Peugeot 406 2002.5 Workshop Manual

29-07-2002
Manual station searchPress the "MAN" button.
Briefly press button Kor Lto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press button B for more than two seconds, to automatically store the 6 station s with the strongest signal in
FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.
The list of the 6 stations stored in memory on the waveband i s displayed each time one of the buttons "1" to " 6" is pressed.
YOUR 406 IN DETAIL 77

RDS
Using the RDS (Radio Data System) function on FMRadio Data System allows you to continue listening to the sa me station, whatever frequency it is using for the
region you are going through.
Briefly press the " RDS" button to switch the function on or off;
the display will show: "RDS" if the function is selected.
"(RDS)" if the function is selected but not available.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA" button to switch the function on or off.
The display will show: " TA " if the function is selected,
"(TA)" if the function is selected but not available.
Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD changer).
If you wish to interrupt a message, press the " TA" button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are
broadcast.
YOUR 406 IN DETAIL
78
29-07-2002

Regional following modeWhen they are part of a network, certain stations broadcast regi onal programmes in the various areas they
serve. With regional following mode you can keep listening t o the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.
PTY function This allows you to listen to stations broadcasting a specific t ype of programme (news, culture, sport, rock
etc.).
With FM selected, press the " TA" button for two seconds to switch this function on or off.
To search for a PTYprogramme:
select the PTYfunction,
briefly press button Kor Lto scroll down the list of the various types of pro
grammes offered.
when the programme of your choice is displayed, keep button Kor Lpressed for two seconds to carry out an automatic
search (after an automatic search the PTYfunction is switched off).
In PTY mode the different types of programmes can be stored in the
memory. To do this, press the preselection buttons " 1" to " 6" for more
than two seconds.
To recall the type of programme stored in the memory, briefly press
the corresponding button.
EON system
This connects stations which are part of the same network. It en ables the broadcast of traffic information by a station, which
is part of the same network as the station to which you are li stening.
This service is available when you have selected the TA traffic i nformation programme or the PTYfunction.
YOUR 406 IN DETAIL 79
29-07-2002

29-07-2002
CASSETTE
Selecting cassette modeWhen a cassette is inserted, the cassette player will start auto matically.
If a cassette is already inserted, press button C.
Ejecting the cassette Press button Eto eject the cassette from the player.
Direction of play
The player will play sides 1 and 2 of the cassette alternate ly, by automatically reversing the direction of play at the en d of a
side. To manually reverse the direction of play, press button C.
Selecting a track on a cassette (blank search) Press button Kto select the next track.
Press button Lto return to the start of the current track or to select the previ ous
track.
Fast forward/rewind
Fully press button K or Lto fast forward or rewind the cassette. At the end of the fa st forward/rewind, the set plays the cur
rent side.
Noise reduction (Dolby B NR system)
Press button Cfor more than two seconds to switch the function on or off.
Dolby noise reduction manufactured under licence from Dolby Labo ratories Licensing Corporation.
Dolby and the double D symbol are trademarks of Dolby Laboratori es Licensing Corporation.
Recommendations concerning the use of cassettes
Use good quality cassettes.
Avoid using cassettes which play for longer than 90 minutes.
Never expose the cassettes to heat or direct sunlight.
Retension the tape if necessary before inserting it into th e player.
Clean the playing heads regularly with a humid type cleani ng tape.
YOUR 406 IN DETAIL
80

29-07-2002
YOUR 406 IN DETAIL81
CD CHANGER
Selecting CD changer mode Press button D.
Selecting a disc Press buttons "1" to " 6" to select the corresponding disc.
Selecting a track Press button Kto select the next track.
Press button Lto return to the start of the current track or to select the previ ous
track.
Accelerated play
Press and hold button Kor Lfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Shuffle When the CD changer is selected, keep button " D" pressed for two seconds. The tracks will be played in
random sequence. Pressing button " D" again for two seconds returns you to normal play.

