Peugeot RCZ 2015 Owner's Manual

07
239
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RAdIO
Press "RAdIO".
dAB (digital Audio Broadcasting)
d
igital radio
Digital radio provides a higher quality reception and also the graphical display of information for the radio station, by selecting
"V
ideo mode" in "Radio favourites" (Options).
The different radio multiplex services offer a choice of stations
displayed in alphabetical order.
Select "Change band"
and confirm.
Selection "
d

AB" and confirm.
digital radio - dAB/FM auto tracking
"DAB" does not have 100% coverage of the country.
When the digital signal is weak, "DAB / FM auto tracking" allows you
to continue listening to the same station, by automatically switching
to the corresponding analogue "FM" station (if one exists).
Change of station in the same "multiplex".
Manual search for a "multiplex". Press "RA
d IO".
Select "Options "
and confirm.
Select "FM/
d AB" and confirm.
If "DAB
/ FM auto tracking" is on, there will be a difference of a few
seconds in the programme when the system changes to analogue
"FM" radio with sometimes a variation in volume.
Display of the "DAB" band then becomes "DAB (FM)".
When the strength of the digital signal is good again, the system
automatically switches back to "DAB".
If the "DAB" station you are listening to is not available on "FM"
("
d AB/FM" option greyed out), or if "DAB / FM auto tracking" is not
on, the sound will be cut when the digital signal is too weak.

08
240
RCZ_en_Chap10b_RT6-2-8_ed01-2015
"MEdIA"
" Change media"
"Eject USB device" (if USB
connected)
"Play mode" ("Normal",
"Random", "Random on all
media", "Repetition")
"Audio settings "
"Activate /
d

eactivate AUX input"
List of the current media
tracks.
Go from the list to the menu (left/right).or
Press MUSIC.
MUSIC MEdIA
PLAYERS
Access to the "MUSIC MEdIA PLAYER" menu

08
241
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Cd, MP3 Cd / USB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg and .mp3" file extensions and with a bit rate of between 32 Kbps
and 320 Kbps.
It also supports VBR (V

ariable Bit Rate) mode.
No
other type of file (.mp4, .m3u...) can be played.
WMA


files must be of the standard wma 9 type.
The sampling rates supported are greater than 32 KHz.
It
is advisable to restrict file names to 20 characters, without using of
special characters (e.g.: " " ? ; ù) to avoid any playing and displ\
aying
problems.
In order to be able to play a recorded CDR or CDR

W, when recording
it is preferable to select the ISO 9660 level 1, 2 or
j oliet standard.
If the disc is recorded in another format (udf,
...), it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for
optimum sound quality.
In the particular case of a multi-session CD, the
j oliet standard is
recommended. Information and advice
The system supports USB mass storage or iPod
devices via the USB port (suitable cable not supplied).
If a partitioned USB memory key is connected to the
system,
only the first partition is recognised.
Control of the peripheral device is with the audio
system controls.
The number of tracks is limited to 2000 maximum,
999 tracks per folder.
If the current consumption at the USB port exceeds
500 mA, the system goes into protection mode and
deactivates the port.
Other peripherals, not recognised on connection, must
be connected to the auxiliary socket using a
j ack cable
(not supplied).
Use only USB memory sticks formatted FAT32 (File Allocation Table).
The system does not support the operation of an Apple
® player and a
USB memory stick connected at the same time.
It

is

recommended

that

official

Apple® USB cables are used to ensure
correct operation.
MUSIC MEdIA PLAYERS

08
242
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Insert the CD in the player, insert the USB
memory stick in the USB player or connect the
USB peripheral to the USB port using a suitable
cable (not supplied).
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce

the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched of

f or connection of a USB memory
stick. However, the system memorises these
lists
and if they are not modified, the loading
time will be shorter

.
Play starts automatically after a period which
depends on the capacity of the USB memory
stick. Selection of source
The SOURCE button on the steering mounted controls allows a
direct change to the next media source. "C d / C d MP3"
"USB, iPod "
"AUX"
"STREAMING"
"RA
d IO"
Press MUSIC to display the "ME
d IA"
menu.
Select "Following media source " and
confirm.
Repeat the operation as many times as necessary to obtain the
desired media source (except for radio which is accessible either
with SOURCE or RA
d IO).
Sources
MUSIC MEdIA
PLAYERS

08
/
// /
/ /
/
+
/
/
/
243
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Selecting a track
Previous track.
Next track.
Previous folder.
Next folder.
Fast forward.
Fast backward.
Pause: long press on SRC. MUSIC: List of USB or C
d tracks or
folders
Up or down in the list.
Confirm,
next menu level.
Up one menu level.
Long press
Long press
MUSIC MEdIA
PLAYERS

