door lock RENAULT KANGOO 2013 X61 / 2.G Mechanism And Accessories Workshop Manual

NON-SIDE OPENING ELEMENT
MECHANISMS
Exterior handle for rear door
Rear screen wiper motor
Rear door lock
Rear door latches
Exterior handle for tailgate
Hinged rear roof flap cross member51-1
51-2
51-3
51-4
51-5
51-6
51-7
51-8
51-9
51-10
51-12 Pages
Contents
Safety
Tooling
SIDE OPENING ELEMENT
MECHANISMS
Window winder handle on front
door
Door opening handle - interior,
front door
Door opening handle - exterior,
front door
Front door lock
Front door window riser
Door barrels
Interior handle for opening the
sliding door
Exterior handle for sliding door
Locking warning light and sliding
door lock
Sliding door runners
Adjusting the sliding doorWINDOWS
Tilting or fixed windows in sliding
door
Fixed or moving side window
Window in rear door and window in
tailgate
Moving window/latch
EXTERIOR PROTECTION
Roof protection strip
Bumpers
Side protection strips
Protective panel at rear
51
55
54
Mechanisms and
accessories
50-1
50-2 54-4
54-5
54-6
54-7
55-1
55-3
55-4
55-5 GENERAL
50
52
52-1
52-2
52-3
52-4
52-5
52-6Exterior rear view mirror
Rear view mirror
Rear screen washer jet
Number plate light56-1
56-2
56-3
56-4 EXTERIOR ACCESSORIES
Dashboard 57-1 LOWER INTERIOR ACCESSORIES
56
57
Pages
59-1
59-2 Upper storage compartment in cab
Front seat belts
Rear seat belts
59
58-1 UPPER INTERIOR ACCESSORIES
58
INTERIOR SAFETY ACCESSORIES WINDOWS
Windscreen
Front door window54
54-1
54-3

SIDE OPENING ELEMENT MECHANISMS
Window winder handle on front door
Insert cloth (1) to protect the trim and position a
block between the cloth and the tool. Then use a
locally made fork or tool
FACOM D115 as a lever
to remove the window winder handle.
NOTE: The unpicking tool may be used for this
operation.
51
92221R
51-1

SIDE OPENING ELEMENT MECHANISMS
Door opening handle - exterior, front door
51
PRB5102
Disconnect the control linkage for locking the
door and opening it from the outside.
REMOVING
First remove the trim (see section 72) and the anti-
tamper shield. Then remove the handle mounting
bolt.
12981R
12980S
51-3

SIDE OPENING ELEMENT MECHANISMS
Front door lock
51
PRB5104
- the interior slide rail (A).
Disconnect the control linkage for locking the
door and opening it from the outside.
Remove the fittings securing the lock (B).
Disconnect the electric harness, depending on the
version.
REMOVING
After removing the trim (see section 72), remove:
12982R
12983R
- the anti-tamper shield (1) from the lock,
51-4

SIDE OPENING ELEMENT MECHANISMS
Exterior handle for sliding door
51
PRB5103
- the opening control cable (2).
Remove the mounting bolts (3).
REMOVING
First remove the trim (see section 72) and then un-
clip:
- the linkage for the door locking warning light
(1),
13159R
51-8

SIDE OPENING ELEMENT MECHANISMS
Locking warning light and sliding door lock51
13158R
First remove the trim. Then perform the following operations:
REMOVING THE WARNING LIGHT
Release the mounting clips (1), linkage (2) and control cable (3).
REMOVING THE LOCK
Remove the mounting bolts.
Disconnect the wiring harness, depending on the version.
Disconnect the control cables.
51-9

NON-SIDE OPENING ELEMENT MECHANISMS
Rear door lock
Unclip control cables for top and bottom latches.
52
REMOVING
First remove trim and screen wiper assembly.
PRB5206
13104R
13113R
Then remove mounting bolts.
52-3

NON-SIDE OPENING ELEMENT MECHANISMS
Rear door latches
Remove mounting bolts and pull latch - cable
assembly.
52
REMOVING
First remove trim for lock (see section 72) and then
unclip cables (see section 52).
PRB5202
13256R
52-4