RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual TWINGO 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1710/w960_1710-0.png RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

Page 111 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-105
ENGINE AND CYLINDER BLOCK ASSEMBLY
Valves: Adjustment
C44, and K9K
10A
aParts always to be replaced:
-rocker cover gasket
aRemove the rocker cover (see 11A, Top and front
of engine, Rocker cov

Page 112 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-106
ENGINE AND CYLINDER BLOCK ASSEMBLY
Valves: Adjustment
D4F or D7F
10A
I - PREPARATION STAGE FOR ADJUSTING THE 
VALVE CLEARANCES
aPosition the vehicle on a two-post lift ( (see Vehicle:
Towing a

Page 113 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-107
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
D4F – D7F – K9K
10A
REMOVAL
I - REFITTING PREPARATIONS OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Tow

Page 114 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-108
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
D4F – D7F – K9K
10A
REFITTING
I - REFITTING PREPARATIONS OPERATION
aDo not remove the flywheel drive plate bolts (2) .
aOn

Page 115 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-109
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
D4F – D7F – K9K
10A
Tightening order
aObserve the tightening order.
aTorque and angle tighten, in order, the D4F, D7F fly-

Page 116 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-110
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
K4M
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (0

Page 117 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-111
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
K4M
10A
-the flywheel.
REFITTING
I - REFITTING PREPARATION OPERATION
aUse SURFACE CLEANER  (see Vehicle: Parts 
and consumables

Page 118 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-1
TOP AND FRONT OF ENGINE
Pressure at end of compression: Check
K4M
11A
CHECK
I - PREPARATION OPERATION FOR CHECK
aRemove:
-the coils (see 17A, Ignition, Coils: Removal - Re-
fitting, page 17A-1)

Page 119 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-2
TOP AND FRONT OF ENGINE
Pressure at end of compression: Check
D4F
11A
CHECK
I - PREPARATION OPERATION FOR CHECK
aRemove the plugs (see 17A, Ignition, Plugs: Re-
moval - Refitting, page 17A-12) .

Page 120 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-3
TOP AND FRONT OF ENGINE
Accessories belt: Removal - Refitting
D4F, and 772, and STANDARD HEATING – D7F, and STANDARD HEATING
11A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aDisconnect the batte