relay RENAULT SCENIC 2007 J84 / 2.G Electrical Equipment - Xenon Bulbs Workshop Manual

80C-35
AFTER REPAIRPerform a check using the diagnostic tool.
Deal with any faults found.
V2 MR-372-J84-80C000$120.mif
80C
Program No.: V010
Vdiag No.: 05
ALP 1No dialogue with the computer
NOTESOnly refer to this customer complaint after a complete check with the diagnostic tool.
Check the 1K (5A) fuse of the passenger compartment relay and fuse box.
Replace it if necessary.
Turn on dipped-beam headlights.
If the bulbs light but the system does not perform initialisation and no communication is possible, perform the
following checks:
Remove the timed power supply 40A relay A located in the passenger compartment fuse and relay box.
Check the condition of the connections and repair if necessary.
Measure the following resistance values:
–Power circuit: Resistance between tracks 85 and 86 of the relay.
If the resistance is not 65 ± 5 ΩΩ Ω Ω
, replace relay A.
–Control circuit: Resistance between tracks 30 and 87A of the relay.
If the resistance is not approximately 1 ΩΩ Ω Ω
, replace relay A.
Check the battery voltage and carry out the operations necessary to obtain a suitable voltage (9.5 V < battery
voltage <14.4 V).
Check for:
a + 12 V supply before ignition on track 16 of the diagnostic socket,
a + 12 V supply after ignition on track 1 of the diagnostic socket,
earth on tracks 4 and 5 of the diagnostic socket.
Repair if necessary.
If the fault is still present, contact the Techline.
LAD_V05_ALP1
XENON BULBS
Fault finding – Fault finding charts