check engine light Seat Alhambra 2005 Owner's Manual

Instrument panel58
Air Bag
The warning lamp lights for a few seconds when switching on the
ignition. If the passenger’s Air Bag is deactivated the warning lamp
will flash for approximately 12 seconds
⇒chapter "Air Bag
system”.
If the warning lamp does not go out, lights up or flashes while
driving it indicates that Air Bag is not in order. Proceed
immediately to a Technical Service Centre to have it checked.
K
Trailer turn signals*
The warning lamp* flashes when turn signals are switched on
while towing a trailer.
If a turn signal fails on the trailer or vehicle, the warning lamp does
not flash.
K
Cruise control*
The warning lamp flashes if the cruise control is switched on. For
more information see the "Cruise control" chapter.
K
Selector lever lock
The warning lamp lights up when the selector lever is in position P
and N. To unlock it is necessary to press the brake pedal
⇒chapter
"Automaticgear".
K
Rear fog light
The warning lamp lights up when the rear fog light is switched on.
For more details
⇒"Switches" chapter.K
Pre-heating system
(Diesel engines only)
The warning lamp lights up when the ignition is switched on and
the engine is cold.
If the warning lamp does not light up there is a failure in the pre-
heating system. Seek expert help.
Start the engine once the warning lamp goes out
⇒"Starting
engine" chapter.
If the engine isa at
t oop
pe
er
ra
at
ti
io
on
na
al
l tte
em
mp
pe
er
ra
at
tu
ur
re
e
, the warning lamp does
not come on; you can drive immediately.
If there was an engine failure in the diesel engine while driving, the
warning lamp would flash. The engine must be checked as soon as
possible by a Technical Service Centre.
K
Turn signals
The warning lamp flashes at the same time as the indicator. If a
turn signal fails the warning lamp flashes approximately twice as
fast. Not applicable when towing a trailer.
For more details
⇒"Indicators and dipped beam lever" chapter.K

Instrument panel59
Safety FirstControls and equipment Tips and Maintenance Technical Data
Engine failure*
P Pe
et
tr
ro
ol
l een
ng
gi
in
ne
e
D Di
ie
es
se
el
l een
ng
gi
in
ne
e
If there was an engine failure while driving, the corresponding
warning lamp would light (petrol engine) or would start to flash
(diesel engine). The engine must be checked as soon as possible
by a Technical Service Centre.
K
Main beam
The warning lamp comes on when the beam is on or when the
headlight flasher is used.
K
Diagnosis*
The warning lamp will flash in the event of a breakdown in the
petrol engine’s electrical system while driving. The engine must be
checked as soon as possible by a Technical Service Centre.
K
Wheel spin regulator of the driving wheels (TCS)
The warning lamp comes on when the ignition is switched on, and
should go out after about 2 seconds.
If the TCS works while the vehicle is in motion, the warning lamp
flashes.
If the system is disconnected or has a fault, the warning lamp will
stay on.As the TCS works in combination with the ABS, if the ABS breaks
down the TCS warning lamp also comes on.
For more information see page 164.
K
Electronic stability program (ESP)*
The warning lamp comes on when the ignition is switched on, and
should go out after about 2 seconds.
If the ESP works while the vehicle is in motion, the warning lamp
flashes.
If the system is disconnected or has a fault, the warning lamp will
stay on.
As the ESP works in combination with the ABS, if the ABS breaks
down the ESP warning lamp also comes on.
For more information see page 165.
K
Anti-locking brake system (ABS)*
This warning lamp monitors the ABS and EDS* systems.
A An
nt
ti
i-
-l
lo
oc
ck
k bbr
ra
ak
ke
e ssy
ys
st
te
em
m ((A
AB
BS
S)
)*
*
The warning lamp comes on for a few seconds when the ignition is
switched on or the engine started. The lamp goes out after an
automatictest sequence has been completed.
If the ABS warning lamp does not come on when the ignition is
switched on, does not go out or comes on when driving, the
system is faulty.


