radio PEUGEOT 4008 2014 Owner's Manual

316
02 STEERING MOUNTED CONTROLS








Increase / reduce audio volume.

Search for a higher / lower radio frequency.
Next / previous CD track.
CD fast forwards / backwards.

Long press: audio system on / off.
Short press: selection of the source in the
following order: FM1 / FM2 / FM3 / MW /
LW / CD.

317
03 GENERAL OPERATION


Press the PWR/VOL
button.
The last source selected before
switching off resumes operation.
The audio system functions can be
used when the ignition switch is in the
"ON" or "ACC" position.
To switch off, press the PWR/VOL

button again.

Adjusting the volume

Turn the PWR/VOL
knob to the left to
decrease the volume or to the right to
increase it. Press the SEL
knob repeatedly; the
audio mode changes in the following
order: BASS / TREBLE / FADER /
BALANCE / SCV and cancel.
Setting the audio modes







Switching on / off

The audio adjustment mode is deactivated, during operation of the
radio or a CD or after around 10 seconds with no action.
Adjusting the audio modes

Turn the SEL
knob to the left or right
to adjust the audio setting.

319
04 RADIO


Selecting radio source

Press the RADIO
button to switch on
the radio.

Press the RADIO
button repeatedly
to select the waveband; it changes in
the following order: FM1 / FM2 / FM3 /
MW / LW / FM1...
Automatic station search

Manual station search

Turn the SEL
knob to the left to search
the lower frequencies or to the right to
search the higher frequencies.
Press the "

" or "

" button to search
the lower frequencies or the higher
frequencies respectively.
The search begins automatically and
stops at the fi rst station found.

Selecting the waveband
















Selection / Presetting

320
04

Press one of the six buttons "1" to "6" until an
audible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
The number of the button and the associated radio
frequency appear in the screen.
Manual station presetting

To recall the pre-set stored setting, press the button and release it
within two seconds.

RADIO


You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
Automatic station presetting

Disconnecting the battery terminals clears the preset radio stations.

Stations can only be preset automatically on wavebands FM1,
FM2 and FM3.
Presetting new stations replaces the previous stations.
This presetting can be activated automatically irrespective of the
waveband selected.

Press the RADIO
button for more than
two seconds.
The six stations offering the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.

Recalling preset stations

Press one of the six buttons "1" to "6". The station
corresponding to the waveband selected appears on
the screen.

321
04 RADIO


The "Radio Data System" (RDS) function on the FM waveband
permits:


- access to the display of information, such as the name of the
station, ...

- listening to the same station while travelling through different
regions,

- temporary tuning to traffi c information announcements.
Most FM stations use RDS. These stations transmit non-audible data
in addition to their programmes.
The data transmitted in this way allows you access to various
functions, mainly displaying of the name of the station, automatic
retuning to alternative frequencies or temporary retuning to traffi c
information announcements.
RDS allows you to continue listening to the same station by means
of alternative frequencies that carry the same station. However, in
certain conditions, RDS alternative frequencies may not be provided
throughout the country. Radio stations do not cover the whole country,
which explains the loss of reception of the station during a journey.
"AF" alternative frequencies

Your radio automatically checks and selects the best frequency for
the radio station to which it is tuned (if the station broadcasts on
several transmitters or frequencies).
The frequency of a radio station covers approximately 30 miles
(50 km). The change from one frequency to another explains the
temporary loss of reception during a journey.
If the station to which you are listening does not have several
frequencies in the region in which you are currently located, you can
deactivate alternative frequencies.

Some stations are organised in a network.
In different regions, they broadcast different or shared programmes
depending on the time of day.
You can follow:


- a regional station only,

- the entire network, with the possibility that you will be listening
to a different programme.

REG regional mode

On long distance journeys, when the stored station becomes
weak, the radio searches fi rst for another frequency for the
same station (AF). Then, if this fails, it searches for a frequency
broadcasting the regional programme (REG). If this also fails, the
radio returns to the stored station.



















RDS


Press the MENU
button.

Press the SEL
knob repeatedly to
select the RDS mode: "AF", "REG"
and "TP" then turn the knob to select
the desired value.

