jump start terminals PEUGEOT BOXER 2021 Owners Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2021, Model line: BOXER, Model: PEUGEOT BOXER 2021Pages: 212, PDF Size: 6.37 MB
Page 133 of 212

131
In the event of a breakdown
8Disconnecting the battery 
 
► Tilt lever 1 downwards to release the 
terminals.
► 
Remove terminals
  
2
  from the negative (-) 
terminal.
Wait approximately 6 minutes after 
switching off the ignition before 
disconnecting the battery.
Do not disconnect the terminals while the 
engine is running.
Do not charge a battery without disconnecting 
the terminals first.
Close the windows and the doors before 
disconnecting the battery.
After reconnecting the battery, turn on the 
ignition and wait 1   minute before starting the 
engine, to enable the electronic systems to 
initialise. If minor problems nevertheless persist 
following this operation, contact a PEUGEOT 
dealer or a qualified workshop.
It is recommended to disconnect the (-) 
terminal of the battery   if the vehicle is to 
be left unused for more than one month.
The description of the battery charging 
procedure is only indicative.
After prolonged battery disconnection, it may be 
necessary to reinitialise the following functions:
–
 
the display parameters (date, time, language, 
distance and temperature units),
–
 
the stations of the audio system,
–
 
the central locking.
Some settings are cancelled and must be 
entered once again; contact a PEUGEOT
 dealer.
If the vehicle is equipped with a tachograph or 
an alarm,
  it is recommended that the (-) terminal 
of the battery (located under the floor on the 
left-hand side, in the cab) be disconnected if the 
vehicle is not going to be used for more than 5 
days.
Starting using another 
battery
Never start the engine by connecting a 
battery charger.
Never use a 24 V or higher battery booster.
Check beforehand that the backup battery 
has a nominal voltage of 12 V and a capacity 
at least equal to that of the discharged 
battery.
The two vehicles must not be in contact with 
each other.
Switch off all electricity-consuming equipment 
on both vehicles (audio system, wipers, 
lighting, etc.).
Make sure that the jump leads are well away 
from the engine’s moving parts (fan, belt, 
etc.).
Do not disconnect the (+) terminal while the 
engine is running.
Starting the engine using another battery is to be 
performed inside the engine compartment.
►
 
Open the bonnet. 
 
A. Positive metallic terminal on the vehicle
B. Backup battery
C. Vehicle earth point
The positive metallic terminal  A is accessible 
through a flap located on the side of the fuse 
box.