Instrument panel61
Safety FirstControls and equipment Tips and Maintenance Technical Data
Alternator
The warning lamp will come on when the ignition is switched on. It
must go out after the engine has been started.
The alternator is driven by a long-life ribbed belt.
If the warning lamp comes on while driving, s st
to
op
p,
, ttu
ur
rn
n oof
ff
f een
ng
gi
in
ne
e
and check ribbed belt.
If the belt is loose or broken, d do
o nno
ot
t ddr
ri
iv
ve
e
since the coolant pump
is no longer being driven. The belt must be checked or replaced.
If the warning lamp comes on even though the ribbed belt is not
broken or loose, one can proceed normally to the nearest Technical
Service Centre.
Since the battery will continue to discharge it is advisable to switch
off all unessential electrical consumers.
K
Seat belt warning lamp*
This warning lamp (only in some countries) lights for about 6
seconds when the ignition is switched on as a reminder to fasten
your seat belts.
If the seat belt is not fastened an acoustic signal will sound after
switching on the ignition which will stop after about 6 seconds or
when the seat belt is fastened.
Check the "Seat belts" chapter.
K
Fuel reserve*
The warning lamp will light up once there are about 7/81)liters left
in the tank. An acoustic signal will sound at the same time.
K
Headlight failure*
This warning lamp lights if there is a defect in the main beam.K
Open tailgate warning lamp*
This warning lamp comes on when the tailgate is open.
This warning lamp goes out only if the bonnet/tailgate is
completely closed.
K
I If
f bbo
ot
th
h tth
he
e bbr
ra
ak
ke
e aan
nd
d AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
ps
s cco
om
me
e oon
n,
, tth
hi
is
s mma
ay
y bbe
e rre
el
la
at
te
ed
d tto
o aa
d de
ef
fe
ec
ct
t iin
n tth
he
e AAB
BS
S rre
eg
gu
ul
la
at
ti
io
on
n wwh
hi
ic
ch
h cco
ou
ul
ld
d,
, uun
nd
de
er
r cce
er
rt
ta
ai
in
n cci
ir
rc
cu
um
ms
st
ta
an
nc
ce
es
s,
,
c ca
au
us
se
e tth
he
e rre
ea
ar
r oof
f tth
he
e vve
eh
hi
ic
cl
le
e tto
o ssp
pi
in
n oou
ut
t.
.
P Pr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n tto
o hha
av
ve
e tth
he
e ffa
au
ul
lt
t rre
ep
pa
ai
ir
re
ed
d.
.
K
W WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
1)Four-wheel drive.

Instrument panel62
Windscreen washer fluid level*
This warning lamp will light up if the fluid level in the windscreen
washer container is too low.
Add water for the windscreen washers and headlight washers*
⇒
"Windscreen washer" chapter.K
Open door warning lamp*
This warning lamp will light up if any of the doors is open or not
properly closed.
K
Brake pad wear monitor*
The warning lamp will light up if the frontpads are worn out.
You should proceed immediately to a Technical Service Centre to
have the brake pads checked.
Since this warning lamp indicates the wear of the frontpads only,
it is advisable to have the rear brake pads checked at the same
time.
K
Engine oil pressure/level*
The warning lamp lights up for a few seconds as a functional check
when ignition is switched on.
If the warning lamp is red or yellow or flashes it indicates that the
engine oil pressure or level is too low. This warning lamp will also
light up if there is a defect in the oil level indicator.I If
f lli
ig
gh
ht
ts
s uup
p oor
r ffl
la
as
sh
he
es
s rre
ed
d ((i
in
ns
su
uf
ff
fi
ic
ci
ie
en
nt
t ooi
il
l ppr
re
es
ss
su
ur
re
e)
)
If the warning lamp lights up or flashes red while driving an
acoustic signal will sound three times at engine speeds above
1500 rpm. Stop and switch engine off: check oil level and add oil,
if necessary
⇒"Engine oil" chapter.
