Seat Alhambra 2005 Workshop Manual
Manufacturer: SEAT, Model Year: 2005, Model line: Alhambra, Model: Seat Alhambra 2005Pages: 272, PDF Size: 6.35 MB
Page 51 of 272
Instrument panel47
Safety FirstControls and equipment Tips and Maintenance Technical Data
When the vehicle is stationary or travelling at very low speeds, the
temperature displayed may be slightly higher than the actual
outside temperature as a result of radiant heat from the engine.
K
Multi-function indicator*
Apart from the time, the multi-function indicator offers a varietyof
additional information.
• Outside temperature*
• Current fuel consumption
• Average fuel consumption
• Distance that can be travelled with the amount of fuel left in the
tank.
• Km driven
• Average speed
• Driving time
On the upper part of the display appears the symbol of the
function, except if the time is indicated
⇒fig. 47with average
consumption.
If you press button
Bon the windscreen wiper lever while ignition
is on additional information will appear:
Fig. 47
Fig. 48
0 2
15
6
4
7
8
1/ m i n
x1000
3
10.0
Ø l/100 km
1
EPC
AL0-071
ABAL0-153
Page 52 of 272
Instrument panel48
If you press the upper part of the button, the different functions will
appear consecutively.
If you press the lower part of the button, the functions will appear
in the opposite direction.
The following data can be obtained in this order by the memory:
• Driving time
• Km driven
• Average speed
• Average fuel consumption
The instantaneous fuel consumption will not be memorized but will
always appear in an updated version.
M Me
em
mo
or
ry
y
Two automaticmemories are fitted:
T Th
he
e iin
nd
di
iv
vi
id
du
ua
al
l mme
em
mo
or
ry
y ((M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11)
)
collects the
following data while ignition is on: driving time, kms driven and
fuel consumption.
The calculation of the average speed and average consumption is
based on this data.
If the trip resumes within the 2 following hours from switching off
ignition the new data will be added to the one already memorized.
If the interruption is longer than 2 hours, all data will automatically
be deleted from the memory.T Th
he
e ggl
lo
ob
ba
al
l mme
em
mo
or
ry
y ((M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22)
)
collects all data
from all trips up to 100 driving hours, 10,000 km and 1,000 liters
of fuel consumption. This data is used to calculate the average
speed and average consumption for all individual trips.
In case one of these values is exceeded, the memory is deleted
and a new count starts. As opposed to the individual memory, the
global memory will not be deleted if the trip is interrupted for more
than 2 hours.
T To
o cco
on
ns
su
ul
lt
t
data select the respective memory by pressing the
"Reset"
⇒fig. 48Abutton on the windscreen wiper lever.
The digital clock display will indicate the memory which was
selected:
M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11 ––
(Individual memory)
M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22 ––
(Global memory)
D De
el
le
et
te
e mme
em
mo
or
ri
ie
es
s
If you press the "Reset"
⇒fig. 48Abutton for more than two
seconds the selected memory will be deleted.
If the battery of the vehicle is disconnected both memories will be
deleted.
V Vi
is
su
ua
al
li
iz
ze
ed
d iin
nf
fo
or
rm
ma
at
ti
io
on
n
When the ignition is switched on the last selected function or the
outside temperature with the ice symbol (warning for icy road) will
appear on the display.
Page 53 of 272
Instrument panel49
Safety FirstControls and equipment Tips and Maintenance Technical Data
N No
o ssy
ym
mb
bo
ol
l -- TTi
im
me
e
The time appears even if the ignition is switched off.
The clock is set by turning the button next to the rev counter in the
instrument panel
⇒page 46 "Digital clock".
° °C
C -- OOu
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e
The temperature range goes from –40°C to +58°C. If the car is
stationary or if driving at slow speed the indicated temperature
may be slightly higher than the real temperature due to engine
heat.
If the outside temperature is between +4°C and –7°C the ice
symbol will appear on the display (warning for icy road).
This symbol will flash at first for about 5 seconds and then remain
lit while the outside temperature is not above +4°C or below –7°C.
W Wh
he
en
n tth
he
e ssy
ym
mb
bo
ol
l ffo
or
r iic
cy
y rro
oa
ad
ds
s aap
pp
pe
ea
ar
rs
s tth
he
e mmu
ul
lt
ti
i-
-f
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r
a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y iin
nd
di
ic
ca
at
te
es
s tth
he
e oou
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e ((w
wa
ar
rn
ni
in
ng
g ffo
or
r iic
cy
y
r ro
oa
ad
ds
s)
),
, rre
eg
ga
ar
rd
dl
le
es
ss
s oof
f tth
he
e sse
el
le
ec
ct
te
ed
d ffu
un
nc
ct
ti
io
on
n.
