weight RENAULT KANGOO 1997 KC / 1.G General Information Workshop Manual

SPECIFICATIONS
Vehicle identification
01
LOCATION OF VEHICLE IDENTIFICATION PLATE
e0-00/00-0000-000-000-00
VF000000000000000
0000 kg
0000 kg
1
- 0000 kg
2
- 0000 kg
000000000000000
RENAULT S.A.
1
2
3
4
5
8 7
6
9
10
13
12 11
1 Type mines of the vehicle and chassis number
2 PTMA [total all up weight of the vehicle]
3 PTR [maximum permitted total train weight -
vehicle loaded with trailer]
4 Maximum permitted weight on the front axle
(P.T.M.A. front axle)
5 Maximum permitted weight on the rear axle
(P.T.M.A. rear axle)6 Technical specifications of the vehicle
7 Paint reference
8 Equipment level
9 Vehicle type
10 Trim code
11 Additional factory optional equipment
12 Fabrication number
13 Interior matching trim code
13187R
01-2

LIFTING
Trolley jack - Axle stands
AXLE STANDS
When putting the vehicle on axle stands, they
must be positioned:
_ either under the reinforcements provided for
lifting the vehicle with the tool kit jack,
- or under the studs located behind the
reinforcements.
Positioning of axle stands at the rear is carried out
by lifting the vehicle at the sides.
02
Safety symbol (special precautions to be taken when carrying out operations).
SPECIAL TOOLING REQUIRED
Cha. 280 -02 Adaptable cross piece for trolley jack
Cha. 408 -01
or Adaptable socket for trolley jack
Cha. 408 -02
If a trolley jack is used, appropriate axle
stands must always be used.
It is forbidden to lift the vehicle by supporting its
weight under the front suspension arms or under
the "V" member of the rear axle.
Depending on the type of trolley jack, use sockets
Cha. 408-01 or Cha. 408-02 for positioning the
cross piece Cha. 280-02.
To lift at the front or the rear of the vehicle, take
the weight under the side jacking points.
TROLLEY JACK AT THE SIDE
Use cross piece Cha. 280-02.
Take the weight under the valance at the level of
the front door.
Position the flange correctly in the groove of the
cross piece.
12333-2G
12274-1R
85679-1G15
02-1