322
04 RADIO


"TP" traffi c information

The " Traffi c Programme
" (TP) function permits automatic
and temporary switching to an FM station broadcasting traffi c
information.
The radio station or the source that you are listening to at this point
is put on hold.
Once the traffi c information has ended, the system switches back to
the radio station or the source that you were listening to initially.

Press the TP
button.
"TP" appears in the screen. If the
station is compatible, "RDS" also
appears.

If the radio detects traffi c information, "TRAF INF" appears on the
display, followed by the frequency of the broadcasting station, then
its name.
The volume is different from that of the previous source.
Following the broadcasting of the traffi c information, the volume
returns to that of the source prior to the interruption.

When "TP" appears in the screen, the radio stops only at RDS
stations broadcasting traffi c information.
"ALERT" emergency broadcasts

An emergency broadcast automatically and temporarily interrupts
the FM station or the source that you are listening to.
The message "ALERT" appears in the screen and the volume is
different from that of the previous source.
Following the emergency broadcast, the message disappears and
the volume returns to that of the source prior to the interruption.

"PTY" themed type of programme

Some stations offer the option of listening to a themed type of
programme as a priority, selected from the list available below:
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M,
CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ,
COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.

323

04 RADIO


Search for a "PTY" broadcast

Press the PTY/SCAN
button.

Ten seconds after reception, the PTY
mode is cancelled.
Press one of the six buttons "1" to "6" for more than
two seconds.
The sound cuts out then becomes audible again
when the programme has been stored.
The number of the button and the associated PTY
programme appear in the screen.
Presetting a "PTY" programme

You can preset up to six PTY programmes.
Each new programme stored replaces the previous one.

Turn the SEL
knob to select PTY
mode; the symbol fl ashes and an
automatic search is made.
Once the station has been found, its
name appears in the screen.

Press the " 
" or " 
" buttons to fi nd
another station.
Press the PTY/SCAN
button.

Turn the SEL
knob to select PTY

mode, then press one of the six
buttons "1" to "6" to defi ne the preset
location.

324
04 RADIO


Changing the display language of the "PTY" programme
Functions setting mode

This permits activation or deactivation
of the functions below.
Press the SEL
knob repeatedly; the
setting mode for the functions changes
in the following order: GRACENOTE
DB / AF / REG / TP-S / PI-S / PTY
(languages) / PH setting / CT / OFF.

The functions setting mode is deactivated after approximately
10 seconds without any action.

Press the MENU
button.

Press the SEL
knob repeatedly to
select the PTY lang
mode.

Turn the SEL
knob to select the
language (ENGLISH, FRANCAIS,
DEUTSCH, SVENSK, ESPAGNOL,
ITALIANO).
Press then MENU
button.

Turn the SEL
knob to the left to
deactivate the function ("OFF") or to
the right to activate it ("ON").

325
05 MUSIC MEDIA PLAYERS


This can play audio CDs (CD-DA, CD-Text, CD-R/RW)
or MP3 CDs.
Ejecting a disc
















CD player


Selecting CD mode

If the player already contains a disc,
press the MEDIA
button.
"MEDIA", the track number and the
playing time appear in the screen.

Insert circular compact discs only.
8 cm compact discs must be inserted in the centre of the player slot.
After inserting a disc, printed face upwards, the player starts
automatically.
Press this button to remove the
disc from the player. The system
automatically switches to radio mode.

Once ejected, if the compact disc is not removed within
fi fteen seconds, it is reloaded into the player.

331
06

Once the portable player / iPod ®
is
connected, make several successive
presses on the MEDIA
button and
select USB, the source selected is
displayed.
Once the player is selected, play
starts.
Play













Managing a track (or folder)


Stop

Press MEDIA
to change mode or
on RADIO
.
Turn the knob to select a previous or
next track.
Select a folder (or track)

Select a track
Press the knob to select the folder
and go down or up one level.

The knob can also be used for tracks.

USB PLAYER


Press the " 
" or " 
" button to select
the previous or next track respectively.
Press and hold to go faster.
Playing the start of each track

Press the PTY/SCAN
button to start
the play of the fi rst ten seconds of each
track in all folders. "SCAN" appears in
the screen and the corresponding track
number fl ashes.
Press this button again to quit this
mode.