Peugeot 406 2002.5 Owner's Manual

29-07-2002
TRIP COMPUTERDisplay B Display C
– the range,
– the distance travelled,
– the average consumption,
– the current consumption,
– the average speed.
Zero reset
Press the stalk for more than two seconds. Pressing the button on the end of the wiper stalk enables t
he following data to be dis
played:
– the current consumption and the range,
– the average consumption, the distance travelled and theaverage speed calculated over a period "1",
– the average consumption, the distance travelled and the average speed calculated over a period "2".
Periods "1"and "2"are defined by the frequency of the zero
reset. They allow, for instance, daily calculations over period
"1" and monthly calculations over period "2".
Zero reset
When the required period is displayed, press the stalk for
more than two seconds.
YOUR 406 IN DETAIL 137

29-07-2002
Range
The display shows the distance that
can still be covered with the fuel
remaining in the tank.
Note:this figure may rise if there is a
change in driving style or road sur
face, causing a significant drop in
current fuel consumption.
If there are less than 3 litres of fuel in
the tank, only three segments will be
displayed. Average consumption
This is the ratio between the amount
of fuel consumed and the distance
travelled since the computer was last
reset to zero.
The display stops at 30 l/100km.
Current fuel consumption
This gives the fuel consumption
recorded during the last two sec
onds. This function is only displayed
when the vehicle is travelling at more
than 12 m.p.h. (20 km/h).
The display stops at 30 l/100km. Average speed
This is obtained by dividing the dis
tance travelled by the period of time
the vehicle has been in use (with the
ignition on), since the computer was
last reset to zero.Distance travelled
This shows the distance travelled
since the computer was last reset to
zero.
After the trip computer has been
reset to zero, the range data
becomes meaningful only after the
vehicle has been in use for a certain
period.
If horizontal segments are displayed
instead of figures when driving, con
tact a PEUGEOT dealer.
YOUR 406 IN DETAIL
138

29-07-2002
ELECTRIC WINDOWS
1 Driver's electric window switch. You have two options:
Manual operation: press or pull switch 1gently. The window stops as soon
as the switch is released.
Automatic operation: press or pull switch 1fully.
One touch completely opens or closes the window.
Safety autoreverse
When the window on the driver's side rises and meets an obstacl e, it stops
and lowers again.
Overriding the safety autoreverse
In the case of frost, for example, if the window will not rise and goes into
safety autoreverse mode, lower it completely and raise it again immediate
ly, by pulling the switch until the window closes completel y.
2 Passenger's electric window switch.
3 Rear right electric window switch.
4 Rear left electric window switch.
5 Disarming the rear window switches (child safety).
YOUR 406 IN DETAIL 139

29-07-2002
EXTERIOR MIRRORS
Electric rear view mirrors
Turn knob 6to the right or to the left
to select the corresponding mirror.
Move knob 6in all four directions to
adjust.
When parked, the mirrors can be
folded back manually.
Foldback electric mirrors
With the ignition on, turn knob 6to
position A.
The outside of the mirror
on the driver's side is con
vex (area at edge defined
by dotted line) in order to
eliminate the 'blind spot'.
Objects observed in the driver's
and passenger's mirrors are in
reality closer than they appear.
This must be taken into account
to judge correctly the distance of
vehicles approaching from
behind.
YOUR 406 IN DETAIL
140

29-07-2002
Automatic day/night interior mirror
This automatically and gradually changes between the day and night positions.
To prevent dazzling, the glass of the mirror darkens automatically depending on
the intensity of the light from behind. It clears as the li ght (headlamps of follow
ing vehicles, sunlight) decreases, ensuring maximum visibility.
Operation
Switch on the ignition and press switch 1:
– Indicator light 2lit (switch pressed): automatic operation.
– Indicator light 2off: automatic system off. The mirror remains at its most clear.
Special feature
To ensure maximum visibility during manoeuvres, the mirror clears automat ical
ly when reverse gear is engaged.
YOUR 406 IN DETAIL 141
Areas for toll cards /
car park tickets
The athermic windscreen has two
nonreflective zones located either
side of the base of the interior
mirror.
They are intended for affixing toll
cards and/or car park tickets.
Manual interior mirror
The interior mirror has two positions:
–
day (normal),
– night (antidazzle).
To change from one to the other,
push or pull the lever on the lower
edge of the mirror.