If the warning lamp flashes even though the oil level is in order, do
not continue driving. Do not even run the engine at idling speed.
Call in expert assistance.
If while driving the engine speed decreases below idling speed the
oil pressure warning lamp may light up. Increase engine speed by
accelerating or changing down gear.
L Li
ig
gh
ht
ts
s uup
p yye
el
ll
lo
ow
w ((o
oi
il
l lle
ev
ve
el
l*
* tto
oo
o llo
ow
w)
)
The yellow warning lamp indicates that the oil level is too low. Stop
engine and add oil
⇒"Engine oil" chapter.
When opening the bonnet the oil level warning is reset. However, if
you do not refill oil the warning will reappear after about 100 km.
F Fl
la
as
sh
he
es
s yye
el
ll
lo
ow
w ((d
de
ef
fe
ec
ct
ti
iv
ve
e ooi
il
l lle
ev
ve
el
l*
* iin
nd
di
ic
ca
at
to
or
r)
)
If the oil level indicator is defective an acoustic signal will sound
and the warning lamp will flash several times.
At the same time the onboard computer will display a warning for a
short time
⇒"Onboard computer" chapter. Take the vehicle to a
Technical Service Centre as soon as possible to have the engine
checked.
From the moment of the defect to the check-up of the engine the
oil level needs to be checked regularly, preferably when filling the
tank.
K

Instrument panel63
Safety FirstControls and equipment Tips and Maintenance Technical Data
Coolant temperature/level
The warning lamp lights up for a few seconds as a functional check
when ignition is switched on.
If the warning lamp does not go out, or lights up or flashes while
driving the coolant temperature is too high or the coolant level too
low. An acoustic signal will sound three times as an additional
warning:
Stop immediately, stop engine and check level. If necessary add
coolant. The coolant type is detailed in the "Coolant system"
chapter.
If the coolant level is in order the trouble may be due to failure of
the radiator fan. In this case, check radiator fan fuse and replace if
necessary.
If the warning lamp does not go out even though coolant level and
fan fuse are in order,d do
o nno
ot
t ddr
ri
iv
ve
e oon
n
. Call in expert assistance.
If the trouble is located only in the radiator fan and the coolant
level is in order and temperature warning lamp is off – you may
drive on to the nearest Technical Service Centre. To make use of the
air stream for cooling do not let engine idle nor drive very slowly.
K
• • NNe
ev
ve
er
r oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t iif
f yyo
ou
u sse
ee
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t cco
om
mi
in
ng
g ffr
ro
om
m tth
he
e
e en
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t!
! RRi
is
sk
k oof
f ssc
ca
al
ld
di
in
ng
g.
. WWa
ai
it
t uun
nt
ti
il
l nno
o mmo
or
re
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t
c ca
an
n bbe
e sse
ee
en
n.
.
• • DDo
o nno
ot
t tto
ou
uc
ch
h ffa
an
n.
. FFa
an
n cco
ou
ul
ld
d ssw
wi
it
tc
ch
h oon
n ssu
ud
dd
de
en
nl
ly
y eev
ve
en
n iif
f een
ng
gi
in
ne
e iis
s
s sw
wi
it
tc
ch
he
ed
d oof
ff
f.
.
W
WA
AR
RN
NI
IN
NG
G
• • PPl
le
ea
as
se
e nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s tto
o aav
vo
oi
id
d ssc
ca
al
ld
di
in
ng
g wwi
it
th
h hho
ot
t cco
oo
ol
la
an
nt
t:
:
– – EEx
xe
er
rc
ci
is
se
e cca
au
ut
ti
io
on
n wwh
he
en
n oop
pe
en
ni
in
ng
g tth
he
e cco
oo
ol
la
an
nt
t eex
xp
pa
an
ns
si
io
on
n tta
an
nk
k!
! WWh
he
en
n tth
he
e
e en
ng
gi
in
ne
e iis
s hho
ot
t tth
he
e cco
oo
ol
la
an
nt
t ssy
ys
st
te
em
m iis
s uun
nd
de
er
r ppr
re
es
ss
su
ur
re
e.