.If you wish to see the previously selected function press the
⇒fig.
48Bbutton on the windscreen wiper lever.
l l/
/1
10
00
0 kkm
m -- IIn
ns
st
ta
an
nt
ta
an
ne
eo
ou
us
s ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
Instantaneous consumption is shown in l/100 km. The computer
calculates the consumption every 30 meters. When the vehicle is
stationary the computer will display the last value in the memory.
On some models, the display will show fuel consumption in
ltr/hour when the vehicle is in a stationary position with the engine
running.
If the instantaneous consumption display is selected when the
engine is started, the computer will indicate the average
consumption for the first 30 to 40 meters.
You can use this display to adjust your driving style to the desired
fuel consumption.
Ø Ø ll/
/1
10
00
0 kkm
m -- AAv
ve
er
ra
ag
ge
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
This mode shows the average fuel consumption only and not the
consumption at the time of reading.
Once the memory is deleted the display will show the average
consumption after approximately 30 meters. Until then, the display
will show dashes instead of the value. The value is updated
throughout the trip every 5 seconds.
If you select the individual memory( (M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11)
)
the
average consumption of a particular trip is displayed.
I In
n cca
as
se
e tth
hi
is
s ssy
ym
mb
bo
ol
l iis
s uus
se
ed
d aas
s aan
n iin
nd
di
ic
ca
at
ti
io
on
n ffo
or
r iic
cy
y rro
oa
ad
ds
s,
, kke
ee
ep
p iin
n mmi
in
nd
d tth
ha
at
t
t th
he
e rro
oa
ad
d mma
ay
y cco
on
nt
ti
in
nu
ue
e tto
o bbe
e iic
cy
y eev
ve
en
n iif
f tth
he
e tte
em
mp
pe
er
ra
at
tu
ur
re
e iis
s aar
ro
ou
un
nd
d ++4
4°
°C
C.
.
W
WA
AR
RN
NI
IN
NG
G
Page 54 of 272
Instrument panel50
If you select the global memory( (M
Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22)
)
the
average consumption for all individual trips is displayed
⇒"Global
memory".
N No
ot
te
e
The amount of used fuel will not be displayed.
k
km
m -- KKm
ms
s ddr
ri
iv
ve
en
n
I In
n tth
he
e MMu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11 ppo
os
si
it
ti
io
on
n tth
he
e mme
em
mo
or
ry
y
displays the
kms driven since the ignition was switched on or since the memory
was deleted. See previous page "Individual memory".
I In
n tth
he
e MMu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22 ppo
os
si
it
ti
io
on
n tth
he
e mme
em
mo
or
ry
y
displays the
kms driven on all individual trips. See previous page "Global
memory".
The highest display for either position is 10,000 km. When this is
exceeded it will reset itself.
k km
m/
/h
h -- AAv
ve
er
ra
ag
ge
e ssp
pe
ee
ed
d
See chapter "Average fuel consumption".
D Dr
ri
iv
vi
in
ng
g tti
im
me
e
The same is valid for "driving time" as for "km driven". The
maximum time shown in the display is 99 hours and 59 minutes.
When this is exceeded it will reset itself.
K
Coolant temperature
The gauge starts to work when the ignition is switched on.
When the ignition is switched on the warning lamp
Cflashes for a
few seconds as a functional check.
AC Co
ol
ld
d
Avoid high engine speeds and do not work engine too hard yet.
BN No
or
rm
ma
al
l
When the vehicle is driven normally the needle should settle down
in the central zone.
When engine is working hard and the ambient temperature is high,
the needle may move a long way up.
Fig. 49
1/ 2
0
1
/
90
6012 0
5
6
BA
CAL0-072
Page 55 of 272
Instrument panel51
Safety FirstControls and equipment Tips and Maintenance Technical Data
T Th
hi
is
s iis
s nno
ot
t sse
er
ri
io
ou
us
s aas
s llo
on
ng
g aas
s tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p Cd
do
oe
es
s nno
ot
t ffl
la
as
sh
h.
.
CW
Wa
ar
rn
ni
in
ng
g lla
am
mp
p
If the lamp flashes and a tone is heard at the same time when
driving, first check the coolant temperature being displayed.
If the needle is in the normal zone, top the coolant up at the next
opportunity.
If the reading is in the right hand area, the temperature of the
coolant level is too high. S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and try to find
cause of trouble
⇒"Coolant system" chapter.
