Seat Alhambra 2005 Owners Manual

Opening and closing87
Safety FirstControls and equipment Tips and Maintenance Technical Data
N No
ot
te
e
If the window in the driver or passenger door is hindered whilst closing
through stiffness or by an obstacle (roll-back function), the window will
open again immediately.
In this case you can only close the window again after the ignition has been
switched on.
K
Notes
The automaticopening/closing function* on the driver and
passenger door windows will not function after the vehicle battery
has been disconnected/reconnected.
To reinstall this function after reconnecting the battery, please note
the following points.
• • LLo
oc
ck
k vve
eh
hi
ic
cl
le
e
from the outside via the driver’s or passenger door.
When doing this please ensure that all doors and windows are
closed completely.
• • LLo
oc
ck
k tth
he
e vve
eh
hi
ic
cl
le
e aag
ga
ai
in
n
via the driver’s or passenger door. H Ho
ol
ld
d
t th
he
e kke
ey
y iin
n tth
he
e llo
oc
ck
ki
in
ng
g ppo
os
si
it
ti
io
on
n ffo
or
r aat
t lle
ea
as
st
t oon
ne
e sse
ec
co
on
nd
d.
.
The automaticclosing function* on the driver’s and passenger side
has been reactivated.
V Ve
en
nt
t wwi
in
ng
g*
*
Mechanically operated vent wing windows
• • BBe
e vve
er
ry
y cca
ar
re
ef
fu
ul
l wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e eel
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s aan
nd
d rro
oo
of
f ffr
ro
om
m tth
he
e
o ou
ut
ts
si
id
de
e!
!
• • BBe
e vve
er
ry
y cca
ar
re
ef
fu
ul
l wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s!
! CCl
lo
os
si
in
ng
g ffr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e
w wi
it
th
ho
ou
ut
t vvi
is
si
ib
bi
il
li
it
ty
y oor
r iin
n aa cca
ar
re
el
le
es
ss
s mma
an
nn
ne
er
r cca
an
n cca
au
us
se
e sse
er
ri
io
ou
us
s iin
nj
ju
ur
ry
y,
,
e es
sp
pe
ec
ci
ia
al
ll
ly
y wwi
it
th
h cch
hi
il
ld
dr
re
en
n.
.
• • CCh
hi
il
ld
dr
re
en
n ssh
ho
ou
ul
ld
d nne
ev
ve
er
r rre
em
ma
ai
in
n aal
lo
on
ne
e iin
ns
si
id
de
e tth
he
e vve
eh
hi
ic
cl
le
e wwh
he
en
n iit
t iis
s llo
oc
ck
ke
ed
d
f fr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e,
, aas
s oou
ut
ts
si
id
de
e hhe
el
lp
p wwi
il
ll
l bbe
e hhi
in
nd
de
er
re
ed
d iin
n tth
he
e eev
ve
en
nt
t oof
f aan
n
e em
me
er
rg
ge
en
nc
cy
y.
.
K
W WA
AR
RN
NI
IN
NG
G
AL0-082Fig. 70

Opening and closing88
O Op
pe
en
ni
in
ng
g
Pull locking arm in direction of arrow and push outwards until the
lever catches.
C Cl
lo
os
si
in
ng
g
Pull locking arm forwards, then inwards until the lever catches.
K
Electrically operated vent wing windows*
The windows only work with the ignition switched on.
O Op
pe
en
ni
in
ng
g
Press the upper surface of the respective switch to open the
desired window.C Cl
lo
os
si
in
ng
g
Pull upper surface of the respective switch to close the desired
window.
N No
ot
te
e
The windows on vehicles with central locking can also be closed from the
outside. For this purpose, the key must be in the lock of the driver’s or
passenger doors or the tailgate and held in the locking position.
K
AL0-006Fig. 71
B Be
e cca
ar
re
ef
fu
ul
l wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
w!
!
C Ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d ccl
lo
os
si
in
ng
g oof
f tth
he
e wwi
in
nd
do
ow
ws
s cca
an
n cca
au
us
se
e iin
nj
ju
ur
ri
ie
es
s.
.
T Th
he
er
re
ef
fo
or
re
e wwh
he
en
n lle
ea
av
vi
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e,
, aal
lw
wa
ay
ys
s tta
ak
ke
e tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y wwi
it
th
h yyo
ou
u.
.
W
WA
AR
RN
NI
IN
NG
G