. LLe
et
t een
ng
gi
in
ne
e cco
oo
ol
l ddo
ow
wn
n
b be
ef
fo
or
re
e uun
ns
sc
cr
re
ew
wi
in
ng
g tth
he
e cca
ap
p.
.
– – TTo
o ppr
ro
ot
te
ec
ct
t yyo
ou
ur
r ffa
ac
ce
e,
, hha
an
nd
ds
s aan
nd
d aar
rm
ms
s ffr
ro
om
m sst
te
ea
am
m oor
r hho
ot
t ffl
lu
ui
id
d cco
ov
ve
er
r tth
he
e
c ca
ap
p wwi
it
th
h aa lla
ar
rg
ge
e ccl
lo
ot
th
h.
.
• • EEn
ns
su
ur
re
e tth
ha
at
t cco
oo
ol
la
an
nt
t ffl
lu
ui
id
d ddo
oe
es
s nno
ot
t ddr
ro
op
p oon
n tth
he
e hho
ot
t eex
xh
ha
au
us
st
t oor
r aan
ny
y oot
th
he
er
r
h ho
ot
t een
ng
gi
in
ne
e cco
om
mp
po
on
ne
en
nt
t.
. TTh
he
e aan
nt
ti
if
fr
re
ee
ez
ze
e iin
n tth
he
e cco
oo
ol
la
an
nt
t cco
ou
ul
ld
d iig
gn
ni
it
te
e.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)

Instrument panel66
If this symbol continues to flash even though the oil level is in
order, d do
o nno
ot
t cco
on
nt
ti
in
nu
ue
e ddr
ri
iv
vi
in
ng
g
. The engine must not run even at
idle speed. Call in for expert assistance.
B Br
ra
ak
ke
e ssy
ys
st
te
em
m
This symbol checks three functions simultaneously:
1 1.
. BBr
ra
ak
ke
e ffl
lu
ui
id
d
The corresponding warning is:
"STOP. BRAKE FLUID
INSTRUCTIONS MANUAL".
This symbol appears if the brake fluid level is too low.
Stop the vehicle and check the brake fluid level.
2 2.
. AAB
BS
S,
, EED
DS
S*
*,
, TTC
CS
S*
* aan
nd
d EES
SP
P*
* ssy
ys
st
te
em
ms
s
The corresponding warning is:
"STOP BRAKES FAILURE
INSTRUCTIONS MANUAL".If the warning lamp for brakes flashes while the warning lamp for
ABS comes on the ABS system may be malfunctioning and the
normal brake system behavior may be altered.
For further information on the ABS system
⇒page 162.
The EDS and ABS system work together. If the EDS does not work
the ABS warning lamp will light up. This warning lamp will also
light up if the ASR and ESP fail. The vehicle should be taken to a
Technical Service Centre as soon as possible.
3 3.
. HHa
an
nd
d bbr
ra
ak
ke
e
The corresponding warning is:
"HAND BRAKE SET".
The warning lamp lights up if the h ha
an
nd
d bbr
ra
ak
ke
e iis
s sse
et
t
and the
ignition is switched on. It will disappear when the hand brake is
released. If not, there is a failure in the brake system.
If driving at more than 6 km/h an acoustic signal will sound.
I If
f tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l iin
n tth
he
e cco
on
nt
ta
ai
in
ne
er
r iis
s bbe
el
lo
ow
w tth
he
e ""M
MI
IN
N"
" mma
ar
rk
k,
, wwa
ai
it
t ffo
or
r
e ex
xp
pe
er
rt
t aas
ss
si
is
st
ta
an
nc
ce
e bbe
ef
fo
or
re
e ddr
ri
iv
vi
in
ng
g aag
ga
ai
in
n.
.
