service RENAULT SCENIC 2008 J84 / 2.G Multimedia ITS Workshop Manual

8Electrical equipment
V5 MR-372-J84-86C050$TOC.mif
V5
86C
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V5
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s. 2008
MULTIMEDIA
ITS
Program No.: 0020
Vdiag No.: 04
Fault finding - Introduction 86C - 2
Fault finding - List and location of components 86C - 7
Fault finding - Operating diagram 86C - 8
Fault finding - Features 86C - 9
Fault finding - Role of components 86C - 10
Fault finding - Replacement of components 86C - 11
Fault finding - Configurations and programming 86C - 12
Fault finding - Fault summary table 86C - 13
Fault finding - Interpretation of faults 86C - 14
Fault finding - Conformity check 86C - 24
Fault finding - Status summary table 86C - 28
Fault finding - Interpretation of statuses 86C - 29
Fault finding - Parameter summary table 86C - 35
Fault finding - Interpretation of parameters 86C - 36
Fault finding - Command summary table 86C - 37
Fault finding - Interpretation of commands 86C - 38
Fault finding - Customer complaints 86C - 43
Fault finding - Fault finding charts 86C - 45

MULTIMEDIA
Fault finding - Fault finding charts
86C
86C-49V5 MR-372-J84-86C050$936.mif
ITS
Program No.: 0020
Vdiag No.: 04
ALP 4 No traffic information messages appear on the screen
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Check that the customer is using the navigation system correctly.
TMC road information is disseminated via the FM
band on the radio. The TMC pictogram should be
green in order for the traffic information to be
received.
What colour is the TMC pictogram?
Green
The system is operating correctly, but there is no
traffic information to be transmitted.
Check that the traffic information display has been
activated.
Press the INFO button and select the TMC traffic
information; Traffic information adjustment;
Card display menus.
Has the display been activated?
YES
Check that the traffic information settings are
correct.
Press the INFO button and select the TMC traffic
information; Traffic information adjustment;
Type of information to be displayed; Traffic
information service menus.
Make any necessary adjustments.
GreyNo traffic information is being received.
NOActivate the traffic information display.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
ITS_V04_ALP4ITSJ84ph2V1.0