jacking points RENAULT KANGOO 1997 KC / 1.G General Information Workshop Manual

LIFTING
Trolley jack - Axle stands
AXLE STANDS
When putting the vehicle on axle stands, they
must be positioned:
_ either under the reinforcements provided for
lifting the vehicle with the tool kit jack,
- or under the studs located behind the
reinforcements.
Positioning of axle stands at the rear is carried out
by lifting the vehicle at the sides.
02
Safety symbol (special precautions to be taken when carrying out operations).
SPECIAL TOOLING REQUIRED
Cha. 280 -02 Adaptable cross piece for trolley jack
Cha. 408 -01
or Adaptable socket for trolley jack
Cha. 408 -02
If a trolley jack is used, appropriate axle
stands must always be used.
It is forbidden to lift the vehicle by supporting its
weight under the front suspension arms or under
the "V" member of the rear axle.
Depending on the type of trolley jack, use sockets
Cha. 408-01 or Cha. 408-02 for positioning the
cross piece Cha. 280-02.
To lift at the front or the rear of the vehicle, take
the weight under the side jacking points.
TROLLEY JACK AT THE SIDE
Use cross piece Cha. 280-02.
Take the weight under the valance at the level of
the front door.
Position the flange correctly in the groove of the
cross piece.
12333-2G
12274-1R
85679-1G15
02-1