I If
f tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l iis
s cco
or
rr
re
ec
ct
t tth
he
e dde
ef
fe
ec
ct
t mma
ay
y bbe
e ddu
ue
e tto
o tth
he
e AAB
BS
S.
. IIf
f tth
he
e
r re
eg
gu
ul
la
at
ti
io
on
n ssy
ys
st
te
em
m oof
f tth
he
e AAB
BS
S ffa
ai
il
ls
s,
, tth
he
e rre
ea
ar
r wwh
he
ee
el
ls
s cco
ou
ul
ld
d llo
oc
ck
k qqu
ui
ic
ck
kl
ly
y wwh
he
en
n
b br
ra
ak
ki
in
ng
g aan
nd
d,
, uun
nd
de
er
r cce
er
rt
ta
ai
in
n cci
ir
rc
cu
um
ms
st
ta
an
nc
ce
es
s,
, cca
au
us
se
e tth
he
e rre
ea
ar
r oof
f tth
he
e vve
eh
hi
ic
cl
le
e tto
o
s sp
pi
in
n oou
ut
t.
.
P Pr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n tto
o hha
av
ve
e tth
he
e ffa
au
ul
lt
t rre
ep
pa
ai
ir
re
ed
d.
.
W
WA
AR
RN
NI
IN
NG
G
I If
f bbo
ot
th
h wwa
ar
rn
ni
in
ng
g lla
am
mp
ps
s aar
re
e oon
n sst
to
op
p tth
he
e vve
eh
hi
ic
cl
le
e aan
nd
d cch
he
ec
ck
k tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d
l le
ev
ve
el
l iin
n tth
he
e cco
on
nt
ta
ai
in
ne
er
r.
. IIf
f tth
he
e ffl
lu
ui
id
d lle
ev
ve
el
l iis
s uun
nd
de
er
r tth
he
e ""M
MI
IN
N"
" mma
ar
rk
k sst
to
op
p yyo
ou
ur
r
v ve
eh
hi
ic
cl
le
e aan
nd
d cca
al
ll
l ffo
or
r eex
xp
pe
er
rt
t aas
ss
si
is
st
ta
an
nc
ce
e.
.
I If
f tth
he
e ffl
lu
ui
id
d lle
ev
ve
el
l iis
s iin
n oor
rd
de
er
r tth
he
e ffa
ai
il
lu
ur
re
e mma
ay
y bbe
e ddu
ue
e tto
o tth
he
e AAB
BS
S.
. IIf
f tth
he
e AAB
BS
S
r re
eg
gu
ul
la
at
to
or
ry
y ssy
ys
st
te
em
m ffa
ai
il
ls
s,
, tth
he
e rre
ea
ar
r wwh
he
ee
el
ls
s cco
ou
ul
ld
d llo
oc
ck
k qqu
ui
ic
ck
kl
ly
y wwh
he
en
n bbr
ra
ak
ki
in
ng
g
a an
nd
d,
, uun
nd
de
er
r cce
er
rt
ta
ai
in
n cci
ir
rc
cu
um
ms
st
ta
an
nc
ce
es
s,
, cca
au
us
se
e tth
he
e rre
ea
ar
r oof
f tth
he
e vve
eh
hi
ic
cl
le
e tto
o ssp
pi
in
n oou
ut
t.
.
P Pr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n tto
o hha
av
ve
e tth
he
e ffa
au
ul
lt
t rre
ep
pa
ai
ir
re
ed
d.
.
W
WA
AR
RN
NI
IN
NG
G


Instrument panel67
Safety FirstControls and equipment Tips and Maintenance Technical Data
C Co
oo
ol
la
an
nt
t tte
em
mp
pe
er
ra
at
tu
ur
re
e/
/l
le
ev
ve
el
l
The corresponding warning is:
"STOP CHECK COOLANT
INSTRUCTIONS MANUAL".
If this symbol flashes while driving the coolant temperature is too
high or the coolant level is too low:
S St
to
op
p vve
eh
hi
ic
cl
le
e iim
mm
me
ed
di
ia
at
te
el
ly
y,
, sst
to
op
p een
ng
gi
in
ne
e
and check level. If
necessary, add coolant. The coolant type to be used is described in
the "Coolant system" chapter.