N No
ot
te
e
Bear in mind the warnings in the "Coolant system" chapter.
A
Ad
dd
di
it
ti
io
on
na
al
l lli
ig
gh
ht
ts
s iin
n ffr
ro
on
nt
t oof
f tth
he
e cco
oo
ol
li
in
ng
g aai
ir
r iin
nt
ta
ak
ke
e iin
nt
te
er
rf
fe
er
re
e wwi
it
th
h tth
he
e
f fl
lo
ow
w oof
f cco
oo
ol
li
in
ng
g aai
ir
r.
. AAt
t hhi
ig
gh
h aam
mb
bi
ie
en
nt
t tte
em
mp
pe
er
ra
at
tu
ur
re
es
s aan
nd
d ffu
ul
ll
l tth
hr
ro
ot
tt
tl
le
e
t th
he
er
re
e iis
s aa dda
an
ng
ge
er
r tth
ha
at
t tth
he
e een
ng
gi
in
ne
e wwi
il
ll
l tth
he
en
n oov
ve
er
rh
he
ea
at
t.
.
K
Warning lamps display/Selector lever positions*
(automatic gear)
This screen displays several warning lamps and depending on the
model version also written messages
⇒chapter "Onboard
computer/navigation".
Information on selector lever positions appear in the chapter
"Automaticgear".
K
Fuel gauge
This gauge works when ignition is switched on.
The tank holds about 70 litres.
When the needle reaches the red reserve zone (arrow) and the
warning lamp
Dlights up, there is about 8 litres (2 gallons) of fuel
left in the tank.
K
Fig. 50
1/ 2
0
1/190
12 0
406080
507090
D!AL0-073
Page 56 of 272
Instrument panel52
Mileage clock/Trip mileage
The upper counter registers the total distance driven and the lower
one the short trips.
The last figure of the lower counter indicates 100 m.
The trip mileage can be put back to zero by pressing the reset knob
⇒fig. 46Bnext to the speedometer.K
Service interval indicator*
If a service is due, the word "Service" will flash for about 20
seconds when the engine is switched on, the vehicle is not moving
and the mileage clock reset button is not touched.
The deadline for any service will be displayed 3,000 km in
advance.
• • IIn
nt
te
er
rm
mi
it
tt
te
en
nt
t sse
er
rv
vi
ic
ce
e*
* ffo
or
r 220
0 sse
ec
co
on
nd
ds
s
. Indicates that the time for a
new service has elapsed.
• • SSe
er
rv
vi
ic
ce
e KKm
m 33,
,0
00
00
0*
* ffo
or
r 220
0 sse
ec
co
on
nd
ds
s
. Indicates that the next service
is due in 3,000 km. Every 100 km the number of km will decrease
by 100 km up to the indication "Service".
A Af
ft
te
er
r tth
he
e sse
er
rv
vi
ic
ce
e hha
as
s bbe
ee
en
n ppe
er
rf
fo
or
rm
me
ed
d tth
he
e ddi
is
sp
pl
la
ay
y nne
ee
ed
ds
s tto
o bbe
e
r re
es
se
et
t.
.
The display will be reset by a Technical Service Centre as follows:
• With the ignition switched off, press and hold the trip meter reset
button below the speedometer.• Switch ignition on and release the reset button. The display will
show the next service.
• Turn the minute button of the digital clock to the right.
• Switch ignition off. Now the service indicator has been set to
zero.
T Th
he
e sse
er
rv
vi
ic
ce
e iin
nd
di
ic
ca
at
to
or
r cca
an
nn
no
ot
t bbe
e cco
om
mp
pl
le
et
te
el
ly
y sse
et
t tto
o zze
er
ro
o.
. IIt
t cca
an
n oon
nl
ly
y
b be
e sse
et
t tto
o 115
5,
,0
00
00
0 kkm
m.
.
N No
ot
te
e• Do not zero the display between the Service intervals. Otherwise an
incorrect reading will be shown.
• If the battery is disconnected the details in the service displayare
retained.
• If the instrument panel changes due to repair, the service interval display
must be reset. This should be carried out by a Technical Service Centre.
Should the display not be reprogrammed, then the service work should be
carried out in accordance with the Inspection and Maintenance Plan and not
according to the Service Interval Display. The Service interval indicator only
becomes valid again after carrying out an inspection and resetting the
indicator.
F Fa
au
ul
lt
t iin
nd
di
ic
ca
at
to
or
r
If a failure occurs, "FAIL" would appear either on the instrument
panel or the trip meter. The defect should be repaired by a
Technical Service Centre as soon as possible.
