warning lights RENAULT SCENIC 2008 J84 / 2.G LPN Radio Workshop Manual

86A-2
MR-372-J84-86A050$059.mif
V3
86A
RADIO
Fault finding - Introduction
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding procedure applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedure (this manual):
–Assisted fault finding (integrated into the diagnostic tool), Dialogys.
Wiring Diagrams:
–Visu-Schéma (CD-ROM), paper.
Type of diagnostic tools
–CLIP + multiplex line sensor
Special tooling required
3. REMINDERS
Procedure
Scénic II ph2:
To run fault finding on the vehicle computers, switch on the forced + after ignition feed.
Proceed as follows:
*LPN: Low Price NavigationVehicle(s): Espace IV phase 2, Scénic II phase 2,
Trafic II phase 2, Kangoo 2
Function concerned: Radio, satellite navigationName of computer: LPN* radio navigation
VDIAG NO: C4
Special tooling required
Multimeter
Elé. 1681 Universal bornier
Switch on the forced + after ignition feed:
–with the vehicle card in the card reader,
–press and hold the Start button (longer than 5 seconds) with start-up conditions not fulfilled,
–connect the diagnostic tool and perform the required operations.
Switching off the forced + after ignition feed:
Press the Start button twice briefly (less than 3 seconds).
See that the + after ignition feed has been cut off by checking that the computer warning lights on the instrument
panel have gone out.
LPN_VC4_PRELI
MR-372-J84-86A050$059.mif
LPN RADIO
Vdiag No: C4