wheel bolt torque RENAULT TWINGO RS 2009 2.G Chasiss Manual PDF

38C-15
ANTI-LOCK BRAKING SYSTEM
Front wheel speed sensor: Removal - Refitting
38C
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 411, 02A, Lifting equip-
ment).
aRemove the front wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) .
aRemove the clip (1) .
aLift part of the front wheel arch liner (2) .
aUnclip the pin (3) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the front wheel speed sensor cable con-
nector (4) .
aUnclip the front wheel speed sensor cable at (5) and
(6) . Tightening torquesm
front wheel speed sen-
sor bolt8 Nm
121479
121478
121477

38C-16
ANTI-LOCK BRAKING SYSTEM
Front wheel speed sensor: Removal - Refitting
38C
aRemove:
-the front wheel speed sensor bolt (7) ,
-the front wheel speed sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the front wheel speed sensor,
-the front wheel speed sensor bolt.
aTorque tighten the front wheel speed sensor bolt
(8 Nm).
aConnect the front wheel speed sensor cable con-
nector.
aClip on the front wheel speed sensor cable.II - FINAL OPERATION.
aRefit the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
121477
WARNING
To avoid damaging the wheel speed sensor
cable:
-Do not tension the cable,
-Do not twist the cable,
-Check that there is no contact with the sur-
rounding components,
-Do not use tools that may damage the cable.

38C-17
ANTI-LOCK BRAKING SYSTEM
Rear wheel speed sensor: Removal - Refitting
38C
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 411, 02A, Lifting equip-
ment).
aRemove the rear wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aOpen the rear wheel speed sensor connector pro-
tection unit flap (1) .
aDisconnect the rear wheel speed sensor cable con-
nector (2) .aUnclip the rear wheel speed sensor cable at (3) and
(4) . Tightening torquesm
rear wheel speed sen-
sor bolt8 Nm
121476
121476

38C-18
ANTI-LOCK BRAKING SYSTEM
Rear wheel speed sensor: Removal - Refitting
38C
aRemove:
-the rear wheel speed sensor bolt (5) ,
-the rear wheel speed sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the rear wheel speed sensor,
-the rear wheel speed sensor bolt.
aTorque tighten the rear wheel speed sensor bolt (8
Nm).
aClip on the rear wheel speed sensor cable.
aConnect the rear wheel speed sensor cable connec-
tor.II - FINAL OPERATION.
aClose the rear wheel speed sensor connector pro-
tection unit flap.
aRefit the rear wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
121476
WARNING
To avoid damaging the wheel speed sensor
cable:
-Do not tension the cable,
-Do not twist the cable,
-Check that there is no contact with the sur-
rounding components,
-Do not use tools that may damage the cable.