warning Peugeot Boxer 2010 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: Boxer, Model: Peugeot Boxer 2010Pages: 167, PDF Size: 4.33 MB
Page 29 of 167
Instruments and controls
Warning
lamp is indicates Solution - action
Direction
i n d i c a t o r s f l a s h i n g w i t h
buzzer. a c h a n g e o f d i r e c t i o n u s i n g t h e
l i g h t i n g s t a l k , t o t h e l e f t o f t h e
s t e e r i n g w h e e l . T o t h e R i g h t : p r e s s t h e s t a l k u p w a r d s .
T o t h e L e f t : p r e s s t h e s t a l k d o w n w a r d s .
F r o n t f o g l a m p s
on. that the button on the centre
c o n s o l e h a s b e e n p r e s s e d . Manual selection.
T h e f o g l a m p s o n l y o p e r a t e i f t h e s i d e l a m p s o r d i p p e
d
b e a m h e a d l a m p s a r e o n .
R e a r f o g l a m p s on. that the button on the centre
c o n s o l e h a s b e e n p r e s s e d . M a n u a l s e l e c t i o n . T h e f o g l a m p s o n l y o p e r a t e i f t h e
s i d e l a m p s o r d i p p e d b e a m h e a d l a m p s a r e o n . W h e n
v i s i b i l i t y i s n o r m a l , p l e a s e s w i t c h t h e f o g l a m p s o f f .
C r u i s e c o n t r o l on. that the cruise control has been
s e l e c t e d . Manual selection.
R e f e r t o t h e " S t e e r i n g m o u n t e d c o n t r o l s " s e c t i o n o f
c h a p t e r 3 .
F a u l t y b u l b o n a c c o m p a n i e d
by a message
on the screen. that one or more bulbs have
b l o w n . H a v e t h e b u l b c h a n g e d .
R e f e r t o t h e " C h a n g i n g a b u l b " s e c t i o n o f c h a p t e r 8
o r
c o n t a c t a P E U G E O T d e a l e r .
Rear parking
sensors on.
f a i l u r e o f t h e s y s t e m . T h e a u d i b l e a s s i s t a n c e i s n o l o n g e r a c t i v e .
H a v e t h e s y s t e m c h e c k e d b y a P E U G E O T d e a l e r
w i t h o u t d e l a y .
Page 31 of 167
3 4
Instruments and controls
FUEL GAUGE
T h e f u e l l e v e l i s t e s t e d e a c h t i m e t h e k e y i s
t u r n e d t o t h e " r u n n i n g " p o s i t i o n .
T h e g a u g e i s p o s i t i o n e d o n :
- F (Full): t h e f u e l t a n k i s f u l l ,
a p p r o x i m a t e l y 9 0 l i t r e s .
- E (Empty): t h e r e s e r v e i s n o w b e i n g
u s e d , t h e w a r n i n g l a m p c o m e s o n
continuously.
T h e r e s e r v e w h e n t h e w a r n i n g f i r s t c o m e s
o n i s a p p r o x i m a t e l y 1 1 l i t r e s .
F u e l t a n k s o f d i f f e r e n t c a p a c i t i e s ( 6 0 a n d
1 2 5 l i t r e s ) a r e a v a i l a b l e a s a n o p t i o n .
COOLANT TEMPERATURE
The needle is positioned between
C (Cold) and H (Hot): normal operation.
I n a r d u o u s c o n d i t i o n s o f u s e o r h o t c l i m a t i c
c o n d i t i o n s , t h e n e e d l e m a y m o v e c l o s e t o
t h e r e d g r a d u a t i o n s . - w a i t f o r t h e e n g i n e t o c o o l d o w n i n
o r d e r t o c h e c k t h e l e v e l a n d t o p i t u p i f
n e c e s s a r y . F o l l o w t h i s a d v i c e :
t h e c o o l i n g s y s t e m i s p r e s s u r i s e d . I n
o r d e r t o a v o i d a n y r i s k o f s c a l d i n g ,
u n s c r e w t h e c a p b y t w o t u r n s t o a l l o w
t h e p r e s s u r e t o d r o p .
