ABS RENAULT SCENIC 2011 J95 / 3.G Air Bag ACU4 - Seat Belt Pretensioners User Guide

AIRBAG - SEAT BELT PRETENSIONERS
Fault finding - Fault Interpretation
88C - 65
88C
V3 MR-372-J84-88C000$072.mif
AIRBAG ACU4
Vdiag: 04
DF241
CONTINUED
CC.1 - CC.0
NOTESNone.
Lock the computer.
Check the connections of the 22-track connector under the seat. Repair if necessary. Attach the 22-track
(Elé. 1687) test adapter under the seat (point C1).
The CLIP or XRBAG tool absolutely must be used to measure the proper insulation for the type of fault in
cable B.
Is the value obtained correct?
NO
YES
Seat wiring fault.
Replace the wiring between pointsC1 and C3.
Wiring fault between the computer and passenger's seat (C0/C1).
Replace the wiring if necessary.
AFTER REPAIRReconnect the computer and the passenger seat-cushion airbag/lap belt ignition
module, then switch the ignition back on. Clear the computer memory then switch off
the ignition.
Carry out the check again using the diagnostic tool and, if there are no faults, unlock
the computer. When replacing the airbag module, do not forget to reconnect the earth
on the new one.
Destroy the seat airbag module or driver's seat lap belt pretensioner if it has been
replaced (tool Elé. 1287).
ACU4 Vdiag04 J84 1.0