If the level is in order the failure may be due to the fan. In thiscase,
check the radiator fan fuse and replace, if necessary.
If the warning lamp does not go out even though the coolant level
is correct and the fan fuse is in order, d do
o nno
ot
t ddr
ri
iv
ve
e oon
n
. Call in expert
assistance.
If the trouble is located only in the radiator fan and the coolant
level is in order and temperature warning lamp is off – you may
drive on to the nearest Technical Service Centre. To make good use
of the air stream for cooling purposes, neither allow engine idle
nor drive very slowly.A Al
lt
te
er
rn
na
at
to
or
r
The corresponding warning lamp is:
"ALTERNATOR WORKSHOP!"
The warning lamp lights up when switching on the ignition. It must
go out once the engine is switched on.
The alternator is driven by a long-life ribbed belt.
If the warning lamp comes on while driving, s st
to
op
p,
, ttu
ur
rn
n oof
ff
f tth
he
e
e en
ng
gi
in
ne
e
and check ribbed belt.
If the belt isl lo
oo
os
se
e
or broken, d do
o nno
ot
t ddr
ri
iv
ve
e
since the coolant pump
is no longer being driven. The belt must be checked or replaced.
If the warning lamp comes on even though the ribbed belt is not
broken or loose, one can proceed normally to the nearest Technical
Service Centre.
Since the battery will continue to discharge it is advisable to switch
off all unessential electrical consumers.
• • NNe
ev
ve
er
r oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t iif
f yyo
ou
u sse
ee
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t cco
om
mi
in
ng
g ffr
ro
om
m
t th
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t!
! RRi
is
sk
k oof
f ssc
ca
al
ld
di
in
ng
g.
. WWa
ai
it
t uun
nt
ti
il
l nno
o mmo
or
re
e sst
te
ea
am
m oor
r
c co
oo
ol
la
an
nt
t cca
an
n bbe
e sse
ee
en
n.
.
• • DDo
o nno
ot
t tto
ou
uc
ch
h ffa
an
n.
. FFa
an
n cco
ou
ul
ld
d ssw
wi
it
tc
ch
h oon
n ssu
ud
dd
de
en
nl
ly
y eev
ve
en
n iif
f een
ng
gi
in
ne
e iis
s
s sw
wi
it
tc
ch
he
ed
d oof
ff
f.
.
W
WA
AR
RN
NI
IN
NG
G
• • PPl
le
ea
as
se
e nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s tto
o aav
vo
oi
id
d ssc
ca
al
ld
di
in
ng
g wwi
it
th
h hho
ot
t cco
oo
ol
la
an
nt
t:
:
– – EEx
xe
er
rc
ci
is
se
e cca
au
ut
ti
io
on
n wwh
he
en
n oop
pe
en
ni
in
ng
g tth
he
e cco
oo
ol
la
an
nt
t eex
xp
pa
an
ns
si
io
on
n tta
an
nk
k!
! WWh
he
en
n tth
he
e
e en
ng
gi
in
ne
e iis
s hho
ot
t tth
he
e cco
oo
ol
la
an
nt
t ssy
ys
st
te
em
m iis
s uun
nd
de
er
r ppr
re
es
ss
su
ur
re
e.
. LLe
et
t een
ng
gi
in
ne
e cco
oo
ol
l ddo
ow
wn
n
b be
ef
fo
or
re
e uun
ns
sc
cr
re
ew
wi
in
ng
g tth
he
e cca
ap
p.
.
– – TTo
o ppr
ro
ot
te
ec
ct
t yyo
ou
ur
r ffa
ac
ce
e,
, hha
an
nd
ds
s aan
nd
d aar
rm
ms
s ffr
ro
om
m sst
te
ea
am
m oor
r hho
ot
t ffl
lu
ui
id
d cco
ov
ve
er
r tth
he
e
c ca
ap
p wwi
it
th
h aa lla
ar
rg
ge
e ccl
lo
ot
th
h.
