RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual TWINGO 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1710/w960_1710-0.png RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

Page 211 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-94
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
aApply:
-two beads (3) of MASTIXO  (see Vehicle: Parts
and consumables for the repair) (04B, Consum-
ables - Produc

Page 212 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-95
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
aRefit the camshaft bearing caps.
aTorque tighten the bolts for camshaft bearing cap
no.5 (5 Nm ) (5) .
18724-2

Page 213 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-96
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
Inlet rocker shaft
aRefit the inlet rocker shaft by positioning:
-the rails in relation to the tappets,
-the markin

Page 214 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-97
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
Exhaust rocker shaft
aRefit the exhaust rocker shaft by positioning:
-the rails in relation to the tappets,
-the ma

Page 215 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-98
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
aTighten to torque and in order the camshaft bear-
ing cap bolts (5 N.m).
aCompletely loosen bolt (1) .
aTorque and

Page 216 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-99
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
aFit the threaded rod (10) of the (Mot. 1587) into the
camshaft.
aFit the protector with the camshaft seal on the c

Page 217 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-100
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
aTighten the collar nut until the cover comes into con-
tact with the cylinder head.aRemove:
-the nut,
-the cover,

Page 218 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-101
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D4F, and 780 or 782
11A
aRefit:
-the rocker cover (see 11A, Top and front of en-
gine, Rocker cover: Removal - Refitting, page
11A-66) ,
-

Page 219 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-102
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D7F
11A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting

Page 220 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 11A-103
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
D7F
11A
II -  OPERATION FOR REMOVAL OF PART 
CONCERNED
aFit the extractor (Mot. 1381).
aRemove the camshaft seal while tightening the bolt