wheel bolt torque RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual TWINGO 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1710/w960_1710-0.png RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual

Page 12 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-6
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (

Page 18 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-12
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
10A
-the subframe rear bolts (105 Nm),
-the subframe rear tie rod inner bolts (21 N.m),
-the subframe rear tie rod outer

Page 19 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-13
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
D4F or D7F
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and li

Page 22 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-16
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
D4F or D7F
10A
II -  REFITTING OPERATION FOR PART 
CONCERNED
aRefit:
-the sump fitted with a new seal,
-the sump bolts.
aTigh

Page 24 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-18
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K4M
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting)

Page 27 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-21
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K4M
10A
aPretighten in order (1) , (2) , (19) , (20) , (17) , (18)
the sump bolts (initial torque) (14 N.m).
aTighten to torq

Page 43 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-37
ENGINE AND CYLINDER BLOCK ASSEMBLY
Conrod bearing shell: Removal - Refitting
K9K
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and

Page 50 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-44
ENGINE AND CYLINDER BLOCK ASSEMBLY
Conrod bearing shell: Removal - Refitting
K9K
10A
aTilt the engine oil sump forwards in order to access
the oil pump bolts.
aTorque tighten the oil pump bolts

Page 57 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-51
ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil pump: Removal - Refitting
D4F or D7F
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifti

Page 63 of 652

RENAULT TWINGO 2009 2.G Engine And Peripherals Workshop Manual 10A-57
ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil pump: Removal - Refitting
K4M
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02
Page:   1-10 11-20 21-30 31-40 41-50 ... 90 next >