29-07-2002
HORN
Press one of the spokes or
the centre of the steering
wheel.
Adjusting the headlamps
Depending on the load in your vehi
cle, adjusting the beam of the head
lamps is recommended as follows.0 1 or 2 people in the front seats.
– 3 people.
1 5 people.
2 5 people + maximum
authorised load.
3 Driver + maximum
authorised load.
Initial setting is position 0. Hazard warning lights
Press the button, the direction indi
cators flash.
They can operate with the ignition
off.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
When the vehicle is stationary,
unlock the steering wheel by pulling
handle
A.
Adjust the height and depth of the
steering wheel, then lock it by push
ing handle Adown fully.
YOUR 406 IN DETAIL
142
Automatic lighting of hazard
warning lights*
When braking in an emergency,
depending on the force of decelera
tion, the hazard warning lights come
on automatically. They switch off
automatically the first time you accel
erate.
It is also possible to switch them off
by pressing the button.* According to destination.

29-07-2002
Sun visor with illuminated
courtesy mirror
With the ignition on, the mirror is
automatically lit up when the flap is
opened.COURTESY LIGHTSOff.
On when one of the doors is opened.
Permanently on when the ignition key is in the accessories positi on or
the ignition is on.
1 Front courtesy light.
2 Rear courtesy light.
3 Mapreading lights. With the key in the accessories position or the ignition on, operate the rele
vant switch. YOUR 406 IN DETAIL
143

29-07-2002
5. Rear ashtrayRelease to empty, by pulling it sharply towards you.
To refit the ashtray, push it into its housing.
CENTRE CONSOLE Rear shelf compartment
This is provided for the storage of a
first aid kit.
The catch on the lid is designed to
withstand a weight of 9lbs (4 kg) on
impact.
Rear screen sun blind
Pull the blind by the central tab, and
then position the hooks in the slots
A.
2. Lighter
Push in and wait a few moments until it springs out automati cally.
1. Front ashtray
Press the cover to open the ashtray.
To empty it, after opening, push the cover forwards.
3. Coin storage
4. Cup holder YOUR 406 IN DETAIL
144

29-07-2002
Luggage cover (estate)
Pull the luggage cover towards you with both hands and position it in the notches A.
Guide the luggage cover back when closing it. Storage compartments
There are two storage compartments
located behind the boot side trim.
To gain access to a compartment,
pull the handle towards you and free
the panel by moving it upwards.
Rear parcel shelf
To remove:
turn control B, raise the rear of the shelf and remove it by pulling it
towards you.
To refit: insert the front part in the notches Cthen fold down the rear part.
Light
The boot light works when the boot is opened.
Luggage retaining net
This keeps your luggage in position. YOUR 406 IN DETAIL
145

29-07-2002
DRIVING YOUR 406
146
THE AUTOMATIC AUTOADAPTIVE GEARBOX
The
4gear automatic gearbox provides the comfort of integral automatic reg
ulation, enhanced by a sport programme (switchA) and a snow programme
(switch B).
Gear selection gate
– Move the lever in the gate to select one of the functions. Once the position has
been selected, the indicator light for that function is di splayed on the
instrument panel.
P ark (parking): for immobilisingthe vehicle and for startingthe engine, with the
handbrake on or off.
R everse: to drive in reverse gear(select this position when the vehicle is
stationary, engine at idle).
N eutral: for starting the engine and forparking, with the handbrake on.
D rive: to drive in autoadaptive mode (with automatic changing of the four
gears).
3 : for urban driving or for driving on winding roads(automatic changing of the
first three gears only).
2 : for mountain roads or for towing a trailer (automatic changing of the first
two gears only).
1 : for tackling steep gradients (selection of first gear only).
Special feature of the gearbox (1.8 and 2 litre petrol engi nes, 2 litre turbo
diesel HDI engine)
Selection of first gear is by pressing switch C, with the lever in position 2.
To change out of first gear, press switch Cagain or move the selector lever.
V6 Engine
1.8 litre and 2 litre petrol
engines, 2 litre turbo diesel
HDI engine