29-07-2002
406 Saloon AUDIO SYSTEM (RM2)
Presentation
Your 406 saloon is fitted with a JBL Audio HiFi system, designed specifically for the passenger compartment.
At the heart of the system, a 240 watt multifunction amplifier (1) (located in the boot) independently controls 10 high
acoustic definition speakers.
These speakers provide optimal reproduction and distri bution of the sound in the vehicle, both in the front and th e
rear.
The speakers are situated:
– in the fascia: two Micro Tweeters (3) set into two Mediums (4) for reproduction of the sound in the front.
– in the front doors: two Woofers (2) for reproduction of bass frequencies in the front.
– on the rear parcel shelf: two Tweeters (5) for reproduction of treble (high frequencies) in the rear are set into two ellipti
cal speakers (6), which are adjusted to reproduce a very wide range of bass and u ltrabass frequencies throughout the
whole of the passenger compartment. You will appreciate the clarity and depth and notice that th e sound fills the
whole of the vehicle perfectly.
Adjusting in CD mode
The basic functions remain those of the audio set.
There is no need for any further adjustment. However, in orde r to take
full advantage of your JBL audio system, you are advised to set th e
AUDIO functions (BASS, TREB, FAD, BAL) to position "0"(zero) and
the Loudness (LOUD)to the "ON"position.
YOUR 406 IN DETAIL
82

29-07-2002
YOUR 406 IN DETAIL83
406 Estate AUDIO SYSTEM (RM2)
Presentation
Your 406 estate is fitted with a JBL Audio HiFi system, designe d specifically for the passenger compartment..
At the heart of the system, a 180 watt multifunction amplifier (1) (located in the boot) independently controls 10 high
acoustic definition speakers.
These speakers provide optimal reproduction and distri bution of the sound in the vehicle, both in the front and th e
rear.
The speakers are situated:
– in the fascia: two Micro Tweeters (3) set into two Mediums (4) for reproduction of the sound in the front.
– in the front doors: two Woofers (2) for reproduction of bass frequencies in the front.
– on the boot pillar: two Micro Tweeters (5) for reproduction of treble (high frequencies), set into two Mediums (6)giving
uniform sound reproduction throughout the whole of the vehi cle.
Adjusting in CD mode
The basic functions remain those of the audio set.
There is no need for any further adjustment. However, in ord er to take
full advantage of your JBL audio system, you are advised to set th e
AUDIO functions (BASS, TREB, FAD, BAL) to position "0"(zero) and
the Loudness (LOUD)to the "ON"position.

29-07-2002
YOUR 406 IN DETAIL
84
Angle your aerial, following
the line of the windscreen.Recommended angle for
the aerial (saloon)
AUDIO RD3
1 – Press (behind)
2 – Press (behind) Function
Increase volume
Decrease volume
1+2 – Simultaneous
press
3 – Press Cutting off the sound (mute); restoring the sound
by pressing any button
Automatic search of higher frequencies (radio)
Selection of next track (CD)
4 – Press Automatic search of lower frequencies (radio)
Selection of previous track (CD)
5 – Press the end Source selection (radio/CD/CD changer)
6 – Rotation
(anticlockwise) Selection of higher frequency station stored in
memory (radio) Selection of next CD (CD changer)
7 –Rotation
(anticlockwise) Selection of lower frequency station stored in
memory (radio) Selection of previous CD
(CD changer)
Movement

29-07-2002
ButtonFunction
A ON/VOL Radio on/off.Adjustment of volume
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Source selection: CD.
Press for more than 2 seconds: shuffle.
D Source selection: CD changer.
Press for more than 2 seconds: shuffle.
EEjection of the CD.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
HIncrease bass/treble setting.
IDecrease bass/treble setting.
J AUDIO Setting of bass, treble, loudness, sound distribution
and automatic volume correction.
K
Automatic search of higher frequency.
Selection of next CD track.
L
Automatic search of lower frequency.
Selection of previous CD track.
M MAN Manual/automatic operation of buttons K and L.
1 to 6 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD in the CD changer.
YOUR 406 IN DETAIL 85

29-07-2002
GENERAL FUNCTIONS
On/offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
ANTITHEFT SYSTEM
The audio system is coded in such a way that it can operate on ly on your vehicle. It would not function if fitted to another vehicle.
The antitheft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume
Turn button Ato increase or decrease the volume of the set.
Note: If you have a telephone fitted with a "mute"signal output connected to the set, the set will automati
cally change to " mute" when the telephone is used.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS),treble(TREB), loudness (LOUD), fader
(FAD) , balance (BAL)and the automatic volume correction (CAV).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
" AUDIO " button after configuration of the automatic volume correction .
Note: the bass and treble settings are specific to each source. It is p ossible to set them differently for radio,
CD, or CD changer.
YOUR 406 IN DETAIL
86