fuse box RENAULT KANGOO 2013 X61 / 2.G Lighting Workshop Manual

80D-4V1 MR-376-X76-80D000$020.mif
80D
UCH
Vdiag No.: 0F
Side lights:
The side lights are switched on directly using the lighting stalk, via the passenger compartment fuse and relay box.
This function lights all the side lights (front and rear) as well as the number plate lighting.
Dipped beam headlights:
The dipped beam headlights are switched on directly using the lighting stalk, via the passenger compartment fuse
and relay box.
This function lights only the two bulbs providing the dipped headlights function.
Main beam headlights:
The main beam headlights are switched on directly using the lighting stalk, via the passenger compartment fuse and
relay box.
This function lights only the two bulbs providing the main beam headlights function.
Rear fog light:
The rear fog light is switched on directly using the lighting stalk, via the passenger compartment fuse and relay box.
This function lights only the rear fog lights.
Hazard warning lights:
The "hazard warning lights illumination request" signal from the hazard warning lights switch is sent to the UCH,
which controls the hazard warning lights.
This function lights only the hazard warning lights. The UCH also manages the illumination of the hazard warning
lights in the event of impact detection.
Indicators:
The "left-hand or right-hand indicators illumination request" signal initiated by the driver using the lighting stalk is
sent to the UCH, which controls the left-hand and right-hand indicators.
LIGHTING
Fault finding – Role of components

80D-5V1 MR-376-X76-80D000$030.mif
80D
UCH
Vdiag No.: 0F
Indicator lights
• List of system components and associated component codes:
• Indicator lights diagram645Passenger compartment electrical control unit
260Passenger compartment fuse box and relay
125Hazard warning lights switch
172Rear right-hand light
173Rear left-hand light
255Front right-hand indicator light
256Front left-hand indicator light
267Right-hand repeater
268Left-hand repeater
209Lighting stalk
LIGHTING
Fault finding – Operating diagram

80D-6V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Side lights
• List of system components and associated component codes:
• Side lights diagram645Passenger compartment electrical control unit
260Passenger compartment fuse box and relay
166Right-hand number plate light
167Left-hand number plate light
172Rear right-hand light
173Rear left-hand light
184Right-hand side light
185Left hand side lights
209Lighting stalk
247Instrument panel

80D-7V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Main beam headlights
• List of system components and associated component codes:
• Main beam headlights diagram226Right hand headlight
227Left hand headlight
247Instrument panel
260Passenger compartment fuse box and relay
209Lighting stalk

80D-8V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Dipped headlights
• List of system components and associated component codes:
• Dipped beam headlights diagram260Passenger compartment fuse box and relay
226Right hand headlight
227Left hand headlight
247Instrument panel
537Left headlight corrective motor
538Right headlight corrective motor
209Lighting stalk

80D-9V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Front fog lights
• List of system components and associated component codes:
• Front fog lights diagram260Passenger compartment fuse box and relay
176Right-hand front fog light
177Left-hand front fog light
231Front fog relay
247Instrument panel
209Lighting stalk

80D-10V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Rear fog light
• List of system components and associated component codes:
• Rear fog light diagram260Passenger compartment fuse box and relay
173Rear left-hand light
247Instrument panel
209Lighting stalk

80D-16
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-80D000$080.mif
80D
UCH
Vdiag No.: 0F
ET484SIDE LIGHTS SIGNAL
NOTESThere must be no present or stored faults.
Move the side lights switch.
The status should be PRESENT and the side lights illuminated.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
"ABSENT"
Check for the presence and condition of fuses F31 and F32 (10 A) on the passenger
compartment fuse and relay box, component code 260 (see MR 374, Mechanical,
81C, Fuses, Fuses: List and location of components).
Check the connection and condition of the UCH connector, component code 645.
If the connector is faulty and there is a repair method (see Technical Note 6015A,
Repairing electrical wiring, Wiring: Precautions for repair), repair the connector,
otherwise replace the wiring.
Check for + 12 V on connection BP11 of the lighting stalk, component code 209.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A,
Electrical wiring repair, Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
Check the operation of the side light control:
With the side light illuminated, check the continuity between connections BP11 and
L of component 209.
If the connection or connections are faulty and if there is a repair procedure (see
Technical Note 6015A, Electrical wiring repair, Wiring: Precautions for repair)
repair the wiring, otherwise replace it.
Check the continuity of the following connection:
•L between components 209 and 260.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A,
Electrical wiring repair, Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
If the fault is still present, contact the techline.
UCH_V0F_ET484
LIGHTING
Fault finding – Interpretation of statuses

80D-17
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-80D000$080.mif
LIGHTING
Fault finding – Interpretation of statuses80D
UCH
Vdiag No.: 0F
ET485HAZARD WARNING LIGHTS SIGNAL
NOTESThere must be no present or stored faults.
Activate the hazard warning lights switch.
The status should be PRESENT.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
"ABSENT"
Check for the presence and condition of supply fuse F31 (10 A) on the passenger
compartment fuse and relay box, component code 260 (see MR 374 Mechanical,
81C, Fuses, Fuses: List and location of components).
Check the connection and condition of the hazard warning lights switch connector,
component code 125.
If the connector is faulty and there is a repair method (see Technical Note 6015A,
Repairing electrical wiring, Wiring: Precautions for repair), repair the connector,
otherwise replace the wiring.
Check the operation of the hazard warning lights control.
Check the continuity between the following connections:
•64Q and MK of component 125,
•MK and 64D of component 125.
If the connection or connections are faulty and if there is a repair procedure (see
Technical Note 6015A, Electrical wiring repair, Wiring: Precautions for repair)
repair the wiring, otherwise replace it.
Check the continuity of the following connection:
•64D between components 125 and 645.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A,
Electrical wiring repair, Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
UCH_V0F_ET485

80D-19
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-80D000$080.mif
LIGHTING
Fault finding – Interpretation of statuses80D
UCH
Vdiag No.: 0F
ET486
ET487RIGHT-HAND INDICATOR SIGNALLEFT-HAND INDICATOR SIGNAL
NOTESThere must be no present or stored faults.
Switch on the ignition.
Activate the left or right direction indicator control.
The status should be PRESENT.
Special note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
"ABSENT"
Check for the presence and condition of supply fuse F31 (10 A) on the passenger
compartment fuse and relay box, component code 260 (see MR 374 Mechanical,
81C, Fuses, Fuses: List and location of components).
Check the connection and condition of the direction indicator stalk connector,
component code 209 and the UCH connector, component code 645.
If the connector or connectors are faulty and there is a repair procedure (see
Technical Note 6015A, Electrical wiring repair, Wiring: Precautions for repair),
repair the connector, otherwise replace the wiring.
Check the operation of the indicator light stalk in the left-hand indicator position:
Check the continuity between connections 64T and NA.
Check the operation of the direction indicator stalk in the right-hand indicator position:
Check the continuity between connections 64S and NA.
Check the continuity of connection NA of component 209.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A,
Electrical wiring repair, Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
Disconnect the connectors of the UCH, the right-hand indicator, and the left-hand
indicator.
Check the continuity and insulation of the following connections:
•64S between components 209 and 645,
•64T between components 209 and 645.
If the connection or connections are faulty and if there is a repair procedure (see
Technical Note 6015A, Electrical wiring repair, Wiring: Precautions for repair)
repair the wiring, otherwise replace it.
If the fault is still present, contact the techline.
UCH_V0F_ET486/UCH_V0F_ET487