W h e n t h e p r e s s u r e h a s d r o p p e d , c h e c k t h e
l e v e l a n d r e m o v e t h e c a p t o t o p u p .
I f t h e n e e d l e r e m a i n s i n t h e r e d z o n e ,
c o n t a c t a P E U G E O T d e a l e r .
R e f e r t o t h e " L e v e l s " s e c t i o n o f c h a p t e r 7 .
R e f e r t o t h e " F u e l " s e c t i o n o f c h a p t e r 7 .
What you should do if the needle enters the
red zone, or if the warning
lamp
comes on:
- s t o p i m m e d i a t e l y , s w i t c h o f f t h e i g n i t i o n . T h e f a n m a y c o n t i n u e t o o p e r a t e f o r
a c e r t a i n t i m e u p t o a p p r o x i m a t e l y
10 minutes.
EMISSION CONTROL
E O B D ( E u r o p e a n O n B o a r d D i a g n o s i s ) i s
a d i a g n o s t i c s s y s t e m w h i c h c o m p l i e s w i t h ,
a m o n g o t h e r s , t h e s t a n d a r d s c o n c e r n i n g
a u t h o r i s e d e m i s s i o n s o f :
- C O ( c a r b o n m o n o x i d e ) ,
- H C ( u n b u r n t h y d r o c a r b o n s ) ,
- N O x ( n i t r o g e n o x i d e s ) o r p a r t i c l e s , d e t e c t e d b y o x y g e n s e n s o r s p l a c e d
u p s t r e a m a n d d o w n s t r e a m o f t h e
catalytic converters.
T h e r e f o r e , t h e d r i v e r i s w a r n e d o f a n y
m a l f u n c t i o n o f t h i s e m i s s i o n c o n t r o l
s y s t e m b y t h e l i g h t i n g o f t h i s s p e c i fi c
w a r n i n g l a m p o n t h e i n s t r u m e n t p a n e l .
T h e r e i s a r i s k o f d a m a g e t o t h e c a t a l y t i c
c o n v e r t e r . H a v e i t c h e c k e d b y a P E U G E O T
d e a l e r .
Page 34 of 167
3 7
2
READY TO SET OFF
Starting and stopping
STARTING AND STOPPING
MAR p o s i t i o n : r u n n i n g .
C e r t a i n a c c e s s o r i e s c a n b e u s e d .
AVV p o s i t i o n : s t a r t e r .
T h e s t a r t e r i s o p e r a t e d .
STOP p o s i t i o n : s t e e r i n g l o c k .
T h e i g n i t i o n i s o f f .
Good practice when starting
Engine immobiliser warning
lamp
I f t h i s c o m e s o n , u s e a n o t h e r k e y
a n d h a v e t h e f a u l t y k e y c h e c k e d
b y a P E U G E O T d e a l e r .
Diesel pre-heating warning
lamp
Turn the key to the MAR position.
I n c o l d w e a t h e r , w a i t f o r t h i s
w a r n i n g l a m p t o s w i t c h o f f t h e n o p e r a t e t h e
s t a r t e r ( AVV p o s i t i o n ) u n t i l t h e e n g i n e s t a r t s .
I f t h e t e m p e r a t u r e i s h i g h e n o u g h , t h e
w a r n i n g l a m p c o m e s o n f o r l e s s t h a n o n e
s e c o n d , y o u c a n s t a r t w i t h o u t w a i t i n g . Door or bonnet open warning
lamp
I f t h i s c o m e s o n , a d o o r o r t h e b o n n e t
i s n o t c l o s e d c o r r e c t l y , c h e c k !
Good practice when stopping
Minimise engine and gearbox wear
W h e n s w i t c h i n g o f f t h e i g n i t i o n , l e t t h e
e n g i n e t o i d l e f o r a f e w s e c o n d s t o a l l o w t h e
t u r b o c h a r g e r t o s l o w d o w n .
D o n o t p r e s s t h e a c c e l e r a t o r w h e n s w i t c h i n g
o f f t h e i g n i t i o n .
T h e r e i s n o n e e d t o e n g a g e a g e a r a f t e r
parking the vehicle.
