the
windows close completely.
Locking is confirmed by fixed lighting of
the direction indicators for a few
s

econds.
Depending on your version, the door
mirrors fold, the alarm is activated.ens ure that no one prevents the correct
operation of the windows.
Be aware of children when operating
the windows.
For reasons of safety and theft
protection, do not leave your electronic
key in the vehicle, even when you are
close to it.
It is recommended that you keep it on
your person.
If a door or the boot is not properly
closed, with the engine running
or the vehicle moving (speed
above 6
m

ph (10 km/h)), a message
appears for a few seconds. F Wi
th the key in the recognition zone A,
press the tailgate locking control to lock
the
v

ehicle.
2
Access

58
308_en_Chap02_ouvertures_ed02-2015
Deadlocking
Deadlocking renders the exterior and
interior door controls inoperative.
It also deactivates the manual central
control button.
the
refore, never leave anyone inside
the vehicle when it is deadlocked.
Using the remote control
F Press the closed padlock to lock
t he vehicle completely.
Ma

intain pressure with your
finger for more than two seconds
to close the windows.
With the Keyless Entry and Starting system
By the doors:
F Wi th the electronic key in the recognition
zone A , press a finger on the door handle
(at the markings) to lock the vehicle.
F
Wi

thin five seconds, press the door handle
again to deadlock the vehicle.
ens

ure that no one is preventing the
correct closing of the windows.
Be aware of children when operating
the windows.
F
Pr

ess the closed padlock again within
five
se

conds to deadlock the vehicle. Accumulations (water, dust, grime, salt...) on the inner sur face if the door handle may affect
detection.
If cleaning the inner sur face of the door handle using a cloth does not restore detection,
contact a P
eu

ge
Ot d
ealer or a qualified workshop.
A sudden splash of water (stream of water, high pressure jet washer, …) may be identified
by the system as the desire to open the vehicle. By the boot:
F Wi
th the electronic key in the recognition
zone A , press the boot locking control to
lock the vehicle.
F
Wi

thin five seconds, press the boot locking
control again to deadlock the vehicle.
Access

59
308_en_Chap02_ouvertures_ed02-2015
Boot
F After unlocking the vehicle with
the remote control, press the
opening control and then open
the boot.
Opening using the "Keyless
Entry and Starting" remote
control
F Press this button, the vehicle i s
unlocked.
Opening using the key
Complete unlocking is selected by default.thi s setting is done in the "Driving
assistance" menu, then "Vehicle settings"
and "Vehicle access" .
Complete unlocking
Selective unlocking
F Press this button, the boot i s
unlocked.
use t

his button for access to
additional information.
F
Pr

ess the opening control, then open the
boot.
F
Pr

ess the opening control, then raise the
tailgate.
Complete unlocking
F With the electronic key on your person in
t he recognition zone A , press the opening
control then raise the tailgate.
Opening using the Keyless
Entry and Starting system
By default, complete unlocking is activated.thi s setting is done in the "Driving
assistance" menu, then "Vehicle settings"
and "Vehicle access" .
Selective unlocking
2
Access

60
308_en_Chap02_ouvertures_ed02-2015
When unlocking of the boot only is activated:
F With the electronic key in the recognition
zone A , press the boot unlocking control
to unlock just the tailgate, then raise the
tailgate.
unl

ocking is signalled by rapid flashing of the
direction indicators for a few seconds.
use t

his button for access to
additional information.
Closing
F Lower the tailgate using one of the interior
g rab handles.
If the boot is not closed correctly (the lock has
two positions): with the engine running or
when moving (speed above 6 mph (10 km/h)),
a message appears for a few seconds.
Tailgate release
Unlocking
F Fold back the rear seats to gain access to
t he lock from inside the boot.
F
In

sert a small screwdriver into hole A of the
lock to unlock the tailgate.
F
Mov

e the latch to the right.
Locking after closing
If the fault persists after closing again, the boot
will remain locked.System allowing the mechanical unlocking
of the boot in the event of a battery or central
locking system malfunction.
F
Wi

th the electronic key in the recognition
zone A , press the boot locking control to
lock the vehicle.
Locking is signalled by rapid flashing of the
direction indicators for a few seconds.
Locking with Keyless Entry
and Starting
Access

61
308_en_Chap02_ouvertures_ed02-2015
Back-up key
Unlocking/locking using the
integral key with Keyless
Entry and Starting
the integral key is used to lock and unlock the
v ehicle when the electronic key cannot operate:
-
ce

ll battery flat, vehicle battery discharged
or disconnected, ...
-
ve

hicle located in an area with strong
electromagnetic signals.
F
Ma

intain a pull on button 1 , to extract the
integral key 2 .
Locking the driver's door
F Insert the integral key in the door lock, then
t
urn it to the rear.
Unlocking the driver's door
F Insert the integral key in the door lock, then
turn it to the front.
Locking the passenger doors
F Open the doors.
F Fo r the rear doors, check that the child lock
is not on.
F
In

sert the integral key in the latch located
on the edge of the door and turn it an
eighth of a turn to the right for the right
hand door, and to the the left for the left
hand door.
F
Cl

ose the doors and check that the vehicle
has locked correctly from the outside.
If the alarm is activated, the audible
signal on opening a door with the key
(integral with the remote control) will
stop when the ignition is switched on.
Unlocking the passenger doors
F Pull the interior door opening control.
F
or more information on the child lock,
refer to the corresponding section.
2
Access

62
308_en_Chap02_ouvertures_ed02-2015
Changing the cell battery
Battery ref.: CR2032 / 3 volts.this replacement battery is available from a
P
eu

ge
Ot d
ealer or a qualified workshop.
A message appears in the instrument panel
screen when replacement of the battery is
needed.
F


u
nc
lip the cover using a small screwdriver
at the cutout.
F
Li

ft off the cover.
F
Re

move the flat battery from its location.
F
Fi

t the new battery into its location
observing the original direction of fitment.
F
Cl

ip the cover onto the casing.Do not throw the remote control
batteries away, they contain metals
which are harmful to the environment.
tak

e them to an approved collection
point. Following disconnection of the vehicle battery,
replacement of the remote control battery or
in the event of a remote control malfunction,
you can no longer unlock, lock or locate your
vehicle.
F
Pl

ace the mechanical key (integral with the
remote control) in the lock to unlock your
vehicle.
F
Re

move the mat under 12 V socket.
F
Pl

ace the electronic key in the housing
provided.
F
Sw

itch on the ignition by pressing S
tARt/
StO P.the

electronic key is fully operational again.
Remote control problem -
reinitialisation
If the problem persists, contact a PeugeOt d ealer
or a qualified workshop as soon as possible.
Access