.
• • EEn
ns
su
ur
re
e tth
ha
at
t cco
oo
ol
la
an
nt
t ffl
lu
ui
id
d ddo
oe
es
s nno
ot
t ddr
ro
op
p oon
n tth
he
e hho
ot
t eex
xh
ha
au
us
st
t oor
r aan
ny
y oot
th
he
er
r
h ho
ot
t een
ng
gi
in
ne
e cco
om
mp
po
on
ne
en
nt
t.
. TTh
he
e aan
nt
ti
if
fr
re
ee
ez
ze
e iin
n tth
he
e cco
oo
ol
la
an
nt
t cco
ou
ul
ld
d iig
gn
ni
it
te
e.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)


Instrument panel68
S Se
ea
at
t bbe
el
lt
t wwa
ar
rn
ni
in
ng
g lla
am
mp
p
The corresponding warning lamp is:
"FASTEN SEAT BELT".
This warning lamp (only in some countries) lights up for about 6
seconds when the ignition is switched on as a reminder to fasten
your seat belts.
If the seat belt is not fastened an acoustic signal will sound after
switching on the ignition which will stop after about 6 seconds or
when the seat belt is fastened.
⇒"Seat belts" chapter.K
Priority 2 (yellow symbols)
An acoustic signal will sound if a yellow symbol appears. The
symbol is an indication of danger. The function must be checked as
soon as possible. If there are several failures at the same time, the
symbols will appear consecutively for about 2 seconds.
I In
ns
su
uf
ff
fi
ic
ci
ie
en
nt
t ooi
il
l lle
ev
ve
el
l
The corresponding warning lamp is:
"CHECK OIL LEVEL".
If the symbol lights: stop vehicle and switch off engine! Check oil
level and, if necessary, add oil
⇒"Engine oil" chapter.D De
ef
fe
ec
ct
ti
iv
ve
e ooi
il
l gga
au
ug
ge
e
The corresponding warning lamp is:
"OIL SENSOR WORKSHOP!"
If the symbol flashes it probably means that the oil level sensor is
defective. Head immediately to a Technical Service Centre. You may
continue motoring, but you should check the oil level regularly, for
instance, every time you stop to fill up.
E En
ng
gi
in
ne
e ffa
ai
il
lu
ur
re
e
• • PPe
et
tr
ro
ol
l een
ng
gi
in
ne
e
• • DDi
ie
es
se
el
l een
ng
gi
in
ne
e
The corresponding warning lamp is:
"ENGINE FAILURE WORKSHOP".
If there was an electrical engine failure while driving the
corresponding warning lamp would light up (petrol engine) or flash
(diesel engine). The engine must be checked by a Technical Service
Centre immediately.
A An
nt
ti
i-
-b
bl
lo
oc
ck
k ssy
ys
st
te
em
m ((A
AB
BS
S)
)*
*
The corresponding warning sign is:
"ABS FAILURE".
A failure of the ABS system is indicated as follows:
I If
f tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s sse
ep
pa
ar
ra
at
te
el
ly
y
you may brake the
vehicle with the normal brake system without ABS. Nevertheless,
contact a Technical Service Centre as soon as possible.
For more information on the EDS system
⇒page 164.

165 Intelligent technology
Safety FirstControls and equipment Tips and Maintenance Technical Data
– To go up slopes where each traction wheel is on a surface with a
very different grip (I.e. ice on the left, dry asphalt on the right). The
EDS continues to function under these conditions.
Afterwards you should always reconnect this device.
N No
ot
te
e
For the TCS to work properly all four wheels should be the same. Otherwise
engine performance may be reduced.
⇒“Changing wheels”. K
E El
le
ec
ct
tr
ro
on
ni
ic
c SSt
ta
ab
bi
il
li
it
ty
y PPr
ro
og
gr
ra
am
m ((E
ES
SP
P)
)*
*
The ESP increases the control over the vehicle in situations such as
accelerating or in turns.