In low temperatures
I n m o u n t a i n o u s a n d / o r c o l d a r e a s , i t i s
a d v i s a b l e t o u s e a " w i n t e r " t y p e f u e l s u i t e d
t o l o w o r m i n u s t e m p e r a t u r e s .
Page 40 of 167
42
Steering mounted controls
HEADLAMP BEAM
You are advised to adjust the height of
the headlamp beams in accordance with
the load in your vehicle.
This function works in the dipped and main
beam headlamps position. Press these controls, located
on the dashboard, several times
in succession to adjust the
headlamps.
An indicator lamp on the screen
indicates the adjustment position
selected (0, 1, 2, 3).
SIDE/PARKING LAMPS
This system enables you to leave the
sidelamps on when parked; with the
ignition off, key in the STOP position or key
removed.
Move the ring on the lighting stalk to
position O then to sidelamps, dipped or main
beam headlamps.
The warning
lamp
on the
instrument panel comes on.
The sidelamps will remain on
while you are parked.
Leaving the lighting on for long periods
may significantly reduce the charge of your
vehicle's battery.
Page 73 of 167
75
4
TECHNOLOGY ON BOARD
Mode
Menu... Press... Sub-menu… Press... Select…
Confirm
and exit
Enables you to...
8 Measurement
unit (Unit)
Distance
Km
Select the distance display unit.
Miles
Consumption km/l
Select the fuel consumption
display unit.
l/100 km
9 Languages
List of
languages
available
Select the display language.
10
Volume of
announcements
(Buzz)
Increase
Increase/decrease the volume
of the announcements or of the
audible warning signal.
Decrease
11 Volume of
the buttons
Increase Increase/decrease the volume of
the buttons.
Decrease
12 Service
Service
(Km/miles before
oil change)
Display the kilometres/miles
remaining before the next oil
change.
Oil Display the oil level.
13 Passenger
airbag
(BAG P)
ON
Yes
Activate the passenger airbag.
No
OFF Yes
Deactivate the passenger airbag.
No
14 Exit from
menu
Exit from the menu. Press the
arrow at the bottom to go to the
first menu.
Page 74 of 167
kmC I T Y
Parking sensors
76
AUDIBLE REAR PARKING SENSORS
If fitted on your vehicle, the system consists
of four proximity sensors, installed in the
rear bumper.
They detect any obstacle: person, vehicle,
tree, fence, behind the vehicle during the
manoeuvre.
However, objects the size or thickness of
which are detected at the beginning of the
manoeuvre will no longer be detected at the
end of the manoeuvre: blind spots between
and below the sensors. Examples: stake,
roadworks cone or pavement post. Engage reverse gear
The proximity information is indicated by an
audible signal which becomes more rapid as
the vehicle approaches the obstacle.
When the distance between the rear of
the vehicle and the obstacle is less than
approximately thirty centimetres, the audible
signal becomes continuous.
The system cannot, in any circumstances,
take the place of the vigilance and
responsibility of the driver.
Stop the assistance
Change to neutral.
Operating fault
If this warning lamp comes on on
the instrument panel, contact a
PEUGEOT dealer. If your vehicle is fitted
with this screen, a
message appears.
Good practice
In bad weather or in winter, ensure that the
sensors are not covered with mud, ice or
snow.
Page 77 of 167
79
4
TECHNOLOGY ON BOARD
Pneumatic suspension
PNEUMATIC SUSPENSION
If your vehicle is fitted with pneumatic
suspension, you can adjust the height of
the rear of the vehicle to make loading and
unloading easier.
The control panel is located on the
dashboard.
There is a nominal level as well as 6 height
adjustment levels, raising (from +1 to +3) or
lowering (from -1 to -3). Each level reached
is indicated on the instrument panel screen.
Manual adjustment of the loading height
Raise: upwards adjustment of
the load floor Press the control, release to
stop the movement. Each press
increases by one level: +1 to +3.
Lower: downwards adjustment
of the load floor Press the control, release to stop
the movement.
Each press decreases by one
level: -1 to -3. Return to the optimum floor height
Press the same number of times in reverse
as the level of the position displayed.
Warning lamp
Refer to the "Instruments and controls"
section of chapter 2.