Opening and closing89
Safety FirstControls and equipment Tips and Maintenance Technical Data
S Sl
li
id
di
in
ng
g/
/t
ti
il
lt
ti
in
ng
g rro
oo
of
f*
*
Opening and closing the opening roof
With ignition switched on, the roof can be opened and closed with
the switch.T To
o oop
pe
en
n
Press switch
1.
T To
o ccl
lo
os
se
e
Press switch
2.
T To
o tti
il
lt
t
Press button
3.
T To
o llo
ow
we
er
r
Press switch
2.
N No
ot
te
e
• If the roof is open and should be tilted, press button 3and hold until the
function is complete.
If the roof should be opened directly from the tilted position, press button
1and hold until the function is complete.
• When tilting the glass roof, the screen to prevent intensive sunlight
shining in will also open automatically with the roof. If required it can be
closed by hand when the roof is closed.
• On vehicles, the roof* can also be closed with central locking by holding
the key in the lock position when locking the vehicle.
K
Fig. 72
1
3
2
B7M-0020
C Ca
ar
re
e ssh
ho
ou
ul
ld
d bbe
e tta
ak
ke
en
n wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e rro
oo
of
f!
! CCa
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d
c cl
lo
os
si
in
ng
g oof
f tth
he
e rro
oo
of
f cco
ou
ul
ld
d cca
au
us
se
e iin
nj
ju
ur
ri
ie
es
s.
. TTh
he
er
re
ef
fo
or
re
e,
, wwh
he
en
n lle
ea
av
vi
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e
a al
lw
wa
ay
ys
s tta
ak
ke
e tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y wwi
it
th
h yyo
ou
u.
.
W
WA
AR
RN
NI
IN
NG
G

Opening and closing90
Emergency operationIf the system should develop a fault the roof can also be closed by
hand.
• Remove interior light by inserting flat blade of screwdriver on the
right-hand side between the light and the headlining and turning
the screwdriver.
• Change screwdriver blade round and take out the two Phillips
screws (arrow
1).
• Move cover in direction shown by arrow
2and remove.
• Turn cover of crank opening
Ain the direction of the arrow.
• Pull crank out of retainer, insert it in the opening and close
sliding roof.
• Replace crank in retainer, and fit cover
Aover crank opening.
• Replace cover and interior light.
K
A
AL0-085
1
2
AL0-084Fig. 73
Fig. 74

Lights and visibility91
Safety FirstControls and equipment Tips and Maintenance Technical Data
L
Li
ig
gh
ht
ts
s aan
nd
d vvi
is
si
ib
bi
il
li
it
ty
y
S
Sw
wi
it
tc
ch
he
es
s
Switching lights on and off
L
Li
ig
gh
ht
ti
in
ng
g ssw
wi
it
tc
ch
h 1
– Switched off
– Side lights
1)
– Dipped or main beamThe headlights only work when the ignition is on. When the engine
is being started and after ignition has been switched off, the
headlights are automatically switched to side lights.
Dipping and flashing the headlights
⇒"Indicators and dipped
beam lever" chapter.
N No
ot
te
e
If lights are not switched off and the ignition key is removed, a buzzer* will
sound when the driver’s door is open.
F Fr
ro
on
nt
t ffo
og
g lli
ig
gh
ht
ts
s*
*
With lighting switch in side light or dipped/main beam position
pull switch out to first detent.
R Re
ea
ar
r ffo
og
g lli
ig
gh
ht
t*
*
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
ho
ou
ut
t ffo
og
g lli
ig
gh
ht
ts
s
Turn lighting switch to dipped/main beam position and pull switch
out to stop.
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
h ffo
og
g lli
ig
gh
ht
ts
s
With lighting switch in dipped/main beam position, pull switch out
to 2nd detent.
0
Fig. 75
1)In some countries, when the side lights are switched on with the ignition on, the
dipped headlights also come on with reduced intensity.
123
AL0-018


Lights and visibility92
N
No
ot
te
e
• A warning lamp in the instrument panel lights up when the rear fog light is
switched on.
• Due to the amount of dazzle it causes, the rear fog light should only be
switched on when the visibility is very poor (e.g. in some E.U. countries, 50
metres).
The electrical system of the factory fitted tow bar* is wired up so
that when towing a trailer fitted with rear fog lights, the rear fog
light on the towing vehicle are automatically switched off.
K
Coming Home/Leaving Home function
After dark the area around the car is lit up with the aid of the
coming home / leaving home function.
T To
o aac
ct
ti
iv
va
at
te
e tth
he
e ffu
un
nc
ct
ti
io
on
n
This function can be activated, using the light switch, for 2 minutes
after the dipped headlights are switched off. This is done as
follows:
– Switch off the ignition with the doors closed.
– Move the indicator lever briefly in the direction of the steering
wheel (headlight flasher).
– Unlock the driver's door At his point the function is activated.
O Op
pe
er
ra
at
ti
io
on
n oof
f tth
he
e CCo
om
mi
in
ng
g HHo
om
me
e/
/L
Le
ea
av
vi
in
ng
g HHo
om
me
e ffu
un
nc
ct
ti
io
on
n
• When the driver’s door is opened, the dipped front headlights
will be switched on automatically for approximately 3 minutes.• If the driver’s door is closed during these 3 minutes, the dipped
headlights will remain lit for approximately 30 seconds.
• Switching on the vehicle ignition during the activation period will
switch off the dipped headlights.
K
Instrument lighting/Headlight range control*
I In
ns
st
tr
ru
um
me
en
nt
t lli
ig
gh
ht
ti
in
ng
g 2
When the lights are on, the level of the instrument lighting can be
set to any intensity by turning the knurled wheel next to the light
switch.
H He
ea
ad
dl
li
ig
gh
ht
t rra
an
ng
ge
e cco
on
nt
tr
ro
ol
l
3
With the electrical range control the headlight settings can be
matched exactly to the load condition of vehicle. This prevents
Fig. 76
123
AL0-018


