engine RENAULT SCENIC 2008 J84 / 2.G Electrical Equipment - Instrument Panel User Guide

83A-34
MR-372-J84-83A000$693.mif
V8
83A
INSTRUMENT PANEL
Fault finding - Interpretation of parameters
TDB_V08_PR027 /TDB_V0C_PR027
PR027
COOLANT TEMPERATURE
NOTESWith the engine running to vary the temperature, check the consistency between the
value of this parameter and the instrument panel display.
In the event of inconsistency, consult the interpretation of command AC008 Instrument panel needles.
Otherwise, test the multiplex network and the injection (see 88B Multiplexing, 13B Diesel injection and 17B
Petrol injection).
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
TDB ph2 (EG/MG)
Prog Version: 04xx
Vdiag No.: 08, 0C
MR-372-J84-83A000$693.mif

83A-36
MR-372-J84-83A000$693.mif
V8
INSTRUMENT PANEL
Fault finding - Interpretation of parameters83A
TDB ph2 (EG/MG)
Prog Version: 04xx
Vdiag No.: 08, 0C
PR112
CURRENT SETPOINT
NOTESWith the engine idling, the flow should be around 0.
Vary the engine speed to confirm the increase in flow.
Note: A fault with the fuel flow signal causes inconsistencies in the operation of the
trip computer.
Test the multiplex network and the injection (see 88B Multiplexing, 13B Diesel injection and 17B Petrol
injection).
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
TDB_V08_PR112/TDB_V0C_PR112

83A-38
MR-372-J84-83A000$693.mif
V8
INSTRUMENT PANEL
Fault finding - Interpretation of parameters83A
TDB ph2 (EG/MG)
Prog Version: 04xx
Vdiag No.: 08, 0C
PR116
ENGINE SPEED
NOTESWith the engine running, vary the engine speed to check the consistency between the
diagnostic tool and the instrument panel.
In the event of inconsistency, consult the interpretation of command AC008 Instrument panel needle gauges.
Otherwise, test the multiplex network and the injection (see 88B Multiplexing, 13B Diesel injection and 17B
Petrol injection).
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
TDB_V08_PR116/TDB_V0C_PR116