Good practice
Driving with the suspension set too high or
too low risks damaging components under
the body.
You must avoid using this control in the
following circumstances:
- when working underneath the vehicle,
- when changing a wheel,
- when the vehicle is being transported by lorry, train, ferry, boat, ...
Page 100 of 167
102
Driving safely
DRIVING SAFELY
PARKING BRAKE HAZARD WARNING LAMPS
Press this button, the direction indicators
flash.
They can operate with the ignition off.
The hazard warning lamps should only be
used in dangerous situations, when stopping
in an emergency or when driving in unusual
conditions.
Applying
Pull the parking brake lever up to immobilise
your vehicle.
Check that the parking brake is applied
firmly before leaving the vehicle. If the parking brake is still on or has
not been released properly, this is
indicated by this warning lamp which
comes on on the instrument panel.
When parking on a slope, direct your wheels
towards the pavement and pull the parking
brake lever up.
There is no advantage in engaging a gear
after parking the vehicle, particularly if the
vehicle is loaded.
Releasing
Pull the lever and press the button to lower
the parking brake lever.
Page 101 of 167
103
5
Driving safely
SAFETY
HORN
Press the centre of the steering wheel.
ANTI-LOCK BRAKING SYSTEM(ABS - EBFD)
The ABS and EBFD (electronic brake force
distribution) systems improve the stability
and manoeuvrability of your vehicle on
braking, in particular on poor or slippery
surfaces.
The ABS prevents locking of the wheels, the
EBFD provides full control of the braking
pressure wheel by wheel.
EMERGENCY BRAKING ASSISTANCE SYSTEM (EBA)
In an emergency, this system enables the
optimum braking pressure to be reached
more quickly, press the pedal firmly without
releasing it.
It is triggered by the speed at which the
brake pedal is activated.
This alters the resistance of the brake pedal
under your foot.
To prolong the operation of the emergency
braking assistance system: keep your foot
on the brake pedal.
Good practice
The anti-lock braking system comes into
operation automatically when there is a risk
of wheel lock. It does not reduce the braking
distance.
On very slippery surfaces (ice, oil, etc...)
the ABS may increase the braking distance.
When braking in an emergency, do not
hesitate to press the brake pedal firmly,
without releasing the pressure, even on a
slippery surface, you will then be able to
continue to steer the vehicle to avoid an
obstacle.
Normal operation of the ABS may be felt by
slight vibration of the brake pedal.
When changing wheels (tyres and rims),
ensure that these are approved.
If this warning lamp comes on,
it indicates a malfunction of the
ABS which could result in a
loss of control of the vehicle on
braking.
If this warning lamp comes on,
together with the brake warning
lamp, it indicates a malfunction of
the electronic brake force distribution
which could result in a loss of control
of the vehicle on braking.
Stop immediately.
In both cases, contact a PEUGEOT dealer.
Page 102 of 167
104
Driving safely
TRACTION CONTROL (ASR) AND DYNAMIC STABILITY CONTROL (ESP)
These systems are linked and complement
the ABS.
The ASR system is very useful for
maintaining optimum drive and avoiding
losses of control of the vehicle on
acceleration.
The system optimises drive to prevent the
wheels skidding, by acting on the brakes of
the drive wheels and on the engine. It also
allows the directional stability of the vehicle
to be improved on acceleration.
Use the ESP to hold your course without
attempting to countersteer. If there is a variation between the trajectory
followed by the vehicle and that required
by the driver, the ESP system automatically
acts on the engine and the brake of one
or more wheels, in order to put the vehicle
back on course.
In certain exceptional conditions (when
starting a vehicle stuck in mud or snow, or
on loose ground...), it could prove useful
to deactivate the ASR system to make the
wheels spin and regain grip.
Operation of the ASR and ESP systems
The LED flashes when the ASR
or ESP is triggered.
Press this button.
The LED on the button comes on: the
ASR system no longer acts on the engine
operation, but continues to act on the brakes.
Operating fault
When a malfunction of the ASR
system occurs, this warning lamp
comes on, accompanied by an
audible signal and confirmed by a
message on the screen.