wiring Peugeot Partner VU 2001 Owner's Manual

76
Radio connections
To gain access to the wiring and connectors in order to connect a radio and fascia speakers, open the radio cover flap by pressing on the centreand bottom of the flap. The wiring is designed so that power can be supplied to either of the locations 1or 2.
The radio can be fitted in either of locations
1or 2.
Standard connector positionsA1 :Ð
A2 :Ð
A3 :Ð
A4 :(+) Permanent
A5 :Ð
A6 :(+) Rheostat
A7 :(+) Accessories
A8 : Earth
B1 : (+)
B2 :(Ð)
B3 :(+) Front right speaker
B4 :(Ð) Front right speaker
B5 :(+) Front left speaker
B6 :(Ð) Front left speaker
B7 : (+)
B8 :(Ð)
Fitting speakers
A speaker location is provided at each end of the fascia. Unclip and pull out the grille, connect the speakers, secure them by screwing them intoposition, replace the grille. The speakers for this vehicle are of a specific height, contact an approved
dealer.
Diameter of the fascia speakers: 100 mm / 35 mm (Tweeter).
TO FIT SPEAKERS WITH A DIAMETER OF 165 MM (COVER DIAMETER
OF 100 MM) IN THE FRONT DOORS. Aerial. For good reception the aerial should be set at the same angle as the slope of the windscreen.
RADIO FITTINGIV-4
1
2