RENAULT TWINGO RS 2009 2.G Air Conditioning Workshop Manual

62A-40
AIR CONDITIONING
Pressure sensor: Removal - Refitting
AIR CONDITIONING or CLIMATE CONTROL
62A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 411, 02A, Lifting equip-
ment).
aRemove:
-the front wheels (see Wheel: Removal - Refitting)
(MR 411, 35A, Wheels and tyres),
-the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (MR 412, 55A, Exterior
protection),
-the front bumper (see Front bumper: Removal -
Refitting) (MR 412, 55A, Exterior protection).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the pressure sensor connector (1) .
aRemove the pressure sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the pressure sensor.
aConnect the pressure sensor connector.
II - FINAL OPERATION.
aRemove:
-the front bumper (see Front bumper: Removal -
Refitting) (MR 412, 55A, Exterior protection),
-the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (MR 412, 55A, Exterior
protection),
-the front wheels (see Wheel: Removal - Refitting)
(MR 411, 35A, Wheels and tyres).
121174
Note:
An automatic shut-off valve isolates the circuit
from the outside during removal; do not drain the
refrigerant from the circuit.

62A-41
AIR CONDITIONING
Exterior air temperature sensor: Removal - Refitting
62A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the right-hand door mirror glass (see Door mirror
glass: Removal - Refitting) (MR 412, 56A, Exteri-
or equipment),
-the right-hand door mirror cover (see Door mirror
casing: Removal - Refitting) (MR 412, 56A, Exte-
rior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the exterior air temperature sensor from its
mounting using a flat-blade screwdriver.
aCut the exterior air temperature sensor wires (see
Wiring: Repair) (Technical Note 6015A, 88A, Wir-
ing).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aSolder the exterior air temperature sensor feed
wires (see Wiring: Repair) (Technical Note 6015A,
88A, Wiring).
aClip the external air temperature sensor onto its sup-
port.II - FINAL OPERATION.
aRefit:
-the right-hand door mirror cover (see Door mirror
casing: Removal - Refitting) (MR 412, 56A, Exte-
rior equipment),
-the right-hand door mirror glass (see Door mirror
glass: Removal - Refitting) (MR 412, 56A, Exteri-
or equipment).
101624