The ESP expands the functions of the ABS/TCS and decreases
under any circumstance the risk of skidding. This contributes to an
improved stability of the vehicle.The system works in the realm of speed in relation to the ABS. In
case of a failure of the ABS, the ESP will also fail.
The ESP connects automatically when the engine is switched on
and checks itself.
If needed, the system can be switched on or off by pressing the
button.
When the system is off, the ESP warning light will light up
⇒
"Warning lights" chapter.
The ESP should always be connected. Only in exceptional cases,
when the skidding effect is desired under extremely sporty
conditions, the system can be disconnected.
Afterwards the system should be reconnected.
The ABS and EDS
⇒"Switches" chapter remain connected even
when the ESP is off.
F Fu
un
nc
ct
ti
io
on
ni
in
ng
g
The electronic stability program encompasses the ABS, EDS and
TCS. In addition to all available data for these functions, the ESP
control unit needs additional measurements supplied by high
precision sensors. The measuring data consists of the speed at
which the vehicle turns around its vertical axis, acceleration,
pressure on brakes and the turn of the steering wheel.
With the help of the steering wheel sensor and the vehicle’s
speed, the desired direction is determined and constantly
compared to the vehicle’s real behavior. When differences occur,
such as incipient skidding, the ESP automatically brakes the
adequate wheel.
D Dr
ri
iv
vi
in
ng
g sst
ty
yl
le
e ssh
ho
ou
ul
ld
d aal
lw
wa
ay
ys
s bbe
e mmo
od
di
if
fi
ie
ed
d tto
o ssu
ui
it
t tth
he
e ttr
ra
af
ff
fi
ic
c aan
nd
d rro
oa
ad
d
c co
on
nd
di
it
ti
io
on
ns
s.
. TTh
he
e ggr
re
ea
at
te
er
r ssa
af
fe
et
ty
y ppr
ro
ov
vi
id
de
ed
d bby
y tth
he
e TTC
CS
S ssh
ho
ou
ul
ld
d nno
ot
t lle
ea
ad
d yyo
ou
u tto
o
t ta
ak
ke
e ggr
re
ea
at
te
er
r rri
is
sk
ks
s.
.
W
WA
AR
RN
NI
IN
NG
G


170Your vehicle and the environment
Suggestion 3. Avoid driving at maximum speed
Try not to drive at maximum speed. The increase of fuel
consumption, exhaust pollution and noise is disproportionate at
high speeds.
The illustration shows the relation between consumption
(l/100 km) and speed (km/h)
⇒fig. 152.
If only about 3 quarters of top speed is utilized, the fuel
consumption will be reduced by about half.
Suggestion 4. Decrease idling
It is worth switching off1)the engine in traffic jams, at railroad
crossings and at traffic lights with a long red light. The savings in
fuel after 30-40 seconds with the engine switched off is higher
than the fuel used to switch the engine on again.
K
Suggestion 5. Periodic revisions
Your fuel savings are guaranteed even before going on a trip with
periodic revisions by your Technical Service Centre. Proper engine
maintenance is not only a safety and maintenance issue but also a
fuel consumption issue.
Poor fine tuning of the engine may increase fuel consumption by
up to 10%.
Check the oil level every time you fill up. The oil consumption
depends largely on the engine load. Depending on the driving
style, the oil consumption can be up to 1.0 l/1000 km.
Another suggestion: You can also lower oil consumption by using
synthetic oils.
K
km/h
max
l/100km
B45-355PFig. 152
1)Statutory regulations must be respected.
D Dr
ri
iv
vi
in
ng
g aat
t hhi
ig
gh
h ssp
pe
ee
ed
ds
s dde
ec
cr
re
ea
as
se
es
s rro
oa
ad
d ssa
af
fe
et
ty
y.
.
K
W WA
AR
RN
NI
IN
NG
G