diagnostic menu RENAULT SCENIC 2008 J84 / 2.G Engine Compartment Connection Unit Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2008, Model line: SCENIC, Model: RENAULT SCENIC 2008 J84 / 2.GPages: 94, PDF Size: 0.28 MB
Page 14 of 94
ENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Configurations and programming87G
87G-14V7 MR-372-J84-87G050$220.mif
UPC
Vdiag No.: 48, 4CENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Configurations and programming
This operation is used to configure the Protection and Switching Unit to the equipment present in the vehicle.
Procedure to follow for modifying these configurations:
●Establish dialogue with the UPC.
●Select the repair mode menu.
●Select the configure menu.
●Select line VP004 Vehicle parameters.
●Select the line corresponding to the vehicle equipment from the drop-down menus.
●Confirm the configurations selected and then click on validate.
●Switch the ignition off and then back on for the configurations to be recognised by the computer.
●In the configuration reading menu, check that each configuration has been performed.
Make sure that all the vehicle's equipment is working.Equipment required
CLIP diagnostic tool
Configuration Configuration reading Name of configuration
Automatic
(the alternator is
automatically recognised
by the Protection and
Switching Unit)LC001 Type of alternator
VP004 LC008 Gearbox type
VP004 LC007 Front fog lights
VP004 LC013 Headlight washers
MR-372-J84-87G050$220.mif