08
244
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's speakers.
Connect the telephone: refer to the "USING THE TELEPHONE"
section.
Select "
Audio" or "All" profile.
If play does not start automatically, it may be necessary to start the
audio playback from the telephone.
Control is from the peripheral device or by using the audio system
buttons.
Once connected in streaming mode, the telephone is considered to be
a media source.
It is recommended that you activate "Repeat" on the Bluetooth
peripheral.
MUSIC MEdIA PLAYERS
Connecting APPLE® players
Connect the Apple® player to the USB port using a suitable cable
(not

supplied).
Play starts automatically.
Control is via the audio system.
The

classifications

available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The


default

classification used is by artist.
T
o modify the classification
used,


return

to

the

first level of the menu then select the desired
classification


(playlists for example) and confirm to go down through
the menu to the desired track.
The


"Shuffle

tracks" mode on an iPod
® corresponds to the "Random"
mode on the audio system.
The

"Shuffle

albums"

mode

on

an

iPod
® corresponds to the "Random
all" on the audio system.
"Shuffle

tracks"

is

restored

by

default

on each connection.
The version of software in the audio system may not be compatible
with the generation of your Apple
® player.

08
245
RCZ_en_Chap10b_RT6-2-8_ed01-2015
MUSIC MEdIA PLAYERS
Using the auxiliary input (AUX)
j

ACK/USB audio cable not supplied
Connect the portable device (MP3, WMA player…)
to the j ACK auxiliary audio socket or USB port
using a suitable cable.
Press MUSIC to display the "MUSIC"
menu. Select "Activate /
d eactivate AUX
input " and confirm.
First adjust the volume of your portable
device (to a high level). Then adjust the
volume of your audio system.
Display and management of the controls are via the portable device.

09
246
RCZ_en_Chap10b_RT6-2-8_ed01-2015
AUdIO SETTINGS
They are accessible by the MUSIC
button in the control panel or by a long
press on RA
d IO according to the source
in use.
-

"Equalizer" (choice of 6 musical ambiences)
-

"Bass "
-

"Treble"
-

"Loudness" (Activate/Deactivate)
-

"
d
istribution " ("
d river", "All passengers")
-

"Le-Ri balance" (Left/Right)
-

"Fr-Re balance" (Front/Rear)
-

"Auto. Volume" depending on road speed (Activate/Deactivate) The audio settings (
Equalizer, Bass, Treble and Loudness) are
different and independent for each sound source.
The settings for distribution and balance are common to all sources.
The distribution (or spatialisation using the Arkamys
© system) of sound
is

an

audio

process

that

allows

the

audio

quality

to

be adapted to the number of listeners in the vehicle. On-board

audio: Arkamys
© Sound Staging optimises sound
distribution

in the the passenger compartment.

10
247
RCZ_en_Chap10b_RT6-2-8_ed01-2015
CONFIGURATION
Press SETUP to display the
"Configuration" menu. Select "Choose colour"
and confirm to
select the screen colour harmony and
the map presentation mode:
-

day mode,
- night mode,
-

automatic day/night mode,
according to whether the
headlamps are on.
Select "

Adjust luminosity"
and confirm
to adjust the screen brightness.
Press "

OK" to save the changes.
The settings for day and night are
independent.
Select "Display
configuration" and
confirm.
display configuration

11
248
RCZ_en_Chap10b_RT6-2-8_ed01-2015
SCREEN MENU MAP(S)
"Navigation - guidance"
MENU
Enter an address
Select destination
directory
GPS coordinates
journey leg and route
Add a stage Enter an address
Directory Previous destinations
Order/delete journey legs
d
ivert route
Chosen destination
Guidance options
Define calculation criteria
d

elete last destinations
Map management
Map orientation
MAIN FUNCTION
Option A1
Option A11
Option A
Option B...
Map details
Move the map
Mapping and updating
d
escription of risk areas database
Stop / Restore guidance
1
2
3
1
3
3
2
2
2
2
1
3
1
1
2
2
2
2
2
2
2
2
2
2
1
1
Set parameters for risk areas2
Fastest route2
Shortest route
d
istance/Time
With tolls2
2
2
With Ferry2
Traffic info2
Set speech synthesis Fastest route
Shortest route
3
3
2
Distance/Time
With tolls3
3
With Ferry
Traffic
info3
3
3
3
3
North directionVehicle direction
Perspective view