RENAULT MEGANE SCENIC 1995 Service Repair Manual

LOWER STRUCTURE
Rear end pillar lower reinforcement
251e01-15365
41E
A
CAA11537R4
1
2
B
CAN11689R4
1 7
C
CAD11545R4
17 8
D
CAA11536-2R7
1 8
E
CAA11536R7
1
3
41-9

LOWER STRUCTURE
Rear end pillar lower reinforcement
251e02-15366
41E
F
CAA11537R2
1
2
G
CAA11538-1R7
1 6
H
CAA11538-1R7
1 5
41-10

LOWER STRUCTURE
Rear end cross member assembly
PRE4110
41F
INTRODUCTION
The replacement of this part is a complementary
operation to the rear end panel.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with:
- striker plate reinforcement,
- central reinforcement.
PARTS CONCERNED (thickness in mm) :
1Rear end cross member 0.8
2Rear end pillar lower reinforcement 1
3Rear floor base 0.8
4Rear floor 0.7
5Tailgate striker plate central
reinforcement 1.2
6Rear floor central reinforcement 0.8
41-11

LOWER STRUCTURE
Rear end cross member assembly
251f01-15367
41F
A
CAN11689R5
14
B
CAA11538-1R8
1
4
C
CAS13024-4R5
156
D
CAA11537-1R1a
1
2
E
CAA11536-1R2
6 1
41-12

LOWER STRUCTURE
Rear end cross member assembly
251f02-15363-1
41F
F
CAR11700-1R4
13
G
CAA11537-1R5
1
2
41-13

LOWER STRUCTURE
Rear floor unit
PRE4111
41G
INTRODUCTION
The replacement of this part is identical to the me-
thod described in the basic manual (M.R. 313 -
Section 41). Only the joints at the rear end pillar
lower reinforcements are different, which are des-
cribed in this document (section 41-E).
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with:
- side member assemblies,
- floor assembly,
- cross member under the floor,
- floor base assembly,
- rear end cross member assembly,
- rear end pillar reinforcement.
41-14

UPPER SIDE STRUCTURE
Top of body
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the roof for a
front side impact.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page) and MR 313 for the front
section.
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with welded pin.
43A
PRE4310
PARTS CONCERNED (thickness in mm) :
1Body side 0.77
2Rear quarter panel lining 0.7
3Rear pillar upper reinforcement 1
4Rear pillar lower reinforcement 1
5Stretcher lining 1.2
6Centre pillar reinforcement 1.5
7Rear corner reinforcement 1.2
8Rear end pillar lining 1
9Rear upper side drip moulding 1or
43-1

UPPER SIDE STRUCTURE
Top of body
253a01-15317
43A
A
CAS13033R3
1
1
B
CAE11546-6R5
C
CAE11546-2R7
D
CAB11539R8
12
3
1 5
3
1 5
43-2

UPPER SIDE STRUCTURE
Top of body
43A
E
CAQ11697R1
F
CAT13326-1R1
G
TOW15255-3R1
1 2
1 27
1 7 2 8
43-3

UPPER SIDE STRUCTURE
Top of body
253a02-15319
43A
I
CAB11540-1R3
1
9
J
CAB11540-1R7
1 9
43-4