K
Page 57 of 272
Instrument panel53
Safety FirstControls and equipment Tips and Maintenance Technical Data
Speedometer
The speedometer is fitted with a digital mileage clock and a trip
mileage clock as well as a service interval indicator* and outside
temperature*.
During the running-in period the instructions in the chapter "The
first 1,500 kilometres and afterwards" should be noted.
K
Voltmeter
The voltmeter shows the voltage of the vehicle’s electrical
installation. T Th
he
e nno
or
rm
ma
al
l rre
ea
ad
di
in
ng
g lli
ie
es
s bbe
et
tw
we
ee
en
n 112
2 aan
nd
d 115
5 VV.
. IIf
f tth
he
e
v vo
ol
lt
ta
ag
ge
e ffa
al
ll
ls
s bbe
el
lo
ow
w 112
2 VV wwi
it
th
h tth
he
e een
ng
gi
in
ne
e rru
un
nn
ni
in
ng
g,
, hha
av
ve
e tth
he
e ppo
ow
we
er
r
s su
up
pp
pl
ly
y ((b
ba
at
tt
te
er
ry
y aan
nd
d gge
en
ne
er
ra
at
to
or
r)
) cch
he
ec
ck
ke
ed
d aat
t aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e
C Ce
en
nt
tr
re
e
⇒"
"W
Wa
ar
rn
ni
in
ng
g lla
am
mp
ps
s"
" cch
ha
ap
pt
te
er
r.
.
During engine starting the voltage can fall below 8 V.
K
220
260
240
88
AL0-074Fig. 51
Page 58 of 272
Instrument panel54
M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
na
al
l*
* sst
te
ee
er
ri
in
ng
g wwh
he
ee
el
l
Speed regulator*
R
Ro
oc
ck
ke
er
r bbu
ut
tt
to
on
n 1
Lower S SE
ET
T ––
area :
Press once – the actual speed is stored in memory.
Press twice – reduce speed
As long as you keep pressing this area speed will be reduced. The
speed reached when releasing will be stored in memory.
Upper R RE
ES
S ++
area:
Press once – returned to memorized position
Press twice – AccelerateAs long as you keep pressing this area speed will be increased.
The speed reached when releasing will be stored in memory.
R Ro
oc
ck
ke
er
r bbu
ut
tt
to
on
n
2
Lower area C CA
AN
NC
CE
EL
L
:
Press once – The speed regulator will disconnect briefly. The speed
to be maintained will be stored in memory. To return to the
memorized speed pressR RE
ES
S ++
once.
N No
ot
te
e
The speed regulator can be switched on or off with the sliding switch on the
indicator and dip light lever.
L Li
ig
gh
ht
ts
s
On the right there is a button* to connect and disconnect the
illumination of the multifunction steering wheel switches.
For more information
⇒"Speed cruise control" chapter.K
1
2
B45-379KFig. 52
Page 59 of 272
Instrument panel55
Safety FirstControls and equipment Tips and Maintenance Technical Data
Audio set*
R Ro
oc
ck
ke
er
r bbu
ut
tt
to
on
n 3
Press the upper area V VO
OL
L ++
: Increase volume
Press lower area V VO
OL
L ––
: Reduce volumeR Ro
oc
ck
ke
er
r bbu
ut
tt
to
on
n
4
Press upper area
• Forward station search (radio)
• Forward TIM messages (Navigation system*/Radio SCALA)
• Fast forward (cassette mode*)
• Forward title search (CD mode*)
Press lower area:
• Backward station search (radio)
• Backward TIM messages (Navigation system*/Radio SCALA)
• Fast backward (cassette mode*)
• Backward title search (CD mode*)
K
3
4
B45-380KFig. 53
Page 60 of 272
Instrument panel56
T Th
he
e lla
ay
yo
ou
ut
t oof
f tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
ps
s dde
ep
pe
en
nd
ds
s oon
n tth
he
e mmo
od
de
el
l vve
er
rs
si
io
on
n
a an
nd
d een
ng
gi
in
ne
e ffi
it
tt
te
ed
d.
.
The symbols shown here are also on the actual
warning lamps.
W Wa
ar
rn
ni
in
ng
g lla
am
mp
ps
s
Overview of the warning lamps
Fig. 54
1/ 2
0
1/190
6012 0
0 2
15
6 4
7
8
1/ m i n
x1000
3
0 20 40608010 0
14 0
18 0
220
260
30507090
12 0
16 0
200
240
Km/h1
PRN 3218888888888 8service88:88
EPC
!
1234716151413
12
24221917
1110568
9
23211820
7
AL0-075