Lights and visibility93
Safety FirstControls and equipment Tips and Maintenance Technical Data
oncoming traffic from being dazzled more than is unavoidable. At
the same time the correct headlight beam setting provides the
best possible visibility for the driver.
The headlights can only be regulated with the dipped headlights
switched on.
To lower the beams, turn knurled discfrom the basicposition (–)
downwards.
K
S Sw
wi
it
tc
ch
he
es
s iin
n tth
he
e cce
en
nt
tr
ra
al
l cco
on
ns
so
ol
le
e
Rear window heating 1
The heating will only function when the ignition is turned on.
On vehiclesw wi
it
th
ho
ou
ut
t wwi
in
nd
ds
sc
cr
re
ee
en
n hhe
ea
at
ti
in
ng
g
*, the heating is turned
on/off using this switch. A warning lamp will light up in the switch
when the heating is on.
On vehicles with electrically adjustable exterior mirrors the mirrors
are heated as long as the rear window heating is switched on.
On vehiclesw wi
it
th
h wwi
in
nd
ds
sc
cr
re
ee
en
n hhe
ea
at
ti
in
ng
g
, the heating is switched on
with a button.
The rear window heating automatically switches off about 20
minutes after it is switched on. It can also be switched off earlier by
pressing the button again.
If the heating is still required, simply press the button again. It will
again be switched off automatically after a further 20 minutes.
On vehicles with electrically adjustable exterior mirrors the mirrors
are heated as long as the rear window heating is switched on.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
As soon as window is clear, switch element off. The reduced current
consumption helps to reduce fuel consumption ⇒"Economic and
environment friendly driving" chapter.K
Fig. 77
1
2
3
4
5
6
7
8
ESP2PDC
1
AL0-087

Lights and visibility94
Windscreen heating*2
The windscreen heating works only when the engine is running.
When it is on a warning lamp in the switch lights up.
The windscreen heating automatically switches off about 10
minutes after it is switched on. It can also be switched off earlier by
pressing the button again.
If the heating is still required, press the switch again. The switch
will again switch off after about 10 minutes.
N No
ot
te
e
For technical reasons, the blower of the passenger compartment heater is
switched off when the windscreen heating is switched on.K
Knurled wheel for seat heating*3/7
The cushion and backrest of the front seats can be heated
electrically when the ignition is on.
The heating is switched on and regulated with the knurled wheel.
To switch heating off, turn knurled wheel to the basic position (0).
K
Anti-skidding system of the drive wheels (TCS).
Electronic Stability Program (ESP)* 4
The TCS or ESP connect automatically when the engine is switched
on. If necessary, they may be switched off briefly by pressing
corresponding switch.
If it is connected a warning lamp will light
⇒"Warning lamps"
chapter.
For further information
⇒pages 164 to 166.K
Hazard warning lamps5
The system also works when the ignition is switched off.
Switch on the hazard warning lamps if, for example:
– Your vehicle stops because of a technical defect,
– You have an emergency
– You reach the tail end of a traffic jam.
Fig. 78
1
2
3
4
5
6
7
8
ESP2PDC
1
AL0-087


Lights and visibility95
Safety FirstControls and equipment Tips and Maintenance Technical Data
When the hazard warning lamps are switched on, all four signal
lights flash simultaneously. The warning lamps for the indicators
and a warning lamp in the switch will also flash.
Note legal requirements when employing such safety measures.
K
Parking distance control (PDC)*6
This system helps prevent small bumps which may occur while
parking, especially in city traffic when parking between other cars.
If the appropriate switch (PDC) in the centre console is pressed, the
sensors in the vehicle’s bumper warn the driver of the proximity of
objects with an intermittent beep and a warning lamp. This
warning occurs when the distance between vehicle and obstacle is
40cm. The beep speeds up until it becomes continuous, when the
distance is approximately 20cm.
K
Free space for additional switch8
⇒ fig. 78K
Sun visors
The sun visors can be pulled out of the side mountings and swung
towards the doors.
The illuminated* make-up mirror is switched on when the cover is
opened.
K
Fig. 79AL0-088

Lights and visibility96
L
Li
ig
gh
ht
ts
s
Indicators and dipped beam lever
The turn signals only work when the ignition is switched on.
Right turn signals – lever up
1
Left turn signals – lever down 2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
Move the lever up
1or down 2to the pressure point and hold in
this position – the warning lamp should flash at the same time.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
S Sh
ho
or
rt
t oor
r llo
on
ng
g bbe
ea
am
ms
s
With the long or short beam connected push the lever towards the
steering wheel
4. When main beam is on, the main beam warning
lamp will light up.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down 2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.
N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
1
24
3
TO8-016AFig. 80