technical specifications RENAULT KANGOO 2013 X61 / 2.G Diesel DCM 1.2 Injection Workshop Manual

1Engine and peripherals
V1 MR-376-X76-13B000$TOC.mif
V1
13B
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V1
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s. 2013
DIESEL INJECTION
DCM 1.2 Injection
Program no.: 4C
Vdiag No.: 08
Fault finding – Introduction 13B - 2
Fault finding – Cleanliness guidelines 13B - 7
Fault finding – System operation 13B - 10
Fault finding – Replacement of components 13B - 17
Fault finding – Configurations and programming 13B - 21
Fault finding – Fault summary table 13B - 22
Fault finding – Interpretation of faults 13B - 25
Fault finding – Conformity check 13B - 119
Fault finding – Status summary table 13B - 135
Fault finding – Interpretation of statuses 13B - 136
Fault finding – Parameter summary table 13B - 141
Fault finding – Interpretation of parameters 13B - 143
Fault finding – Command summary table 13B - 145
Fault finding – Customer complaints 13B - 148
Fault finding – Fault Finding Chart 13B - 150
Fault finding – Tests 13B - 186